6ES7518-4AP00-0AB0 CPU 1518-4 PN/DP PLC S7-1500 SIEMENS

Name: 6ES7518-4AP00-0AB0 CPU 1518-4 PN/DP PLC S7-1500 SIEMENS
SKU: 6ES7518-4AP00-0AB0
Price: 160092000 VND
Availability: InStock

160.092.000 ₫

SIMATIC S7-1500, CPU 1518-4 PN/DP, Bộ nhớ: 6 MB cho chương trình và 60 MB cho dữ liệu, giao diện: PROFINET IRT với 2 cổng chuyển mạch, PROFINET RT, Ethernet, PROFIBUS, hiệu suất bit 1 NS, cần thêm thẻ nhớ SIMATIC để hoạt động.

Tải về datasheet (pdf): Tại đây!

6ES7518-4AP00-0AB0 là bộ điều khiển khả trình logic (PLC) nâng cao do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc dòng PLC S7-1500. 6ES7518-4AP00-0AB0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua bộ điều khiển 6ES7518-4AP00-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Mục lục

Bảng tóm tắt thông số kỹ thuật 6ES7518-4AP00-0AB0

SIMATIC S7-1500, CPU 1518-4 PN/DP, Bộ nhớ: 6 MB cho chương trình và 60 MB cho dữ liệu, giao diện: PROFINET IRT với 2 cổng chuyển mạch, PROFINET RT, Ethernet, PROFIBUS, hiệu suất bit 1 NS, cần thêm thẻ nhớ SIMATIC để hoạt động.

Mã sản phẩm	6ES7518-4AP00-0AB0
Dòng sản phẩm	SIMATIC S7-1500, CPU 1518-4 PN/DP
Hãng sản xuất	SIEMENS
Hiệu suất bit	21 ns
Giao diện	PROFINET IRT, PROFINET RT, Ethernet, PROFIBUS
Bộ nhớ	6 MB chương trình và 60 MB dữ liệu
Nguồn cung cấp	24 V DC (19.2-28.8 V DC)
Kích thước (RxCxS)	175x147x129 mm
Trọng lượng	1 988 g

Phụ kiện (tùy chọn) cho 6ES7518-4AP00-0AB0

6ES7954-8LC03-0AA0: SIMATIC S7, thẻ nhớ cho S7-1×00 CPU/SINAMICS, 3, 3 V Flash, 4 MB
6ES7954-8LE03-0AA0: SIMATIC S7, thẻ nhớ cho S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 12 MBYTE
6ES7954-8LF03-0AA0: SIMATIC S7, thẻ nhớ cho S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE
6ES7954-8LL03-0AA0: SIMATIC S7, thẻ nhớ cho S7-1X00 CPU, 3,3 V FLASH, 256 MBYTE
6ES7954-8LP02-0AA0: SIMATIC S7, thẻ nhớ cho S7-1x 00 CPU, 3, 3V Flash, 2 GByte
6ES7954-8LT03-0AA0: SIMATIC S7, thẻ nhớ cho S7-1×00 CPU, 3, 3V Flash, 32 GB

