6ES7522-5EH00-0AB0 là mô đun mở rộng tín hiệu ngõ ra số cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. 6ES7522-5EH00-0AB0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7522-5EH00-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7522-5EH00-0AB0
SIMATIC S7-1500, digital output module DQ 16×24..48VUC/125V DC/0.5A ST; 16 channels in groups of 1; 0.5 A per group; substitute value: observe derating the module supports the safety-oriented shutdown of load groups up to SILCL2 acc. to EN 62061:2005 + A2:2015, and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately
Mã sản phẩm | 6ES7522-5EH00-0AB0 |
Dòng sản phẩm | SIMATIC S7-1500, SM 522 |
Hãng sản xuất | SIEMENS |
Số lượng đầu ra số | 16 DQ 24..48VUC/125V DC/0.5A ST |
Kích thước (RxCxS) | 35x147x129 mm |
Trọng lượng | 230 g |
Bảng chi tiết thông số kỹ thuật 6ES7522-5EH00-0AB0
Article number | 6ES7522-5EH00-0AB0 |
S7-1500, DQ 16×24…48VUC/125VDC/0.5A ST | |
General information | |
Product type designation | DQ 16×24 … 48 V UC/125 V DC/0.5 A ST |
HW functional status | FS02 |
Firmware version | |
● FW update possible | Yes |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Isochronous mode | No |
● Prioritized startup | Yes |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated from version | V13 SP1 / – |
● STEP 7 configurable/integrated from version | V5.5 SP3 / – |
● PROFIBUS from GSD version/GSD revision | V1.0 / V5.1 |
● PROFINET from GSD version/GSD revision | V2.3 / – |
Operating mode | |
● DQ | Yes |
● DQ with energy-saving function | No |
● PWM | No |
● Cam control (switching at comparison values) | No |
● Oversampling | No |
● MSO | Yes |
● Integrated operating cycle counter | No |
Supply voltage | |
Rated value (DC) | |
permissible range, lower limit (DC) | |
permissible range, upper limit (DC) | |
Reverse polarity protection | |
Input current | |
Current consumption, max. | |
Output voltage | |
Rated value (DC) | 24 V; 48 V, 125 V |
Rated value (AC) | 24 V; 48 V (50 – 60 Hz) |
Power | |
Power available from the backplane bus | 2 W |
Power loss | |
Power loss, typ. | 3.8 W |
Digital outputs | |
Type of digital output | Transistor |
Number of digital outputs | 16 |
Current-sinking | Yes |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | |
● Response threshold, typ. | |
Limitation of inductive shutdown voltage to | 200 V (suppressor diode) |
Controlling a digital input | Yes |
Digital output functions, parameterizable | |
● Freely usable digital output | |
● PWM output | |
— Number, max. | |
— Cycle duration, parameterizable | |
— ON period, min. | |
— ON period, max. | |
— Resolution of the duty cycle | |
— Minimum pulse duration | |
Switching capacity of the outputs | |
● with resistive load, max. | 0.5 A |
● on lamp load, max. | 40 W; At 125 V DC, 10 W at 48 V UC, 5 W at 24 V UC |
Load resistance range | |
● lower limit | |
● upper limit | |
Output voltage | |
● for signal “1”, min. | L+ (-1.0 V) |
Output current | |
● for signal “1” rated value | 0.5 A |
● for signal “1” permissible range, max. | 0.6 A |
● for signal “0” residual current, max. | |
Output delay with resistive load | |
● “0” to “1”, typ. | |
● “0” to “1”, max. | 5 ms |
● “1” to “0”, typ. | |
● “1” to “0”, max. | 5 ms |
Parallel switching of two outputs | |
● for logic links | Yes |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 25 Hz |
● with inductive load, max. | 0.5 Hz |
● on lamp load, max. | 10 Hz |
Total current of the outputs | |
● Current per channel, max. | 0.5 A |
● Current per group, max. | 0.5 A |
● Current per module, max. | 8 A |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Isochronous mode | |
Execution and activation time (TCO), min. | |
Bus cycle time (TDP), min. | |
Interrupts/diagnostics/status information | |
Diagnostics function | No |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | No |
● Maintenance interrupt | No |
Diagnoses | |
● Monitoring the supply voltage | No |
● Wire-break | No |
● Short-circuit | No |
● Group error | |
Diagnostics indication LED | |
● RUN LED | Yes; green LED |
● ERROR LED | Yes; red LED |
● MAINT LED | |
● Monitoring of the supply voltage (PWR-LED) | No |
● Channel status display | Yes; green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; red LED |
Potential separation | |
Potential separation channels | |
● between the channels | Yes |
● between the channels, in groups of | 1 |
● between the channels and backplane bus | Yes |
Permissible potential difference | |
between different circuits | 125 V DC/48 V AC |
Isolation | |
Isolation tested with | 2 000 V DC |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | Yes; From FS02 |
Highest safety class achievable for safety-related tripping of standard modules | |
● Performance level according to ISO 13849-1 | PL d |
● Category according to ISO 13849-1 | Cat. 3 |
● SILCL according to IEC 62061 | SILCL 2 |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C |
● vertical installation, max. | 40 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | |
Dimensions | |
Width | 35 mm |
Height | 147 mm |
Depth | 129 mm |
Weights | |
Weight, approx. | 230 g |
Nhà phân phối & báo giá 6ES7522-5EH00-0AB0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7522-5EH00-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.