6ES7144-4GF01-0AB0 EM 4AI-I HF SIMATIC DP ET 200Pro
Liên hệ
SIMATIC DP, Electronic module for ET 200 PRO 4 AI I High Feature, +-20 mA; 0…20 mA; 4-20mA; Channel diagnostics; incl. bus module, Connection module IO 6ES7194-4..00-0AA0 order separately.
Tải về datasheet (pdf): Tại đây!
6ES7144-4GF01-0AB0 là module mở rộng đầu vào tương tự (analog input module) được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7144-4GF01-0AB0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7144-4GF01-0AB0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7144-4GF01-0AB0
SIMATIC DP, Electronic module for ET 200 PRO 4 AI I High Feature, +-20 mA; 0…20 mA; 4-20mA; Channel diagnostics; incl. bus module, Connection module IO 6ES7194-4..00-0AA0 order separately
| Mã sản phẩm | 6ES7144-4GF01-0AB0 |
| Dòng sản phẩm | SIMATIC DP, ET 200pro, EM 4AI-I HF |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu vào tương tự | 4 AI I High Feature, +-20 mA; 0…20 mA; 4-20mA |
| Nguồn cung cấp | 24 V DC |
| Kích thước (RxCxS) | 45 x 130 x 35 mm |
| Trọng lượng | 150 g |
Bảng chi tiết thông số kỹ thuật 6ES7144-4GF01-0AB0
| Article number | 6ES7144-4GF01-0AB0 |
| ET 200pro, EM 4AI-I HF | |
| Supply voltage | |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes; against destruction |
| Input current | |
| from supply voltage 1L+, max. | 40 mA; Typical |
| from backplane bus 3.3 V DC, max. | 12 mA; Typical |
| Encoder supply | |
| Number of outputs | 4 |
| Short-circuit protection | Yes; per module, electronic to frame |
| Output current | |
| ● up to 55 °C, max. | 1 A |
| Power loss | |
| Power loss, typ. | 1.1 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 8 byte |
| Analog inputs | |
| Number of analog inputs | 4 |
| permissible input voltage for voltage input (destruction limit), max. | |
| permissible input current for current input (destruction limit), max. | 40 mA |
| Constant measurement current for resistance-type transmitter, typ. | |
| Cycle time (all channels) max. | 10 ms |
| Technical unit for temperature measurement adjustable | |
| Input ranges (rated values), voltages | |
| ● 0 to +10 V | |
| ● 1 V to 5 V | |
| ● -10 V to +10 V | |
| ● -5 V to +5 V | |
| ● -80 mV to +80 mV | |
| — Input resistance (-80 mV to +80 mV) | |
| Input ranges (rated values), currents | |
| ● 0 to 20 mA | Yes |
| — Input resistance (0 to 20 mA) | 50 Ω |
| ● -20 mA to +20 mA | Yes |
| — Input resistance (-20 mA to +20 mA) | 50 Ω |
| ● 4 mA to 20 mA | Yes |
| — Input resistance (4 mA to 20 mA) | 50 Ω |
| Input ranges (rated values), thermocouples | |
| ● Type B | |
| — Input resistance (Type B) | |
| ● Type E | |
| — Input resistance (Type E) | |
| ● Type J | |
| — Input resistance (type J) | |
| ● Type K | |
| — Input resistance (Type K) | |
| ● Type L | |
| — Input resistance (Type L) | |
| ● Type N | |
| — Input resistance (Type N) | |
| ● Type R | |
| — Input resistance (Type R) | |
| ● Type S | |
| — Input resistance (Type S) | |
| ● Type T | |
| — Input resistance (Type T) | |
| Input ranges (rated values), resistance thermometer | |
| ● Cu 10 | |
| ● Ni 100 | |
| — Input resistance (Ni 100) | |
| ● Ni 1000 | |
| — Input resistance (Ni 1000) | |
| ● Ni 120 | |
| — Input resistance (Ni 120) | |
| ● Ni 200 | |
| — Input resistance (Ni 200) | |
| ● Ni 500 | |
| — Input resistance (Ni 500) | |
| ● Pt 100 | |
| — Input resistance (Pt 100) | |
| ● Pt 1000 | |
| — Input resistance (Pt 1000) | |
| ● Pt 200 | |
| — Input resistance (Pt 200) | |
| ● Pt 500 | |
| — Input resistance (Pt 500) | |
| Input ranges (rated values), resistors | |
| ● 0 to 150 ohms | |
| — Input resistance (0 to 150 ohms) | |
| ● 0 to 300 ohms | |
| — Input resistance (0 to 300 ohms) | |
| ● 0 to 600 ohms | |
| — Input resistance (0 to 600 ohms) | |
| ● 0 to 3000 ohms | |
| — Input resistance (0 to 3000 ohms) | |
