6ES7132-6BF61-0AA0 DQ 8×24 VDC/0.5A SNK BA SIMATIC ET 200SP

Liên hệ

SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Sink Basic, Sink output (NPN, M-switching), Packing unit: 1 piece, fits to BU-type A0, Colour Code CC01, substitute value output, module diagnostics for: supply voltage.

Tải về datasheet (pdf): Tại đây!

6ES7132-6BF61-0AA0 là module mở rộng đầu ra số (digital output module) cho CPU ET200SP được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7132-6BF61-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6BF61-0AA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bảng tóm tắt thông số kỹ thuật 6ES7132-6BF61-0AA0

SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Sink Basic, Sink output (NPN, M-switching), Packing unit: 1 piece, fits to BU-type A0, Colour Code CC01, substitute value output, module diagnostics for: supply voltage

Mã sản phẩm 6ES7132-6BF61-0AA0
Dòng sản phẩm SIMATIC ET 200SP, DQ 8x24VDC/0,5A SNK BA
Hãng sản xuất SIEMENS
Số lượng đầu ra số DQ 8x 24V DC/0,5A
Nguồn cung cấp 24 V DC (19.2 – 28.8 V DC)
Kích thước (RxCxS) 15 x 73 x 58 mm
Trọng lượng 30 g

Bảng chi tiết thông số kỹ thuật 6ES7132-6BF61-0AA0

Article number 6ES7132-6BF61-0AA0
ET 200SP, DQ 8x 24VDC/0,5A SINK BA, PU 1
General information
Product type designation DQ 8x24VDC/0,5A SNK BA
HW functional status From FS02
Firmware version V0.0
● FW update possible No
usable BaseUnits BU type A0
Color code for module-specific color identification plate CC01
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V14
● STEP 7 configurable/integrated from version V5.5 SP3
● PCS 7 configurable/integrated from version
● PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision GSDML V2.3
Operating mode
● DQ Yes
● DQ with energy-saving function No
● PWM No
● Oversampling No
● MSO No
Redundancy
● Redundancy capability Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection
Input current
Current consumption, max.
Output voltage
Rated value (DC) 24 V
Power loss
Power loss, typ. 1.5 W
Address area
Address space per module
● Address space per module, max.
● Outputs 1 byte
Hardware configuration
Automatic encoding Yes
● Mechanical coding element Yes
● Type of mechanical coding element type B
Selection of BaseUnit for connection variants
● 1-wire connection
● 2-wire connection
● 3-wire connection
● 4-wire connection
Digital outputs
Type of digital output Sink output (NPN)
Number of digital outputs 8
Current-sinking Yes
Current-sourcing
Digital outputs, parameterizable Yes
Short-circuit protection Yes
● Response threshold, typ. 1.5 A
Open-circuit detection
Limitation of inductive shutdown voltage to Typ. 47 V
Controlling a digital input Yes
Switching capacity of the outputs
● with resistive load, max. 0.5 A
● on lamp load, max. 5 W
Load resistance range
● lower limit 48 Ω
● upper limit 3 400 Ω
Output voltage
● for signal “1”, min.
Output current
● for signal “1” rated value 0.5 A
● for signal “1” permissible range, max. 0.5 A
● for signal “0” residual current, max. 5 µA
Output delay with resistive load
● “0” to “1”, typ.
● “0” to “1”, max. 300 µs
● “1” to “0”, typ.
● “1” to “0”, max. 600 µs
Parallel switching of two outputs
● for uprating No
● for redundant control of a load Yes
Switching frequency
● with resistive load, max. 100 Hz
● with inductive load, max. 0.5 Hz
● on lamp load, max. 10 Hz
Total current of the outputs
● Current per channel, max. 0.5 A
● Current per module, max. 4 A
Total current of the outputs (per module)
horizontal installation
— up to 40 °C, max.
— up to 50 °C, max.
— up to 60 °C, max. 4 A
vertical installation
— up to 30 °C, max.
— up to 40 °C, max.
— up to 50 °C, max. 4 A
Cable length
● shielded, max. 1 000 m
● unshielded, max. 600 m
Interrupts/diagnostics/status information
Diagnostics function Yes
Substitute values connectable Yes
Alarms
● Diagnostic alarm Yes
Diagnoses
● Monitoring the supply voltage Yes
● Wire-break No
● Short-circuit No
● Short-circuit to M
● Short-circuit to L+
● Group error Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes; green LED
● for channel diagnostics No
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions No
Suitable for safety-related tripping of standard modules No
Highest safety class achievable in safety mode
● Performance level according to ISO 13849-1
● SIL acc. to IEC 61508
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -25 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -25 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm
Weights
Weight, approx. 30 g

Phân phối & báo giá 6ES7132-6BF61-0AA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6BF61-0AA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

5/5 - (1 bình chọn)
Nhận thông báo qua Email
Nhận thông báo cho
guest

Mới nhất
Cũ nhất
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x