6EP3424-8UB00-0AY0 Bộ nguồn 12VDC/20A (400-500VAC) SITOP PSU3800

Name: Bộ nguồn 12VDC/20A (400-500VAC) SITOP PSU3800 6EP3424-8UB00-0AY0
SKU: 6EP3424-8UB00-0AY0

Liên hệ

SITOP PSU3800 12 V/20 A Regulated power supply input: 3 AC 400-500 V output: 12 V DC/20 A optimized for battery charging.

Tải về datasheet (pdf): Tại đây!

6EP3424-8UB00-0AY0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP3424-8UB00-0AY0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3424-8UB00-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bộ nguồn 12VDC/20A (400-500VAC) SITOP PSU3800 6EP3424-8UB00-0AY0

Mục lục

Bảng tóm tắt thông số kỹ thuật 6EP3424-8UB00-0AY0

SITOP PSU3800 12 V/20 A Regulated power supply input: 3 AC 400-500 V output: 12 V DC/20 A optimized for battery charging

Mã sản phẩm	6EP3424-8UB00-0AY0
Dòng sản phẩm	SITOP PSU3800
Hãng sản xuất	SIEMENS
Nguồn đầu vào	3 AC 400-500 V
Nguồn đầu ra	12 V DC/20 A
Kích thước (RxCxS)	70 x 125 x 125 mm
Trọng lượng	1 200 g

Bảng chi tiết thông số kỹ thuật 6EP3424-8UB00-0AY0

Article number	6EP3424-8UB00-0AY0
Product	SITOP PSU3800
Power supply, type	12 V/20 A
Input
Input	3-phase AC
Rated voltage value Vin rated	400 … 500 V
Voltage range AC	320 … 575 V
Wide-range input	Yes
Mains buffering	at Vin = 400 V
Mains buffering at Iout rated, min.	15 ms; at Vin = 400 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
input current
● at rated input voltage 400 V	0.7 A
● at rated input voltage 500 V	0.6 A
Switch-on current limiting (+25 °C), max.	16 A
I²t, max.	0.8 A²·s
Built-in incoming fuse	none
Protection in the mains power input (IEC 898)	Required: 3-pole connected miniature circuit breaker 6 … 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489)
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	12 V

● output voltage at output 1 at DC rated value	12 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	0.2 %
Residual ripple peak-peak, max.	100 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	200 mV
Adjustment range	12 … 14 V
product function output voltage adjustable	Yes
Output voltage setting	via potentiometer; max. 240 W
Status display	Green LED for 12 V OK
Signaling	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for 12 V OK
On/off behavior	No overshoot of Vout (soft start)
Startup delay, max.	2.5 s
voltage increase time of the output voltage maximum	500 ms
Rated current value Iout rated	20 A
Current range	0 … 20 A
● Note	+60 … +70 °C: Derating 2%/K
supplied active power typical	240 W
constant overload current
● on short-circuiting during the start-up typical	22 A
Parallel switching for enhanced performance	Yes; switchable characteristic
Numbers of parallel switchable units for enhanced performance	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	91 %
Power loss at Vout rated, Iout rated, approx.	24 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	1 %
Load step setting time 50 to 100%, typ.	0.2 ms
Load step setting time 100 to 50%, typ.	0.2 ms
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.	2 %
Load step setting time 10 to 90%, typ.	0.2 ms
Load step setting time 90 to 10%, typ.	0.2 ms
setting time maximum	10 ms
Protection and monitoring
Output overvoltage protection	< 18 V
Current limitation, typ.	22 A
property of the output short-circuit proof	Yes
Short-circuit protection	Alternatively, constant current characteristic approx. 22 A or latching shutdown
enduring short circuit current RMS value
● typical	22 A
Overload/short-circuit indicator	LED yellow for “overload”, LED red for “latching shutdown”
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra low output voltage Vout according to EN 60950-1
Protection class	Class I
leakage current
● maximum	3.5 mA
● typical	0.9 mA
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
Explosion protection	IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4
certificate of suitability NEC Class 2	No
FM approval	–
CB approval	Yes
certificate of suitability EAC approval	Yes
Marine approval	ABS, DNV GL
EMC
Emitted interference	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	-25 … +70 °C
— Note	with natural convection
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	screw-type terminals
Connections
● Supply input	L1, L2, L3, PE: 1 screw terminal each for 0.2 … 4 mm² single-core/finely stranded
● Output	+, -: 2 screw terminals each for 0.2 … 4 mm²
● Auxiliary	13, 14 (alarm signal): 1 screw terminal each for 0.14 … 1.5 mm²; 15, 16 (Remote): 1 screw terminal each for 0.14 … 1.5 mm²
width of the enclosure	70 mm
height of the enclosure	125 mm
depth of the enclosure	125 mm
required spacing
● top	50 mm
● bottom	50 mm
● left	0 mm
● right	0 mm
Weight, approx.	1.2 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Snaps onto DIN rail EN 60715 35×7.5/15
electrical accessories	Buffer module
mechanical accessories	Device identification label 20 mm × 7 mm, pale turquoise 3RT1900-1SB20
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP3424-8UB00-0AY0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3424-8UB00-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.