6ES7412-2XK07-0AB0 CPU 412-2 PLC SIMATIC S7-400 SIEMENS

Name: 6ES7412-2XK07-0AB0 CPU 412-2 PLC SIMATIC S7-400 SIEMENS
SKU: 6ES7412-2XK07-0AB0

Liên hệ

SIMATIC S7-400, CPU 412-2 Central processing unit with: Work memory 1 MB, (0.5 MB code; 0.5 MB data) 1st interface MPI/DP 12 Mbit/s, 2nd interface PROFIBUS DP.

Tải về datasheet (pdf): Tại đây!

6ES7412-2XK07-0AB0 là bộ điều khiển logic khả trình (PLC) dòng cao cấp do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc dòng PLC S7-400. 6ES7412-2XK07-0AB0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7412-2XK07-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

6ES7412-2XK07-0AB0

Mục lục

Bảng tóm tắt thông số kỹ thuật 6ES7412-2XK07-0AB0

SIMATIC S7-400, CPU 412-2 Central processing unit with: Work memory 1 MB, (0.5 MB code; 0.5 MB data) 1st interface MPI/DP 12 Mbit/s, 2nd interface PROFIBUS DP,

Mã sản phẩm	6ES7412-2XK07-0AB0
Dòng sản phẩm	SIMATIC S7-400, CPU 412-2
Hãng sản xuất	SIEMENS
Interface	MPI/DP, PROFIBUS DP
Dung lượng bộ nhớ	1 MB (0.5 MB code, 0.5 MB dữ liệu)
Nguồn cung cấp	Cấp nguồn qua bộ cung cấp nguồn (PS)
Kích thước (RxCxS)	25x290x219 mm
Trọng lượng	700 g

