6ES7148-4PC00-0HA0 PS 24VDC/8A (3 400-480VAC) SIMATIC ET 200Pro

Liên hệ

SIMATIC ET200pro PS Regulated power supply in protection type IP67 input: 3 AC 400-480 V output: 24 V/8 A DC.

Tải về datasheet (pdf): Tại đây!

6ES7148-4PC00-0HA0 là bộ cung cấp nguồn cho SIMATIC ET200pro được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7148-4PC00-0HA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7148-4PC00-0HA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bảng tóm tắt thông số kỹ thuật 6ES7148-4PC00-0HA0

SIMATIC ET200pro PS Regulated power supply in protection type IP67 input: 3 AC 400-480 V output: 24 V/8 A DC

Mã sản phẩm 6ES7148-4PC00-0HA0
Dòng sản phẩm SIMATIC ET200pro PS IP67
Hãng sản xuất SIEMENS
Nguồn đầu ra 24 V/8 A DC
Nguồn đầu vào 3 AC 400-480 V (340-550 V AC)
Kích thước (RxCxS) 310 x 135 x 90 mm
Trọng lượng 2 800 g

Bảng chi tiết thông số kỹ thuật 6ES7148-4PC00-0HA0

Article number 6ES7148-4PC00-0HA0
Product SIMATIC ET200pro PS
Power supply, type 24 V/8 A
Input
Input 3-phase AC
Rated voltage value Vin rated 400 … 480 V
Voltage range AC 340 … 550 V
● Note 320 … 340 V for max. 1 min
Wide-range input Yes
Overvoltage resistance Implemented internally with varistors
Mains buffering at Vin = 400 V
Mains buffering at Iout rated, min. 15 ms; at Vin = 400 V
Rated line frequency 1 50 Hz
Rated line frequency 2 60 Hz
Rated line range 45 … 66 Hz
input current
● at rated input voltage 400 V 0.5 A
Switch-on current limiting (+25 °C), max. 40 A
I²t, max. 3.5 A²·s
Built-in incoming fuse T 4 A
Protection in the mains power input (IEC 898) Required: Circuit breaker 3RV2011-1DA10 or 3RV2711-1DD10 (UL 489)
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
● output voltage at output 1 at DC rated value 24 V
Total tolerance, static ± 3 %
Static mains compensation, approx. 0.5 %
Static load balancing, approx. 0.5 %
Residual ripple peak-peak, max. 200 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 250 mV
product function output voltage adjustable No
Output voltage setting
Status display Green LED for 24 V OK
Signaling max. 30 V, 10 mA; Power-Good (High-Pegel 1L+ for Vout in range 21.3 … 29 V); Overtemperature warning at least 30 s before switch-off (high level 1L+ when the max. internal temperature is exceeded)
On/off behavior Overshoot of Vout < 2 %
Startup delay, max. 1.5 s
Voltage rise, typ. 40 ms
Rated current value Iout rated 8 A
Current range 0 … 8 A
supplied active power typical 192 W
short-term overload current
● on short-circuiting during the start-up typical 50 A
● at short-circuit during operation typical 50 A
duration of overloading capability for excess current
● on short-circuiting during the start-up 100 ms
● at short-circuit during operation 100 ms
Parallel switching for enhanced performance No
Efficiency
Efficiency at Vout rated, Iout rated, approx. 88 %
Power loss at Vout rated, Iout rated, approx. 25 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max. 0.5 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 1 %
setting time maximum 2 ms
Protection and monitoring
Output overvoltage protection < 33 V
Current limitation, typ. 9.4 A
property of the output short-circuit proof Yes
Short-circuit protection Electronic shutdown, automatic restart
enduring short circuit current RMS value
● maximum 10 A
Overload/short-circuit indicator
Safety
Primary/secondary isolation Yes
galvanic isolation Protective extra low output voltage Vout according to EN 60950-1 and EN 50178
Protection class Class I
leakage current
● maximum 3.5 mA
● typical 0.4 mA
Degree of protection (EN 60529) IP67, enclosure type 5 indoor
Approvals
CE mark Yes
UL/cUL (CSA) approval UL-Listed (UL 508) according to NFPA compatibility (National Fire Protection Association), see operating instructions
Explosion protection
certificate of suitability NEC Class 2 No
FM approval
CB approval Yes
certificate of suitability EAC approval Yes
Marine approval
EMC
Emitted interference EN 55022 Class A
Supply harmonics limitation
Noise immunity EN 61000-6-2
environmental conditions
ambient temperature
● during operation -25 … +55 °C
— Note with natural convection
● during transport -40 … +70 °C
● during storage -40 … +70 °C
Humidity class according to EN 60721 Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology screw-type terminals
Connections
● Supply input L1, L2, L3, PE: Plug connector HAN Q4/2 (counterpart see “Electrical accessories”)
● Output L+, M: 2 x 1.5 mm² each (4-pole cable for +/- with open, labeled ends, 4 x 1.5 mm²)
● Auxiliary Alarm signals: M12 plug-in connector 5-pin
width of the enclosure 310 mm
height of the enclosure 135 mm
depth of the enclosure 90 mm
Weight, approx. 2.8 kg
product feature of the enclosure housing can be lined up No
Installation Can be mounted onto ET200pro mounting rail
electrical accessories Power connector (Input: 3RK1911-2BE30 (6 mm²)) (Output: 3RK1911-2BF10 (4 mm²))
MTBF at 40 °C 196 354 h
other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6ES7148-4PC00-0HA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7148-4PC00-0HA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

5/5 - (1 bình chọn)
Nhận thông báo qua Email
Nhận thông báo cho
guest

Mới nhất
Cũ nhất
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x