Bảng chi tiết thông số kỹ thuật 6ES7518-4AP00-0AB0

Article number	6ES7518-4AP00-0AB0
	CPU 1518-4 PN/DP, 4MB Prog., 20MB Data
General information
Product type designation	CPU 1518-4 PN/DP
HW functional status	FS10
Firmware version	V2.9
Product function
● I&M data	Yes; I&M0 to I&M3
● Isochronous mode	Yes; Distributed and central; with minimum OB 6x cycle of 125 µs (distributed) and 1 ms (central)
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	V17 (FW V2.9) / V13 (FW V1.5) or higher
Configuration control
via dataset	Yes
Display
Screen diagonal [cm]	6.1 cm
Control elements
Number of keys	6
Mode selector switch	1
Supply voltage
Type of supply voltage	24 V DC
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
Mains buffering
● Mains/voltage failure stored energy time	5 ms
● Repeat rate, min.	1/s
Input current
Current consumption (rated value)	1.55 A
Inrush current, max.	2.4 A; Rated value
I²t	0.02 A²·s
Power
Infeed power to the backplane bus	12 W
Power consumption from the backplane bus (balanced)	30 W
Power loss
Power loss, typ.	24 W
Memory
Number of slots for SIMATIC memory card	1
SIMATIC memory card required	Yes
Work memory
● integrated (for program)	6 Mbyte
● integrated (for data)	60 Mbyte
Load memory
● Plug-in (SIMATIC Memory Card), max.	32 Gbyte
Backup
● maintenance-free	Yes
CPU processing times
for bit operations, typ.	1 ns
for word operations, typ.	2 ns
for fixed point arithmetic, typ.	2 ns
for floating point arithmetic, typ.	6 ns
CPU-blocks
Number of elements (total)	20 000; Blocks (OB, FB, FC, DB) and UDTs
DB
● Number range	1 … 60 999; subdivided into: number range that can be used by the user: 1 … 59 999, and number range of DBs created via SFC 86: 60 000 … 60 999
● Size, max.	16 Mbyte; For DBs with absolute addressing, the max. size is 64 KB
FB
● Number range	0 … 65 535
● Size, max.	1 Mbyte
FC
● Number range	0 … 65 535
● Size, max.	1 Mbyte
OB
● Size, max.	1 Mbyte
● Number of free cycle OBs	100
● Number of time alarm OBs	20
● Number of delay alarm OBs	20
● Number of cyclic interrupt OBs	20; with minimum OB 3x cycle of 100 µs
● Number of process alarm OBs	50
● Number of DPV1 alarm OBs	3
● Number of isochronous mode OBs	3
● Number of technology synchronous alarm OBs	2
● Number of startup OBs	100
● Number of asynchronous error OBs	4
● Number of synchronous error OBs	2
● Number of diagnostic alarm OBs	1
Nesting depth
● per priority class	24
Counters, timers and their retentivity
S7 counter
● Number	2 048
Retentivity
— adjustable	Yes
IEC counter
● Number	Any (only limited by the main memory)
Retentivity
— adjustable	Yes
S7 times
● Number	2 048
Retentivity
— adjustable	Yes
IEC timer
● Number	Any (only limited by the main memory)
Retentivity
— adjustable	Yes
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.	768 kbyte; In total; available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 700 KB
Extended retentive data area (incl. timers, counters, flags), max.	20 Mbyte; When using PS 6 0W 24/48/60 V DC HF
Flag
● Size, max.	16 kbyte
● Number of clock memories	8; 8 clock memory bit, grouped into one clock memory byte
Data blocks
● Retentivity adjustable	Yes
● Retentivity preset	No
Local data
● per priority class, max.	64 kbyte; max. 16 KB per block
Address area
Number of IO modules	16 384; max. number of modules / submodules
I/O address area
● Inputs	32 kbyte; All inputs are in the process image
● Outputs	32 kbyte; All outputs are in the process image
per integrated IO subsystem
— Inputs (volume)	32 kbyte; max. 32 KB via X1; max. 8 KB via X2 or X4
— Outputs (volume)	32 kbyte; max. 32 KB via X1; max. 8 KB via X2 or X4
per CM/CP
— Inputs (volume)	8 kbyte
— Outputs (volume)	8 kbyte
Subprocess images
● Number of subprocess images, max.	32
Hardware configuration
Number of distributed IO systems	64; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link)
Number of DP masters
● integrated	1
● Via CM	8; A maximum of 8 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total
Number of IO Controllers
● integrated	2
