6EP1321-5BA00 Bộ nguồn 12VDC/2A (in 100-230VAC/110-300VDC) SITOP PSU100C

Name: Bộ nguồn 12VDC/2A (in 100-230VAC/110-300VDC) SITOP PSU100C 6EP1321-5BA00
SKU: 6EP1321-5BA00

Liên hệ

SITOP PSU100C 12 V/2 A Stabilized power supply input: 100-230 V AC (DC 110-300 V) output: 12 V DC/2 A.

Tải về datasheet (pdf): Tại đây!

6EP1321-5BA00 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP1321-5BA00 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1321-5BA00 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bộ nguồn 12VDC/2A (in 100-230VAC/110-300VDC) SITOP PSU100C 6EP1321-5BA00

Mục lục

Bảng tóm tắt thông số kỹ thuật 6EP1321-5BA00

SITOP PSU100C 12 V/2 A Stabilized power supply input: 100-230 V AC (DC 110-300 V) output: 12 V DC/2 A

Mã sản phẩm	6EP1321-5BA00
Dòng sản phẩm	SITOP PSU100C
Hãng sản xuất	SIEMENS
Nguồn đầu vào	100-230 V AC (DC 110-300 V)
Nguồn đầu ra	12 V DC/2 A
Kích thước (RxCxS)	30 x 80 x 100 mm
Trọng lượng	120 g

Bảng chi tiết thông số kỹ thuật 6EP1321-5BA00

Article number	6EP1321-5BA00
Product	SITOP PSU100C
Power supply, type	12 V/2 A
Input
Input	1-phase AC or DC
Rated voltage value Vin rated	100 … 230 V
Voltage range AC	85 … 264 V
input voltage
● at DC	110 … 300 V
Wide-range input	Yes
Overvoltage resistance	2.3 × Vin rated, 1.3 ms
Mains buffering	at Vin = 230 V
Mains buffering at Iout rated, min.	20 ms; at Vin = 230 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
input current
● at rated input voltage 100 V	0.63 A
● at rated input voltage 230 V	0.31 A
Switch-on current limiting (+25 °C), max.	33 A
I²t, max.	1.2 A²·s
Built-in incoming fuse	internal
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: from 16 A characteristic B or from 10 A characteristic C
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	12 V

● output voltage at output 1 at DC rated value	12 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	0.5 %
Static load balancing, approx.	1 %
Residual ripple peak-peak, max.	200 mV
Residual ripple peak-peak, typ.	40 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	300 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)	50 mV
Adjustment range	10.5 … 12.9 V
product function output voltage adjustable	Yes
Output voltage setting	via potentiometer
Status display	Green LED for output voltage OK
On/off behavior	Overshoot of Vout approx. 5 %
Startup delay, max.	0.6 s
Voltage rise, typ.	10 ms
Rated current value Iout rated	2 A
Current range	0 … 2 A
● Note	+60 … +70 °C: Derating 2%/K; at +70 °C Iout rated 1.6 A
supplied active power typical	24 W
Parallel switching for enhanced performance	Yes; Start-up with single nominal load only
Numbers of parallel switchable units for enhanced performance	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	82 %
Power loss at Vout rated, Iout rated, approx.	5.8 W
power loss [W] during no-load operation maximum	0.75 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.1 %
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.	3 %
Load step setting time 10 to 90%, typ.	4 ms
Load step setting time 90 to 10%, typ.	3 ms
Protection and monitoring
Output overvoltage protection	Yes, according to EN 60950-1
Current limitation, typ.	2.4 A
property of the output short-circuit proof	Yes
Short-circuit protection	Electronic shutdown, automatic restart
Overload/short-circuit indicator	–
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I
leakage current
● maximum	3.5 mA
● typical	0.4 mA
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Explosion protection	IECEx Ex nA IIC T4 Gc; ATEX (EX) II 3G Ex nA IIC T4; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4
certificate of suitability NEC Class 2	No
FM approval	–
CB approval	Yes
certificate of suitability EAC approval	Yes
Marine approval	ABS, DNV GL
EMC
Emitted interference	EN 55022 Class B
Supply harmonics limitation	not applicable
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	-20 … +70 °C
— Note	with natural convection
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	screw-type terminals
Connections
● Supply input	L, N, PE: Removable screw terminal, each for 1 x 0.5 … 2.5 mm²
● Output	+: 1 screw terminal for 0.5 … 2.5 mm²; -: 2 screw terminals for 0.5 … 2.5 mm²
● Auxiliary	–
width of the enclosure	30 mm
height of the enclosure	80 mm
depth of the enclosure	100 mm
required spacing
● top	50 mm
● bottom	50 mm
● left	0 mm
● right	0 mm
Weight, approx.	0.12 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Snaps onto DIN rail EN 60715 35×7.5/15
electrical accessories	Removable spring-type terminal 6EP1971-5BA00
MTBF at 40 °C	3 737 060 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP1321-5BA00

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1321-5BA00 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.