6EP3343-0SA00-0AY0 Bộ nguồn 3-52VDC/10A/120W (120-230VAC) SITOP PSU3600

Name: Bộ nguồn 3-52VDC/10A/120W (120-230VAC) SITOP PSU3600 6EP3343-0SA00-0AY0
SKU: 6EP3343-0SA00-0AY0

Liên hệ

SITOP PSU3600 flexi Stabilized power supply Input: 120-230 V AC Output: 3-52 V DC/10 A, 120 W.

Tải về datasheet (pdf): Tại đây!

6EP3343-0SA00-0AY0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP3343-0SA00-0AY0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3343-0SA00-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bộ nguồn 3-52VDC/10A/120W (120-230VAC) SITOP PSU3600 6EP3343-0SA00-0AY0

Mục lục

Bảng tóm tắt thông số kỹ thuật 6EP3343-0SA00-0AY0

SITOP PSU3600 flexi Stabilized power supply Input: 120-230 V AC Output: 3-52 V DC/10 A, 120 W

Mã sản phẩm	6EP3343-0SA00-0AY0
Dòng sản phẩm	SITOP PSU3600
Hãng sản xuất	SIEMENS
Nguồn đầu vào	120-230 V AC
Nguồn đầu ra	3-52 V DC/10 A, 120 W
Kích thước (RxCxS)	42 x 125 x 135 mm
Trọng lượng	550 g

Bảng chi tiết thông số kỹ thuật 6EP3343-0SA00-0AY0

Article number	6EP3343-0SA00-0AY0
Product	SITOP PSU3600 flexi
Power supply, type	3-52 V/10 A, 120 W
Input
Input	1-phase AC or DC
Rated voltage value Vin rated	120 … 230 V
Voltage range AC	85 … 264 V
● Note	Derating at < 110 V AC/DC: output power max. 100 W
supply voltage
● at DC	110 … 220 V
input voltage
● at DC	88 … 250 V
Wide-range input	Yes
Mains buffering	With Pa = 120 W and Ue = 230 V AC
Mains buffering at Iout rated, min.	80 ms; With Pa = 120 W and Ue = 230 V AC
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
input current
● at rated input voltage 120 V	2.6 A
● at rated input voltage 230 V	1.3 A
● at rated input voltage 110 V	1.3 A
● at rated input voltage 220 V	0.7 A
Switch-on current limiting (+25 °C), max.	35 A
I²t, max.	1 A²·s
Built-in incoming fuse	T 3.15 A (not accessible)
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: 6-10 A characteristic C
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V

● Output voltage	3-52 V DC
● output voltage at output 1 at DC rated value	24 V
Total tolerance, static ±	1 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	1 %
Sense line connection max. voltage control per line	0.5 V
Residual ripple peak-peak, max.	50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	100 mV
Adjustment range	0 … 52 V
product function output voltage adjustable	Yes
Output voltage setting	via potentiometer (setting range 3 to 52 V) or analog control voltage signal 0 to 2.5 V (setting range 0 to 52 V)
Status display	Two-color LED: green for 24 V o.k., red for overload
Signaling	DC OK via relay contact, current monitor signal (0 to 2.5 V correspond to 0 to 10 A)
On/off behavior	No overshoot of Vout (soft start)
Startup delay, max.	0.5 s
Voltage rise, typ.	20 ms
Rated current value Iout rated	10 A
Current range	0 … 10 A
● Note	Output power max. 120 W
supplied active power typical	120 W
constant overload current
● on short-circuiting during the start-up typical	12 A
● at short-circuit during operation typical	12 A
Parallel switching for enhanced performance	Yes
Numbers of parallel switchable units for enhanced performance	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	88 %
Power loss at Vout rated, Iout rated, approx.	16 W
power loss [W] during no-load operation maximum	3 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.3 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	5 %
setting time maximum	0.2 ms
Protection and monitoring
Output overvoltage protection	≤ 60 V according to EN 60950-1
Current limitation	2 … 10 A
Current limitation	Can be set with potentiometer or analog control voltage signal 0.5 … 2.5 V
property of the output short-circuit proof	Yes
Short-circuit protection	Electronic current limiting (2 … 10 A) in the range 3 … 12 V or power limiting (120 W) in the range 12 … 52 V
enduring short circuit current RMS value
● maximum	12 A
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra low output voltage Vout according to EN 60950-1
Protection class	Class I
leakage current
● maximum	3.5 mA
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
Explosion protection	–
certificate of suitability NEC Class 2	No
FM approval	–
CB approval	Yes
certificate of suitability EAC approval	Yes
Regulatory Compliance Mark (RCM)	Yes
Marine approval	–
EMC
Emitted interference	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	-25 … +70 °C
— Note	Derating > 60°C: 2%/°K
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	screw-type terminals
Connections
● Supply input	L1, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded
● Output	+, -: 2 screw terminals each for 0.5 … 2.5 mm² single-core/finely stranded
● Auxiliary	Alarm signals, control inputs: screw-type terminals for 0.14 … 1.5 mm² single-core/finely stranded
width of the enclosure	42 mm
height of the enclosure	125 mm
depth of the enclosure	135 mm
required spacing
● top	50 mm
● bottom	50 mm
● left	0 mm
● right	0 mm
Weight, approx.	0.55 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Snaps onto DIN rail EN 60715 35×7.5/15
MTBF at 40 °C	1 200 000 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP3343-0SA00-0AY0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3343-0SA00-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.