6EP3133-0TA10-0AY0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP3133-0TA10-0AY0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3133-0TA10-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6EP3133-0TA10-0AY0
SITOP PSU3400 24 V/4 A Stabilized power supply Input: DC 12 V (9…18 V) Output: DC 24 V/4 A
Mã sản phẩm | 6EP3133-0TA10-0AY0 |
Dòng sản phẩm | SITOP PSU3400 |
Hãng sản xuất | SIEMENS |
Nguồn đầu vào | DC 12 V (9…18 V) |
Nguồn đầu ra | DC 24 V/4 A |
Kích thước (RxCxS) | 32 x 100 x 100 mm |
Trọng lượng | 320 g |
Bảng chi tiết thông số kỹ thuật 6EP3133-0TA10-0AY0
Article number | 6EP3133-0TA10-0AY0 |
Product | SITOP PSU3400 |
Power supply, type | 24 V/4 A |
Input | |
Input | DC voltage |
● Note | |
supply voltage | |
● at DC | 12 … 12 V |
input voltage | |
● at DC | 9 … 18 V |
Wide-range input | No |
Overvoltage resistance | – |
Mains buffering | at Vin = 12 V |
Mains buffering at Iout rated, min. | 2 ms; at Vin = 12 V |
input current | |
● at rated input voltage 24 V | 9 A |
● at rated input voltage 48 V | |
Switch-on current limiting (+25 °C), max. | 15 A |
I²t, max. | 0.08 A²·s |
Built-in incoming fuse | 25 A (not accessible), breaking capacity 300 A |
Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: 16 A characteristic B or C |
Output | |
Output | Controlled, isolated DC voltage |
Rated voltage Vout DC | 24 V |
● output voltage at output 1 at DC rated value | 24 V |
Total tolerance, static ± | 2 % |
Static mains compensation, approx. | 0.1 % |
Static load balancing, approx. | 0.6 % |
Residual ripple peak-peak, max. | 150 mV |
Residual ripple peak-peak, typ. | 20 mV |
Spikes peak-peak, max. (bandwidth: 20 MHz) | 250 mV |
Spikes peak-peak, typ. (bandwidth: 20 MHz) | 40 mV |
Adjustment range | 24 … 28 V |
product function output voltage adjustable | Yes |
Output voltage setting | via potentiometer |
Status display | Green LED for 24 V OK |
On/off behavior | No overshoot of Vout (soft start) |
Startup delay, max. | 0.5 s |
Voltage rise, typ. | 10 ms |
voltage increase time of the output voltage maximum | 20 ms |
Rated current value Iout rated | 4 A |
Current range | 0 … 4 A |
● Note | +60 … +70 °C: Derating 2%/K |
supplied active power typical | 108 W |
Parallel switching for enhanced performance | Yes |
Numbers of parallel switchable units for enhanced performance | 2 |
Efficiency | |
Efficiency at Vout rated, Iout rated, approx. | 89 % |
Power loss at Vout rated, Iout rated, approx. | 12 W |
power loss [W] during no-load operation maximum | 1.5 W |
Closed-loop control | |
Dynamic mains compensation (Vin rated ±15 %), max. | 0.3 % |
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. | 2 % |
Load step setting time 50 to 100%, typ. | 1 ms |
Load step setting time 100 to 50%, typ. | 1 ms |
Protection and monitoring | |
Output overvoltage protection | Ua < 35 V |
Current limitation, typ. | 4.5 A |
property of the output short-circuit proof | Yes |
Short-circuit protection | Electronic shutdown, automatic restart |
Overload/short-circuit indicator | Yellow LED overload |
Safety | |
Primary/secondary isolation | Yes |
galvanic isolation | Safety extra low output voltage Vout according to EN 60950-1 |
Protection class | Class III |
Degree of protection (EN 60529) | IP20 |
Approvals | |
CE mark | Yes |
UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
Explosion protection | – |
certificate of suitability NEC Class 2 | No |
FM approval | – |
CB approval | Yes |
certificate of suitability EAC approval | Yes |
Regulatory Compliance Mark (RCM) | Yes |
Marine approval | ABS, DNV GL |
EMC | |
Emitted interference | EN 61000-6-3 |
Supply harmonics limitation | not applicable |
Noise immunity | EN 61000-6-2 |
environmental conditions | |
ambient temperature | |
● during operation | -25 … +70 °C |
— Note | with natural convection |
● during transport | -40 … +85 °C |
● during storage | -40 … +85 °C |
Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
Mechanics | |
Connection technology | screw-type terminals |
Connections | |
● Supply input | L, N, FE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded |
● Output | +, -: 2 screw terminals each for 0.5 … 2.5 mm² |
width of the enclosure | 32 mm |
height of the enclosure | 100 mm |
depth of the enclosure | 100 mm |
required spacing | |
● top | 50 mm |
● bottom | 50 mm |
● left | 0 mm |
● right | 0 mm |
Weight, approx. | 0.32 kg |
product feature of the enclosure housing can be lined up | Yes |
Installation | Snaps onto DIN rail EN 60715 35×7.5/15 |
electrical accessories | Buffer module |
MTBF at 40 °C | 1 868 914 h |
other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối & báo giá 6EP3133-0TA10-0AY0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3133-0TA10-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.