6EP1333-7CA00 Bộ nguồn 24VDC/5A (120/230VAC) SITOP PSU100P

Name: Bộ nguồn 24VDC/5A (120/230VAC) SITOP PSU100P 6EP1333-7CA00
SKU: 6EP1333-7CA00

Liên hệ

SITOP PSU100P IP67 Stabilized power supply input: 120/230 V AC, output: 24 V DC/5 A.

Tải về datasheet (pdf): Tại đây!

6EP1333-7CA00 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP1333-7CA00 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1333-7CA00 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bộ nguồn 24VDC/5A (120/230VAC) SITOP PSU100P 6EP1333-7CA00

Mục lục

Bảng tóm tắt thông số kỹ thuật 6EP1333-7CA00

SITOP PSU100P IP67 Stabilized power supply input: 120/230 V AC, output: 24 V DC/5 A

Mã sản phẩm	6EP1333-7CA00
Dòng sản phẩm	SITOP PSU100P
Hãng sản xuất	SIEMENS
Nguồn đầu vào	120/230 V AC
Nguồn đầu ra	24 V DC/5 A
Kích thước (RxCxS)	120 x 181 x 60.5 mm
Trọng lượng	1 100 g

Bảng chi tiết thông số kỹ thuật 6EP1333-7CA00

Article number	6EP1333-7CA00
Product	SITOP PSU100P
Power supply, type	24 V/5 A
Input
Input	1-phase AC
● Note	Automatic range selection
supply voltage
● 1 at AC rated value	120 V
● 2 at AC rated value	230 V
input voltage
● 1 at AC	85 … 132 V
● 2 at AC	170 … 264 V
Wide-range input	No
Overvoltage resistance	Implemented internally with varistor
Mains buffering	at Vin = 120/230 V
Mains buffering at Iout rated, min.	40 ms; at Vin = 120/230 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
input current
● at rated input voltage 120 V	2.25 A
● at rated input voltage 230 V	1.24 A
Switch-on current limiting (+25 °C), max.	15 A
I²t, max.	0.6 A²·s
Built-in incoming fuse	T 3.15 A
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: from 6 A characteristic C/B
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V
● output voltage at output 1 at DC rated value	24 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	0.2 %
Residual ripple peak-peak, max.	50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	100 mV
product function output voltage adjustable	No
Status display	Green LED: 24 V OK; red LED flashing: “overload/short-circuit”
Signaling	Relay contact (NO contact, rating 30 V AC/ 0.5 A; 30 V DC/1 A) for 24 V OK
On/off behavior	Overshoot of Vout < 3 %
Startup delay, max.	1.5 s
Voltage rise, typ.	22 ms
voltage increase time of the output voltage maximum	100 ms
Rated current value Iout rated	5 A
Current range	0 … 5 A
supplied active power typical	133 W
short-term overload current
● on short-circuiting during the start-up typical	20 A
● at short-circuit during operation typical	20 A
duration of overloading capability for excess current
● on short-circuiting during the start-up	50 ms
● at short-circuit during operation	50 ms
Parallel switching for enhanced performance	Yes; Symmetric wiring required
Numbers of parallel switchable units for enhanced performance	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	90 %
Power loss at Vout rated, Iout rated, approx.	12.9 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.2 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	1 %
setting time maximum	2 ms
Protection and monitoring
Output overvoltage protection	< 29 V
Current limitation, typ.	5.5 A
property of the output short-circuit proof	Yes
Short-circuit protection	Electronic shutdown, automatic restart
enduring short circuit current RMS value
● maximum	6 A
● typical	5 A
Overload/short-circuit indicator	Red LED flashing for “overload/short-circuit”
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I
leakage current
● maximum	3.5 mA
● typical	1 mA
Degree of protection (EN 60529)	IP67, enclosure type 5 indoor
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1)
Explosion protection	–
certificate of suitability NEC Class 2	No
FM approval	–
CB approval	No
certificate of suitability EAC approval	Yes
Marine approval	–
EMC
Emitted interference	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	-25 … +60 °C
— Note	with natural convection
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	3K6 without direct sunlight
Mechanics
Connection technology	screw-type terminals
Connections
● Supply input	L1, N, PE: Plug connector 7/8″ (counterpart see “Operating Instructions (compact)”)
● Output	+, -: Plug connector 7/8″ (counterpart see “Operating Instructions (compact)”)
● Auxiliary	Alarm signals: M12 plug-in connector 4-pin
product function
● removable terminal at input	Yes
● removable terminal at output	Yes
width of the enclosure	120 mm
height of the enclosure	181 mm
depth of the enclosure	60.5 mm
required spacing
● top	50 mm
● bottom	0 mm
● left	0 mm
● right	0 mm
Weight, approx.	1.1 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Wall mounting
MTBF at 40 °C	1 500 000 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP1333-7CA00

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1333-7CA00 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.