Bảng chi tiết thông số kỹ thuật 6ES7412-2XK07-0AB0

Article number	6ES7412-2XK07-0AB0
	CPU412-2, MPI/DP, 1 MB
General information
Product type designation	CPU 412-2
HW functional status	01
Firmware version	V7.0
Product function
● Isochronous mode	Yes; For PROFIBUS only
Engineering with
● Programming package	STEP 7 V5.4 or higher with HSP 261
CiR – Configuration in RUN
CiR synchronization time, basic load	100 ms
CiR synchronization time, time per I/O byte	30 µs
Supply voltage
Rated value (DC)
● 24 V DC	No; Power supply via system power supply
Input current
from backplane bus 5 V DC, typ.	0.9 A
from backplane bus 5 V DC, max.	1.1 A
from backplane bus 24 V DC, max.	300 mA; 150 mA per DP interface
from interface 5 V DC, max.	90 mA; At each DP interface
Power loss
Power loss, typ.	4.5 W
Power loss, max.	5.5 W
Memory
Type of memory	RAM
Work memory
● integrated	1 Mbyte
● integrated (for program)	512 kbyte
● integrated (for data)	512 kbyte
● expandable	No
Load memory
● expandable FEPROM	Yes; with Memory Card (FLASH)
● expandable FEPROM, max.	64 Mbyte
● integrated RAM, max.	512 kbyte
● expandable RAM	Yes; with Memory Card (RAM)
● expandable RAM, max.	64 Mbyte
Backup
● present	Yes
● with battery	Yes; all data
● without battery	No
Battery
Backup battery
● Backup current, typ.	180 µA; up to 40 °C
● Backup current, max.	850 µA
● Backup time, max.	Dealt with in the module data manual with the secondary conditions and the factors of influence
● Feeding of external backup voltage to CPU	5 V DC to 15 V DC
CPU processing times
for bit operations, typ.	31.25 ns
for word operations, typ.	31.25 ns
for fixed point arithmetic, typ.	31.25 ns
for floating point arithmetic, typ.	62.5 ns
CPU-blocks
DB
● Number, max.	3 000; Number range: 1 to 16000
● Size, max.	64 kbyte
FB
● Number, max.	1 500; Number range: 0 to 7999
● Size, max.	64 kbyte
FC
● Number, max.	1 500; Number range: 0 to 7999
● Size, max.	64 kbyte
OB
● Number, max.	see instruction list
● Size, max.	64 kbyte
● Number of free cycle OBs	1; OB 1
● Number of time alarm OBs	2; OB 10, 11
● Number of delay alarm OBs	2; OB 20, 21
● Number of cyclic interrupt OBs	2; OB 32, 35 (shortest cycle that can be set = 500 µs)
● Number of process alarm OBs	2; OB 40, 41
● Number of DPV1 alarm OBs	3; OB 55-57
● Number of isochronous mode OBs	2; OB 61-62
● Number of multicomputing OBs	1; OB 60
● Number of background OBs	1; OB 90
● Number of startup OBs	3; OB 100-102
● Number of asynchronous error OBs	9; OB 80-88
● Number of synchronous error OBs	2; OB 121, 122
Nesting depth
● per priority class	24
● additional within an error OB	1
Counters, timers and their retentivity
S7 counter
● Number	2 048
Retentivity
— adjustable	Yes
— lower limit	0
— upper limit	2 047
— preset	Z 0 to Z 7
Counting range
— lower limit	0
— upper limit	999
IEC counter
● present	Yes
● Type	SFB
● Number	Unlimited (limited only by RAM capacity)
S7 times
● Number	2 048
Retentivity
— adjustable	Yes
— lower limit	0
— upper limit	2 047
— preset	No times retentive
Time range
— lower limit	10 ms
— upper limit	9 990 s
IEC timer
● present	Yes
● Type	SFB
● Number	Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total	Total working and load memory (with backup battery)
Flag
● Number, max.	4 kbyte; Size of bit memory address area
● Retentivity available	Yes
● Retentivity preset	MB 0 to MB 15
● Number of clock memories	8; in 1 memory byte
Local data
● adjustable, max.	8 kbyte
● preset	4 kbyte
Address area
I/O address area
● Inputs	4 kbyte
● Outputs	4 kbyte
Process image
● Inputs, adjustable	4 kbyte
● Outputs, adjustable	4 kbyte
● Inputs, default	128 byte
● Outputs, default	128 byte
● consistent data, max.	244 byte
● Access to consistent data in process image	Yes
Subprocess images
● Number of subprocess images, max.	15
Digital channels
● Inputs	32 768
— of which central	32 768
● Outputs	32 768
— of which central	32 768
Analog channels
● Inputs	2 048
— of which central	2 048
● Outputs	2 048
— of which central	2 048
Hardware configuration
Number of expansion units, max.	21
connectable OPs	47
Multicomputing	Yes; 4 CPUs max. (with UR1 or UR2)
Interface modules
● Number of connectable IMs (total), max.	6
● Number of connectable IM 460s, max.	6
● Number of connectable IM 463s, max.	4; IM 463-2
Number of DP masters
● integrated	2
● via CP	10; CP 443-5 Extended
● via IM 467	4
● Mixed mode IM + CP permitted	No; IM 467 cannot be used jointly with CP 443-5 Ext. or CP 443-1 in PROFINET IO mode
