6EP3323-0SA00-0BY0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP3323-0SA00-0BY0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3323-0SA00-0BY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6EP3323-0SA00-0BY0
SITOP PSU3600 dual stabilized power supply Input: 120-230 V AC Output: 15 V/3,5 A 2x DC two potential-free outputs
Mã sản phẩm | 6EP3323-0SA00-0BY0 |
Dòng sản phẩm | SITOP PSU3600 |
Hãng sản xuất | SIEMENS |
Nguồn đầu vào | 120-230 V AC |
Nguồn đầu ra | 15 V/3,5 A 2x DC |
Kích thước (RxCxS) | 42 x 125 x 125 mm |
Trọng lượng | 550 g |
Bảng chi tiết thông số kỹ thuật 6EP3323-0SA00-0BY0
Article number | 6EP3323-0SA00-0BY0 |
Product | SITOP PSU3600 dual |
Power supply, type | 2 x 15 V/3.5 A |
Input | |
Input | 1-phase AC or DC |
Rated voltage value Vin rated | 120 … 230 V |
Voltage range AC | 85 … 264 V |
● Note | Derating at < 110 V AC/DC: output power max. 100 W |
input voltage | |
● at DC | 88 … 250 V |
Wide-range input | Yes |
Mains buffering | at Vin = 120 V, 40 ms at Vin = 187 V |
Mains buffering at Iout rated, min. | 10 ms; at Vin = 120 V, 40 ms at Vin = 187 V |
Rated line frequency 1 | 50 Hz |
Rated line frequency 2 | 60 Hz |
Rated line range | 47 … 63 Hz |
input current | |
● at rated input voltage 120 V | 2.2 A |
● at rated input voltage 230 V | 1.3 A |
● at rated input voltage 110 V | 1.3 A |
● at rated input voltage 220 V | 0.7 A |
Switch-on current limiting (+25 °C), max. | 35 A |
I²t, max. | 1 A²·s |
Built-in incoming fuse | T 3.15 A (not accessible) |
Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: 6-10 A characteristic C |
Output | |
Output | Controlled, isolated DC voltage |
number of outputs | 2 |
Rated voltage Vout DC | 15 V |
● Output voltage | 2 x 15 V DC |
● output voltage at output 1 at DC rated value | 15 V |
● output voltage at output 2 at DC rated value | 15 V |
Total tolerance, static ± | 1 % |
Static mains compensation, approx. | 0.1 % |
Static load balancing, approx. | 1 % |
Residual ripple peak-peak, max. | 50 mV |
Spikes peak-peak, max. (bandwidth: 20 MHz) | 150 mV |
Adjustment range | 12 … 28 V |
product function output voltage adjustable | Yes |
Output voltage setting | via potentiometer per output |
Status display | Green LED grün for Vout >10 V (summation display) |
Signaling | – |
On/off behavior | Overshoot of Vout < 1 % |
Startup delay, max. | 0.5 s |
Rated current value Iout rated | 3.5 A |
output current | |
● at output 1 rated value | 3.5 A |
● at output 2 rated value | 3.5 A |
Current range | 0 … 3.5 A |
● Note | Output power max. 60 W per output |
supplied active power typical | 105 W |
Parallel switching for enhanced performance | Yes |
Numbers of parallel switchable units for enhanced performance | 2 |
Efficiency | |
Efficiency at Vout rated, Iout rated, approx. | 88 % |
Power loss at Vout rated, Iout rated, approx. | 18 W |
Protection and monitoring | |
Output overvoltage protection | ≤ 35 V |
Current limitation | 5 A |
Current limitation | depending on the voltage setting |
property of the output short-circuit proof | Yes |
Short-circuit protection | Electronic shutdown, automatic restart |
Overload/short-circuit indicator | – |
Safety | |
Primary/secondary isolation | Yes |
galvanic isolation | Safety extra low output voltage Vout according to EN 60950-1 |
Protection class | Class I |
leakage current | |
● maximum | 3.5 mA |
Degree of protection (EN 60529) | IP20 |
Approvals | |
CE mark | Yes |
UL/cUL (CSA) approval | cULus-listed (UL 508, CSA C22.2 No. 107.1), file E197259; outputs NEC Class 2 acc. to UL 1310 |
Explosion protection | – |
certificate of suitability NEC Class 2 | Yes |
FM approval | – |
CB approval | No |
certificate of suitability EAC approval | Yes |
Regulatory Compliance Mark (RCM) | Yes |
Marine approval | – |
EMC | |
Emitted interference | EN 55022 Class B |
Supply harmonics limitation | EN 61000-3-2 |
Noise immunity | EN 61000-6-2 |
environmental conditions | |
ambient temperature | |
● during operation | -25 … +70 °C |
— Note | Derating > 60°C: 2%/°K |
● during transport | -40 … +70 °C |
● during storage | -40 … +70 °C |
Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
Mechanics | |
Connection technology | screw-type terminals |
Connections | |
● Supply input | L1, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded |
● Output | +: 1 screw terminal per output for 0.5 … 2.5 mm²; -: 2 screw terminals per output for 0.5 … 2.5 mm² |
● Auxiliary | – |
width of the enclosure | 42 mm |
height of the enclosure | 125 mm |
depth of the enclosure | 125 mm |
required spacing | |
● top | 50 mm |
● bottom | 50 mm |
● left | 0 mm |
● right | 0 mm |
Weight, approx. | 0.55 kg |
product feature of the enclosure housing can be lined up | Yes |
Installation | Snaps onto DIN rail EN 60715 35×7.5/15 |
other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối & báo giá 6EP3323-0SA00-0BY0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3323-0SA00-0BY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.