6ES7223-1QH32-0XB0 SM 1223 8DI/8DO SIMATIC S7-1200

4.181.000 

SIMATIC S7-1200, Digital I/O SM 1223, 8 DI AC/8 DO RLY, 8 DI 120/230 V AC, 8 DO relay 2 A

Tải về datasheet (pdf): Tại đây!

6ES7223-1QH32-0XB0 là mô đun mở rộng tín hiệu gõ vào/ ra cho PLC S7-1200 được hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC. Mô đun SM 1223 (6ES7223-1QH32-0XB0) được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, mua hay báo giá 6ES7223-1QH32-0XB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

6ES7223-1QH32-0XB0

Bảng tóm tắt thông số kỹ thuật 6ES7223-1QH32-0XB0

SIMATIC S7-1200, Digital I/O SM 1223, 8 DI AC/8 DO RLY, 8 DI 120/230 V AC, 8 DO relay 2 A

Mã sản phẩm 6ES7223-1QH32-0XB0
Dòng sản phẩm SIMATIC S7-1200 SM 1223
Hãng sản xuất SIEMENS
Số lượng đầu vào số 8 DI 120/230 V AC
Số lượng đầu ra số 8 DO relay 2 A
Nguồn cung cấp 24 V DC (20.4-28.8 V DC)
Kích thước (RxCxS) 45x100x75 mm
Trọng lượng 230 g

Bảng chi tiết thông số kỹ thuật 6ES7223-1QH32-0XB0

Article number 6ES7223-1QH32-0XB0
Digital I/O SM 1223, 8DI AC/ 8DO Rly
General information
Product type designation SM 1223, DI 8×120/230 V AC, DQ 8x relay
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
from backplane bus 5 V DC, max. 120 mA
Digital inputs
from load voltage L+ (without load), max.
Output voltage
Power supply to the transmitters
present Yes
Power loss
Power loss, typ. 7.5 W
Digital inputs
Number of digital inputs 8
in groups of 4
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 40 °C, max. 8
horizontal installation
— up to 40 °C, max. 8
— up to 50 °C, max. 8
vertical installation
— up to 40 °C, max. 8
Input voltage
Type of input voltage AC
Rated value (DC)
Rated value (AC) 120/230 V AC
for signal “0” 20 V AC at 1 mA
for signal “1” 79 V AC at 2.5 mA
Input current
for signal “0”, max. (permissible quiescent current) 1 mA
for signal “1”, min. 2.5 mA
for signal “1”, typ. 9 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
for interrupt inputs
— parameterizable Yes
Cable length
shielded, max. 500 m
unshielded, max. 300 m
Digital outputs
Number of digital outputs 8
in groups of 4
Short-circuit protection No; to be provided externally
Limitation of inductive shutdown voltage to
Switching capacity of the outputs
with resistive load, max. 2 A
on lamp load, max. 30 W with DC, 200 W with AC
Output voltage
Rated value (DC) 5 V DC to 30 V DC
Rated value (AC) 5 V AC to 250 V AC
for signal “0”, max.
for signal “1”, min.
Output current
for signal “1” rated value 2 A
for signal “1” permissible range, max. 2 A
for signal “0” residual current, max.
Output delay with resistive load
“0” to “1”, max. 10 ms
“1” to “0”, max. 10 ms
Total current of the outputs (per group)
horizontal installation
— up to 50 °C, max. 8 A; Current per mass
Relay outputs
Number of relay outputs 8
Rated supply voltage of relay coil L+ (DC) 24 V
Number of operating cycles, max. mechanically 10 million, at rated load voltage 100 000
Switching capacity of contacts
— with inductive load, max. 2 A
— on lamp load, max. 30 W with DC, 200 W with AC
— with resistive load, max. 2 A
Cable length
shielded, max. 500 m
unshielded, max. 150 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes
Diagnostics indication LED
for status of the inputs Yes
for status of the outputs Yes
Potential separation
Potential separation digital inputs
between the channels, in groups of 2
Potential separation digital outputs
between the channels Relays
between the channels, in groups of 2
between the channels and backplane bus 1 500 V AC for 1 minute
Permissible potential difference
between different circuits 750 V AC for 1 minute
Standards, approvals, certificates
CE mark Yes
CSA approval Yes
UL approval Yes
cULus Yes
FM approval Yes
RCM (formerly C-TICK) Yes
KC approval Yes
Marine approval Yes
Ambient conditions
Free fall
Fall height, max. 0.3 m; five times, in product package
Ambient temperature during operation
min. -20 °C
max. 60 °C; Number of simultaneously activated outputs: 4 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 8 at 55 °C horizontal or 45 °C vertical
horizontal installation, min. -20 °C
horizontal installation, max. 60 °C
vertical installation, min. -20 °C
vertical installation, max. 50 °C
permissible temperature change 5°C to 55°C, 3°C / minute
Ambient temperature during storage/transportation
min. -40 °C
max. 70 °C
Air pressure acc. to IEC 60068-2-13
Storage/transport, min. 660 hPa
Storage/transport, max. 1 080 hPa
Relative humidity
Operation at 25 ℃ without condensation, max. 95 %
Connection method
required front connector Yes
Mechanics/material
Enclosure material (front)
Plastic Yes
Dimensions
Width 45 mm
Height 100 mm
Depth 75 mm
Weights
Weight, approx. 230 g

Phân phối & báo giá 6ES7223-1QH32-0XB0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, mua hoặc báo giá 6ES7223-1QH32-0XB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Rate this product
Trọng lượng 0,230 kg
Kích thước 4,5 × 10 × 7,5 cm
Nhận thông báo qua Email
Nhận thông báo cho
guest

Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x