● Via CM	8; A maximum of 8 CMs/CPs (PROFIBUS, PROFINET, Ethernet) can be inserted in total
Rack
● Modules per rack, max.	32; CPU + 31 modules
● Number of lines, max.	1
PtP CM
● Number of PtP CMs	the number of connectable PtP CMs is only limited by the number of available slots
Time of day
Clock
● Type	Hardware clock
● Backup time	6 wk; At 40 °C ambient temperature, typically
● Deviation per day, max.	10 s; Typ.: 2 s
Operating hours counter
● Number	16
Clock synchronization
● supported	Yes
● to DP, master	Yes
● in AS, master	Yes
● in AS, slave	Yes
● on Ethernet via NTP	Yes
Interfaces
Number of PROFINET interfaces	3
Number of PROFIBUS interfaces	1
1. Interface
Interface types
● RJ 45 (Ethernet)	Yes; X1
● Number of ports	2
● integrated switch	Yes
Protocols
● IP protocol	Yes; IPv4
● PROFINET IO Controller	Yes
● PROFINET IO Device	Yes
● SIMATIC communication	Yes
● Open IE communication	Yes; Optionally also encrypted
● Web server	Yes
● Media redundancy	Yes
PROFINET IO Controller
Services
— PG/OP communication	Yes
— Isochronous mode	Yes
— Direct data exchange	Yes; Requirement: IRT and isochronous mode (MRPD optional)
— IRT	Yes
— PROFIenergy	Yes; per user program
— Prioritized startup	Yes; Max. 32 PROFINET devices
— Number of connectable IO Devices, max.	512; In total, up to 1 000 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
— Of which IO devices with IRT, max.	64
— Number of connectable IO Devices for RT, max.	512
— of which in line, max.	512
— Number of IO Devices that can be simultaneously activated/deactivated, max.	8; in total across all interfaces
— Number of IO Devices per tool, max.	8
— Updating times	The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
Update time for IRT
— for send cycle of 125 µs	125 µs
— for send cycle of 187.5 µs	187.5 µs
— for send cycle of 250 µs	250 µs to 4 ms
— for send cycle of 500 µs	500 µs to 8 ms
— for send cycle of 1 ms	1 ms to 16 ms
— for send cycle of 2 ms	2 ms to 32 ms
— for send cycle of 4 ms	4 ms to 64 ms
— With IRT and parameterization of “odd” send cycles	Update time = set “odd” send clock (any multiple of 125 µs: 375 µs, 625 µs … 3 875 µs)
Update time for RT
— for send cycle of 250 µs	250 µs to 128 ms
— for send cycle of 500 µs	500 µs to 256 ms
— for send cycle of 1 ms	1 ms to 512 ms
— for send cycle of 2 ms	2 ms to 512 ms
— for send cycle of 4 ms	4 ms to 512 ms
PROFINET IO Device
Services
— PG/OP communication	Yes
— Isochronous mode	No
— IRT	Yes; Minimum send cycle of 250 µs
— PROFIenergy	Yes; per user program
— Shared device	Yes
— Number of IO Controllers with shared device, max.	4
— activation/deactivation of I-devices	Yes; per user program
— Asset management record	Yes; per user program
2. Interface
Interface types
● RJ 45 (Ethernet)	Yes; X2
● Number of ports	1
● integrated switch	No
Protocols
● IP protocol	Yes; IPv4
● PROFINET IO Controller	Yes
● PROFINET IO Device	Yes
● SIMATIC communication	Yes
● Open IE communication	Yes; Optionally also encrypted
● Web server	Yes
● Media redundancy	No
PROFINET IO Controller
Services
— PG/OP communication	Yes
— Isochronous mode	No
— Direct data exchange	No
— IRT	No
— PROFIenergy	Yes; per user program
— Prioritized startup	No
— Number of connectable IO Devices, max.	128; In total, up to 1 000 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
— Number of connectable IO Devices for RT, max.	128
— of which in line, max.	128
— Number of IO Devices that can be simultaneously activated/deactivated, max.	8; in total across all interfaces
— Number of IO Devices per tool, max.	8
— Updating times	The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data
Update time for RT
— for send cycle of 1 ms	1 ms to 512 ms
PROFINET IO Device
Services
— PG/OP communication	Yes
— Isochronous mode	No
— IRT	No
— PROFIenergy	Yes; per user program
— Prioritized startup	No
— Shared device	Yes
— Number of IO Controllers with shared device, max.	4
— activation/deactivation of I-devices	Yes; per user program
— Asset management record	Yes; per user program
3. Interface
Interface types