● via interface module	0
● Number of pluggable S5 modules (via adapter capsule in central device), max.	6
Number of IO Controllers
● integrated	0
● via CP	4; Max. 4 in the central controller; no mixed operation of different CP 443-1 types in PROFINET IO mode
Number of operable FMs and CPs (recommended)
● FM	Limited by number of slots and number of connections
● CP, PtP	CP 440: Limited by number of slots; CP 441: Limited by number of slots and number of connections
● PROFIBUS and Ethernet CPs	14; In total max. 10 CPs as DP master and PROFINET controller, of which up to 10 IMs or CPs as DP master and up to 4 CPs as PROFINET controller
Slots
● required slots	1
Time of day
Clock
● Hardware clock (real-time)	Yes
● retentive and synchronizable	Yes
● Resolution	1 ms
● Deviation per day (buffered), max.	1.7 s; Power off
● Deviation per day (unbuffered), max.	8.6 s; For power On
Operating hours counter
● Number	16
● Number/Number range	0 to 15
● Range of values	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 – 1 hours
● Granularity	1 h
● retentive	Yes
Clock synchronization
● supported	Yes
● to MPI, master	Yes
● to MPI, slave	Yes
● to DP, master	Yes
● to DP, slave	Yes
● in AS, master	Yes
● in AS, slave	Yes
● on Ethernet via NTP	No; Via CP
● to IF 964 DP	No
Time difference in system when synchronizing via
● Ethernet, max.
● MPI, max.	200 ms
Interfaces
Interfaces/bus type	1 x MPI/PROFIBUS DP, 1 x PROFIBUS DP
Number of RS 485 interfaces	2; Combined MPI / PROFIBUS DP and PROFIBUS DP
1. Interface
Interface type	Integrated
Physics	RS 485 / PROFIBUS + MPI
Isolated	Yes
Power supply to interface (15 to 30 V DC), max.	150 mA
Protocols
● MPI	Yes
● PROFIBUS DP master	Yes
● PROFIBUS DP slave	Yes
MPI
● Number of connections	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
● Transmission rate, max.	12 Mbit/s
Services
— PG/OP communication	Yes
— Routing	Yes
— Global data communication	Yes
— S7 basic communication	Yes
— S7 communication	Yes
— S7 communication, as client	Yes
— S7 communication, as server	Yes
PROFIBUS DP master
● Number of connections, max.	16; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
● Transmission rate, max.	12 Mbit/s
● Number of DP slaves, max.	32
Services
— PG/OP communication	Yes
— Routing	Yes; S7 routing
— Global data communication	No
— S7 basic communication	Yes
— S7 communication	Yes
— S7 communication, as client	Yes
— S7 communication, as server	Yes
— Equidistance	Yes
— Isochronous mode	Yes
— SYNC/FREEZE	Yes
— Activation/deactivation of DP slaves	Yes
— Direct data exchange (slave-to-slave communication)	Yes
— DPV1	Yes
Address area
— Inputs, max.	2 kbyte
— Outputs, max.	2 kbyte
User data per DP slave
— User data per DP slave, max.	244 byte
— Inputs, max.	244 byte
— Outputs, max.	244 byte
— Slots, max.	244
— per slot, max.	128 byte
PROFIBUS DP slave
● Number of connections	16
● GSD file	http://support.automation.siemens.com/WW/view/en/113652
● Transmission rate, max.	12 Mbit/s
● automatic baud rate search	No
● Address area, max.	32; Virtual slots
● User data per address area, max.	32 byte
— of which consistent, max.	32 byte
Services
— PG/OP communication	Yes; with interface active
— Routing	Yes; with interface active
— Global data communication	No
— S7 basic communication	No
— S7 communication	Yes
— S7 communication, as client	Yes
— S7 communication, as server	Yes
— Direct data exchange (slave-to-slave communication)	No
— DPV1	No
Transfer memory
— Inputs	244 byte
— Outputs	244 byte
2. Interface
Interface type	Integrated
Physics	RS 485 / PROFIBUS
Isolated	Yes
Power supply to interface (15 to 30 V DC), max.	150 mA
automatic detection of transmission rate
Autonegotiation
Autocrossing
Change of IP address at runtime, supported
Number of connection resources	16
Interface types
● Number of ports
● integrated switch
Protocols
● PROFINET IO Controller
● PROFINET IO Device
● PROFINET CBA
● PROFIBUS DP master	Yes
● PROFIBUS DP slave	Yes
● Open IE communication
● Web server
● Point-to-point connection
● Media redundancy
PROFIBUS DP master
● Number of connections, max.	16
● Transmission rate, max.	12 Mbit/s
● Number of DP slaves, max.	64
Services
— PG/OP communication	Yes
— Routing	Yes; S7 routing
— Global data communication	No
— S7 basic communication	Yes
— S7 communication	Yes
— S7 communication, as client	Yes
— S7 communication, as server	Yes
— Equidistance	Yes
— Isochronous mode	Yes
