6ES7522-5FF00-0AB0 là mô đun mở rộng tín hiệu ngõ ra số cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. 6ES7522-5FF00-0AB0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7522-5FF00-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Bảng tóm tắt thông số kỹ thuật 6ES7522-5FF00-0AB0
SIMATIC S7-1500, digital output module DQ 8×230 V AC/2 A ST; TRIAC; 8 channels in groups of 1; 2 A per group; Substitute value: Front connector (screw terminals or push-in) to be ordered separately
Mã sản phẩm | 6ES7522-5FF00-0AB0 |
Dòng sản phẩm | SIMATIC S7-1500, SM 522 |
Hãng sản xuất | SIEMENS |
Số lượng đầu ra số | 8 DQ 230 V AC/2 A ST (TRIAC) |
Kích thước (RxCxS) | 35x147x129 mm |
Trọng lượng | 290 g |
Bảng chi tiết thông số kỹ thuật 6ES7522-5FF00-0AB0
Article number | 6ES7522-5FF00-0AB0 |
S7-1500, DQ 8x230VAC/2A ST (Triac) | |
General information | |
Product type designation | DQ 8×230 V AC/2A ST (triac) |
HW functional status | FS01 |
Firmware version | |
● FW update possible | Yes |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Isochronous mode | No |
● Prioritized startup | Yes |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated from version | V12 / V12 |
● STEP 7 configurable/integrated from version | V5.5 SP3 / – |
● PROFIBUS from GSD version/GSD revision | V1.0 / V5.1 |
● PROFINET from GSD version/GSD revision | V2.3 / – |
Operating mode | |
● DQ | Yes |
● DQ with energy-saving function | No |
● PWM | No |
● Oversampling | No |
● MSO | Yes |
● Integrated operating cycle counter | |
Supply voltage | |
Rated value (DC) | |
permissible range, lower limit (DC) | |
permissible range, upper limit (DC) | |
Reverse polarity protection | |
Input current | |
Current consumption, max. | |
Output voltage | |
Rated value (AC) | 230 V; 120/230 V AC, 50/60 Hz |
Power | |
Power available from the backplane bus | 0.9 W |
Power loss | |
Power loss, typ. | 10.8 W |
Digital outputs | |
Type of digital output | Triac |
Number of digital outputs | 8 |
Current-sinking | |
Current-sourcing | Yes |
Digital outputs, parameterizable | Yes |
Short-circuit protection | No |
● built-in fuse | 6.3 A melting fuse, slow-blow |
Controlling a digital input | |
Switching capacity of the outputs | |
● with resistive load, max. | 2 A |
● on lamp load, max. | 50 W |
● Low energy/fluorescent lamps with electronic control gear | |
● Fluorescent tubes, conventionally compensated | |
● Fluorescent tubes, uncompensated | |
Output voltage | |
● for signal “1”, min. | L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current |
Output current | |
● for signal “1” rated value | 2 A |
● for signal “1” permissible range, min. | 10 mA |
● for signal “1” permissible range, max. | 15 A; max. 1 AC cycle |
● for signal “0” residual current, max. | 2 mA |
Output delay with resistive load | |
● “0” to “1”, max. | 1 AC cycle |
● “1” to “0”, max. | 1 AC cycle |
Parallel switching of two outputs | |
● for logic links | No |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 10 Hz |
● with inductive load, max. | 0.5 Hz |
● on lamp load, max. | 1 Hz |
Total current of the outputs | |
● Current per channel, max. | 2 A; see additional description in the manual |
● Current per group, max. | 2 A; see additional description in the manual |
● Current per module, max. | 10 A; see additional description in the manual |
Relay outputs | |
● Number of relay outputs | |
● Rated supply voltage of relay coil L+ (DC) | |
● Current consumption of relays (coil current of all relays), typ. | |
● external protection for relay outputs | |
● Contact connection (internal) | |
● Number of operating cycles, max. | |
● Relay approved acc. to UL 508 | |
Switching capacity of contacts | |
— with inductive load, max. | |
— with resistive load, max. | |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Interrupts/diagnostics/status information | |
Diagnostics function | No |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | No |
● Maintenance interrupt | No |
Diagnoses | |
● Monitoring the supply voltage | No |
● Wire-break | No |
● Short-circuit | No |
Diagnostics indication LED | |
● RUN LED | Yes; green LED |
● ERROR LED | Yes; red LED |
● MAINT LED | |
● Monitoring of the supply voltage (PWR-LED) | No |
● Channel status display | Yes; green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; red LED |
Potential separation | |
Potential separation channels | |
● between the channels | Yes |
● between the channels, in groups of | 1 |
● between the channels and backplane bus | Yes |
● Between the channels and load voltage L+ | |
● Between the channels and load voltage L1 | Yes |
Permissible potential difference | |
between different circuits | 250 V AC between the channels and the backplane bus; 500 V AC between the channels |
Isolation | |
Isolation tested with | 3 100 V DC |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | |
Highest safety class achievable for safety-related tripping of standard modules | |
● Performance level according to ISO 13849-1 | |
● Category according to ISO 13849-1 | |
● SILCL according to IEC 62061 | |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | 0 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | 0 °C |
● vertical installation, max. | 40 °C |
Dimensions | |
Width | 35 mm |
Height | 147 mm |
Depth | 129 mm |
Weights | |
Weight, approx. | 290 g |
Nhà phân phối & báo giá 6ES7522-5FF00-0AB0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7522-5FF00-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.