| Thermocouple (TC) | |
| Temperature compensation | |
| — internal temperature compensation | |
| — external temperature compensation with compensations socket | |
| Characteristic linearization | |
| ● parameterizable | |
| — for resistance thermometer | |
| Cable length | |
| ● shielded, max. | 30 m |
| Analog value generation for the inputs | |
| Measurement principle | integrating |
| Integration and conversion time/resolution per channel | |
| ● Resolution with overrange (bit including sign), max. | 15 bit; 15 bit + sign at ±10 V, at ±5 V; 15 bit at 0 V to 10 V, at 1 V to 5 V |
| ● Integration time (ms) | 0,3 / 16,7 / 20 / 60 |
| ● Interference voltage suppression for interference frequency f1 in Hz | 16,67 / 50 / 60 / 3 600 |
| ● Conversion time (per channel) | 1.1 ms |
| Smoothing of measured values | |
| ● parameterizable | Yes |
| ● Step: None | Yes; 1x cycle time |
| ● Step: low | Yes; 4x cycle time |
| ● Step: Medium | Yes; 16x cycle time |
| ● Step: High | Yes; 64x cycle time |
| Encoder | |
| Connection of signal encoders | |
| ● for voltage measurement | |
| ● for current measurement as 2-wire transducer | Yes |
| ● for current measurement as 4-wire transducer | Yes |
| ● for resistance measurement with two-wire connection | |
| ● for resistance measurement with three-wire connection | |
| ● for resistance measurement with four-wire connection | |
| Errors/accuracies | |
| Linearity error (relative to input range), (+/-) | 0.0075 % |
| Temperature error (relative to input range), (+/-) | 0.00075 %/K |
| Crosstalk between the inputs, min. | -70 dB |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.004 % |
| Operational error limit in overall temperature range | |
| ● Voltage, relative to input range, (+/-) | |
| ● Current, relative to input range, (+/-) | 0.1 % |
| ● Resistance thermometer, relative to input range, (+/-) | |
| Basic error limit (operational limit at 25 °C) | |
| ● Voltage, relative to input range, (+/-) | |
| ● Current, relative to input range, (+/-) | 0.075 % |
| ● Resistance thermometer, relative to input range, (+/-) | |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | |
| ● Series mode interference (peak value of interference < rated value of input range), min. | |
| ● Common mode interference (USS < 2.5 V), min. | |
| Interference voltage suppression for f = n x (f1 +/- 0.5 %), f1 = interference frequency | |
| ● Series mode interference (peak value of interference < rated value of input range), min. | 60 dB |
| ● Common mode interference (USS < 2.5 V), min. | 80 dB; Interference voltage < 5 V |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes; Parameterizable |
| ● Hardware interrupt | Yes; (limit value alarm), can be parameterized for channel 0 |
| Diagnoses | |
| ● Diagnostic information readable | Yes |
| ● Wire-break | Yes; at 4 to 20 mA |
| ● Short-circuit | Yes; at 4 to 20 mA |
| ● Overflow/underflow | |
| Diagnostics indication LED | |
| ● Group error SF (red) | Yes |
| Parameter | |
| Comparison point | |
| Potential separation | |
| Potential separation analog inputs | |
| ● between the channels | No |
| ● between the channels and backplane bus | Yes |
| Permissible potential difference | |
| between the inputs (UCM) | |
| Between the inputs and MANA (UCM) | 5 Vpp AC |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Standards, approvals, certificates | |
| Suitable for applications according to AMS 2750 | |
| Suitable for applications according to CQI-9 | |
| Dimensions | |
| Width | 45 mm |
| Height | 130 mm |
| Depth | 35 mm |
| Weights | |
| Weight, approx. | 150 g |
Phân phối & báo giá 6ES7144-4GF01-0AB0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7144-4GF01-0AB0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Nhận thông báo qua Email
Mới nhất