— SYNC/FREEZE	Yes
— Activation/deactivation of DP slaves	Yes
— Direct data exchange (slave-to-slave communication)	Yes
— DPV1	Yes
Address area
— Inputs, max.	4 kbyte
— Outputs, max.	4 kbyte
User data per DP slave
— User data per DP slave, max.	244 byte
— Inputs, max.	244 byte
— Outputs, max.	244 byte
— Slots, max.	244
— per slot, max.	128 byte
PROFIBUS DP slave
● Number of connections	16
● GSD file	http://support.automation.siemens.com/WW/view/en/113652
● Transmission rate, max.	12 Mbit/s
● Address area, max.	32
● User data per address area, max.	32 byte
— of which consistent, max.	32 byte
Services
— Routing	Yes; with interface active
Transfer memory
— Inputs	244 byte
— Outputs	244 byte
PROFINET IO Controller
● Transmission rate, max.
Services
— PG/OP communication
— S7 routing
— S7 communication
— Isochronous mode
— Shared device
— Prioritized startup
— Number of IO devices with prioritized startup, max.
— Number of connectable IO Devices, max.
— Of which IO devices with IRT, max.
— of which in line, max.
— Number of IO Devices with IRT and the option “high flexibility”
— of which in line, max.
— Number of connectable IO Devices for RT, max.
— of which in line, max.
— Activation/deactivation of IO Devices
— Number of IO Devices that can be simultaneously activated/deactivated, max.
— IO Devices changing during operation (partner ports), supported
— Number of IO Devices per tool, max.
— Device replacement without swap medium
— Send cycles
— Updating time
Address area
— Inputs, max.
— Outputs, max.
— User data consistency, max.
PROFINET IO Device
Services
— PG/OP communication
— S7 routing
— S7 communication
— Isochronous mode
— IRT
— Prioritized startup
— Shared device
— Number of IO Controllers with shared device, max.
Transfer memory
— Inputs, max.
— Outputs, max.
Submodules
— Number, max.
— User data per submodule, max.
PROFINET CBA
● acyclic transmission
● cyclic transmission
Open IE communication
● Number of connections, max.
● Local port numbers used at the system end
● Keep-alive function, supported
Protocols
Redundancy mode
Media redundancy
— Switchover time on line break, typ.
— Number of stations in the ring, max.
Open IE communication
● TCP/IP
— Number of connections, max.
— Data length, max.
— several passive connections per port, supported
● ISO-on-TCP (RFC1006)	Via CP 443-1 and loadable FB
— Number of connections, max.
— Data length, max.	1 452 bytes via CP 443-1 Adv.
● UDP
— Number of connections, max.
— Data length, max.
Web server
● supported	No
● User-defined websites
● Number of HTTP clients
Isochronous mode
Equidistance	Yes
Number of DP masters with isochronous mode	2
User data per isochronous slave, max.	244 byte
shortest clock pulse	1.5 ms; 0.5 ms without use of SFC 126, 127
max. cycle	32 ms
Communication functions
PG/OP communication	Yes
● Number of connectable OPs without message processing	47
● Number of connectable OPs with message processing	47; When using Alarm_S/SQ and Alarm_D/DQ
Data record routing	Yes
Global data communication
● supported	Yes
● Number of GD loops, max.	8
● Number of GD packets, transmitter, max.	8
● Number of GD packets, receiver, max.	16
● Size of GD packets, max.	54 byte
● Size of GD packet (of which consistent), max.	1 variable
S7 basic communication
● supported	Yes
● User data per job, max.	76 byte
● User data per job (of which consistent), max.	1 variable
S7 communication
● supported	Yes
● as server	Yes
● as client	Yes
● User data per job, max.	64 kbyte
● User data per job (of which consistent), max.	462 byte; 1 variable
S5 compatible communication
● supported	Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5
● User data per job, max.	8 kbyte
● User data per job (of which consistent), max.	240 byte
● Number of simultaneous AG-SEND/AG-RECV orders per CPU, max.	24/24
Standard communication (FMS)
● supported	Yes; Via CP and loadable FB
PROFINET CBA (at set setpoint communication load)
● Setpoint for the CPU communication load
● Number of remote interconnection partners
● Number of functions, master/slave
● Total of all master/slave connections
● Data length of all incoming connections master/slave, max.
● Data length of all outgoing connections master/slave, max.
● Number of device-internal and PROFIBUS interconnections
● Data length of device-internal und PROFIBUS interconnections, max.
● Data length per connection, max.
Remote interconnections with acyclic transmission