● RJ 45 (Ethernet)	Yes; X3
● Number of ports	1
● integrated switch	No
Protocols
● IP protocol	Yes; IPv4
● PROFINET IO Controller	No
● PROFINET IO Device	No
● SIMATIC communication	Yes
● Open IE communication	Yes
● Web server	Yes
4. Interface
Interface types
● RS 485	Yes
● Number of ports	1
Protocols
● PROFIBUS DP master	Yes
● PROFIBUS DP slave	No
● SIMATIC communication	Yes
PROFIBUS DP master
● Number of connections, max.	48; for the integrated PROFIBUS DP interface
● Number of DP slaves, max.	125; In total, up to 1 000 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET
Services
— PG/OP communication	Yes
— Equidistance	Yes
— Isochronous mode	Yes
— Activation/deactivation of DP slaves	Yes
Interface types
RJ 45 (Ethernet)
● 100 Mbps	Yes
● 1000 Mbps	Yes; Only possible at the X3 interface of the CPU 1518
● Autonegotiation	Yes
● Autocrossing	Yes
● Industrial Ethernet status LED	Yes
RS 485
● Transmission rate, max.	12 Mbit/s
Protocols
Number of connections
● Number of connections, max.	384; via integrated interfaces of the CPU and connected CPs / CMs
● Number of connections reserved for ES/HMI/web	10
● Number of connections via integrated interfaces	320
● Number of S7 routing paths	64; in total, only 16 S7-Routing connections are supported via PROFIBUS
Redundancy mode
● H-Sync forwarding	Yes
Media redundancy
— Media redundancy	only via 1st interface (X1)
— MRP	Yes; MRP Automanager according to IEC 62439-2 Edition 2.0, MRP Manager; MRP Client
— MRP interconnection, supported	Yes; as MRP ring node according to IEC 62439-2 Edition 3.0
— MRPD	Yes; Requirement: IRT
— Switchover time on line break, typ.	200 ms; For MRP, bumpless for MRPD
— Number of stations in the ring, max.	50
SIMATIC communication
● PG/OP communication	Yes; encryption with TLS V1.3 pre-selected
● S7 routing	Yes
● Data record routing	Yes
● S7 communication, as server	Yes
● S7 communication, as client	Yes
● User data per job, max.	See online help (S7 communication, user data size)
Open IE communication
● TCP/IP	Yes
— Data length, max.	64 kbyte
— several passive connections per port, supported	Yes
● ISO-on-TCP (RFC1006)	Yes
— Data length, max.	64 kbyte
● UDP	Yes
— Data length, max.	2 kbyte; 1 472 bytes for UDP broadcast
— UDP multicast	Yes; 128 multicast circuits (of which max. 5 via X1)
● DHCP	Yes
● DNS	Yes
● SNMP	Yes
● DCP	Yes
● LLDP	Yes
● Encryption	Yes; Optional
Web server
● HTTP	Yes; Standard and user pages
● HTTPS	Yes; Standard and user pages
OPC UA
● Runtime license required	Yes; “Large” license required
● OPC UA Client	Yes
— Application authentication	Yes
— Security policies	Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256
— User authentication	“anonymous” or by user name & password
— Number of connections, max.	40
— Number of nodes of the client interfaces, max.	5 000
— Number of elements for one call of OPC_UA_NodeGetHandleList/OPC_UA_ReadList/OPC_UA_WriteList, max.	300
— Number of elements for one call of OPC_UA_NameSpaceGetIndexList, max.	20
— Number of elements for one call of OPC_UA_MethodGetHandleList, max.	100
— Number of simultaneous calls of the client instructions per connection (except OPC_UA_ReadList,OPC_UA_WriteList,OPC_UA_MethodCall), max.	1
— Number of simultaneous calls of the client instructions OPC_UA_ReadList,OPC_UA_WriteList and OPC_UA_MethodCall, max.	5
— Number of registerable nodes, max.	5 000
— Number of registerable method calls of OPC_UA_MethodCall, max.	100
— Number of inputs/outputs when calling OPC_UA_MethodCall, max.	20
● OPC UA Server	Yes; Data access (read, write, subscribe), method call, custom address space
— Application authentication	Yes
— Security policies	Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256
— User authentication	“anonymous” or by user name & password
— GDS support (certificate management)	Yes
— Number of sessions, max.	64
— Number of accessible variables, max.	200 000
— Number of registerable nodes, max.	50 000
— Number of subscriptions per session, max.	20
— Sampling interval, min.	10 ms