— Sampling interval, min.
— Number of incoming interconnections
— Number of outgoing interconnections
— Data length of all incoming interconnections, max.
— Data length of all outgoing interconnections, max.
— Data length per connection, max.
Remote interconnections with cyclic transmission
— Transmission frequency: Transmission interval, min.
— Number of incoming interconnections
— Number of outgoing interconnections
— Data length of all incoming interconnections, max.
— Data length of all outgoing interconnections, max.
— Data length per connection, max.
HMI variables via PROFINET (acyclic)
— Number of stations that can log on for HMI variables (PN OPC/iMap)
— HMI variable updating
— Number of HMI variables
— Data length of all HMI variables, max.
PROFIBUS proxy functionality
— supported
— Data length per connection, max.
Number of connections
● overall	48
● usable for PG communication	47
— reserved for PG communication	1
— adjustable for PG communication, max.	0
● usable for OP communication	47
— reserved for OP communication	1
— adjustable for OP communication, max.	0
● usable for S7 basic communication	46
— reserved for S7 basic communication	0
— adjustable for S7 basic communication, max.	0
● usable for S7 communication	46
— reserved for S7 communication	0
— adjustable for S7 communication, max.	0
● usable for routing	23
— reserved for routing	0
— adjustable for routing, max.	0
S7 message functions
Number of login stations for message functions, max.	47; Max. 47 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 8 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC)
Symbol-related messages	Yes
SCAN procedure	Yes
Program alarms	Yes
Process diagnostic messages	Yes
simultaneously active Alarm-S blocks, max.	250; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks
Alarm 8-blocks	Yes
● Number of instances for alarm 8 and S7 communication blocks, max.	300
● preset, max.	150
Process control messages	Yes
Number of archives that can log on simultaneously (SFB 37 AR_SEND)	4
Number of messages
● overall, max.	256
● in 100 ms grid, max.	0
● in 500 ms grid, max.	256
● in 1000 ms grid, max.	256
Number of additional values
● with 100 ms grid, max.	0
● with 500, 1000 ms grid, max.	1
Test commissioning functions
Status block	Yes; Up to 16 simultaneously
Single step	Yes
Number of breakpoints	16
Status/control
● Status/control variable	Yes; Up to 16 variable tables
● Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
● Number of variables, max.	70; Status/control
Forcing
● Forcing	Yes
● Forcing, variables	Inputs, outputs, bit memories, peripheral inputs, peripheral outputs
● Number of variables, max.	64
Diagnostic buffer
● present	Yes
● Number of entries, max.	3 200
— adjustable	Yes
— preset	120
Service data
● can be read out	Yes
Standards, approvals, certificates
CE mark	Yes
CSA approval	Yes
UL approval	Yes
cULus	Yes
FM approval	Yes
RCM (formerly C-TICK)	Yes
KC approval	Yes
EAC (formerly Gost-R)	Yes
Use in hazardous areas
● ATEX	ATEX II 3G Ex nA IIC T4 Gc
Ambient conditions
Ambient temperature during operation
● min.	0 °C
● max.	60 °C
Configuration
Configuration software
● STEP 7	Yes
Programming
● Command set	see instruction list
● Nesting levels	7
● Access to consistent data in process image	Yes
● System functions (SFC)	see instruction list
● System function blocks (SFB)	see instruction list
Programming language
— LAD	Yes
— FBD	Yes
— STL	Yes
— SCL	Yes
— CFC	Yes
— GRAPH	Yes
— HiGraph®	Yes
Number of simultaneously active SFCs
— DPSYC_FR	2; SFC 11; per interface
— D_ACT_DP	8; SFC 12; per interface
— RD_REC	8; SFC 59; per interface
— WR_REC	8; SFC 58; per interface
— WR_PARM	8; SFC 55; per interface
— PARM_MOD	1; SFC 57; per interface
— WR_DPARM	2; SFC 56; per interface
— DPNRM_DG	8; SFC 13; per interface
— RDSYSST	8; SFC 51
— DP_TOPOL	1; SFC 103; per interface
Number of simultaneously active SFBs
— RDREC	8; SFB 52; per interface, but not more than 32 across all external interfaces
— WRREC	8; SFB 53; per interface, but not more than 32 across all external interfaces
Know-how protection
● User program protection/password protection	Yes
● Block encryption	Yes; With S7 block Privacy
Dimensions
Width	25 mm
Height	290 mm
Depth	219 mm
Weights
Weight, approx.	700 g

Phân phối & báo giá 6ES7412-2XK07-0AB0

Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua bộ điều khiển 6ES7412-2XK07-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.