— Publishing interval, min.	10 ms
— Number of server methods, max.	100
— Number of inputs/outputs per server method, max.	20
— Number of monitored items, max.	10 000; for 1 s sampling interval and 1 s send interval
— Number of nodes for user-defined server interfaces, max.	30 000
● Alarms and Conditions	Yes
— Number of program alarms	400
— Number of alarms for system diagnostics	200
Further protocols
● MODBUS	Yes; MODBUS TCP
Isochronous mode
Equidistance	Yes
S7 message functions
Number of login stations for message functions, max.	64
Program alarms	Yes
Number of configurable program messages, max.	10 000; Program messages are generated by the “Program_Alarm” block, ProDiag or GRAPH
Number of loadable program messages in RUN, max.	5 000
Number of simultaneously active program alarms
● Number of program alarms	4 000
● Number of alarms for system diagnostics	1 000
● Number of alarms for motion technology objects	480
Test commissioning functions
Joint commission (Team Engineering)	Yes; Parallel online access possible for up to 10 engineering systems
Status block	Yes; Up to 16 simultaneously (in total across all ES clients)
Single step	No
Number of breakpoints	20
Status/control
● Status/control variable	Yes
● Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
● Number of variables, max.
— of which status variables, max.	200; per job
— of which control variables, max.	200; per job
Forcing
● Forcing	Yes
● Forcing, variables	Peripheral inputs/outputs
● Number of variables, max.	200
Diagnostic buffer
● present	Yes
● Number of entries, max.	3 200
— of which powerfail-proof	1 000
Traces
● Number of configurable Traces	8; Up to 512 KB of data per trace are possible
Interrupts/diagnostics/status information
Diagnostics indication LED
● RUN/STOP LED	Yes
● ERROR LED	Yes
● MAINT LED	Yes
● Connection display LINK TX/RX	Yes
Supported technology objects
Motion Control	Yes; Note: The number of technology objects affects the cycle time of the PLC program; selection guide via the TIA Selection Tool
● Number of available Motion Control resources for technology objects	15 360
● Required Motion Control resources
— per speed-controlled axis	40
— per positioning axis	80
— per synchronous axis	160
— per external encoder	80
— per output cam	20
— per cam track	160
— per probe	40
● Positioning axis
— Number of positioning axes at motion control cycle of 4 ms (typical value)	140
— Number of positioning axes at motion control cycle of 8 ms (typical value)	192
Controller
● PID_Compact	Yes; Universal PID controller with integrated optimization
● PID_3Step	Yes; PID controller with integrated optimization for valves
● PID-Temp	Yes; PID controller with integrated optimization for temperature
Counting and measuring
● High-speed counter	Yes
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	0 °C
● horizontal installation, max.	60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off
● vertical installation, min.	0 °C
● vertical installation, max.	40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off
Ambient temperature during storage/transportation
● min.	-40 °C
● max.	70 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Configuration
Programming
Programming language	https://mesidas.com/ngon-ngu-lap-trinh-plc/
— LAD	Yes
— FBD	Yes
— STL	Yes
— SCL	Yes
— GRAPH	Yes
Know-how protection
● User program protection/password protection	Yes
● Copy protection	Yes
● Block protection	Yes
Access protection
● protection of confidential configuration data	Yes
● Password for display	Yes
● Protection level: Write protection	Yes
● Protection level: Read/write protection	Yes
● Protection level: Complete protection	Yes
Cycle time monitoring
● lower limit	adjustable minimum cycle time
● upper limit	adjustable maximum cycle time
Dimensions
Width	175 mm
Height	147 mm
Depth	129 mm
Weights
Weight, approx.	1 988 g

Nhà phân phối & báo giá 6ES7518-4AP00-0AB0

Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua bộ điều khiển 6ES7518-4AP00-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.