6ES7132-6BH00-2BA0 DQ 16×24 VDC/0.5A ST SIMATIC ET 200SP

Name: 6ES7132-6BH00-2BA0 DQ 16x24 VDC/0.5A ST SIMATIC ET 200SP
SKU: 6ES7132-6BH00-2BA0

Liên hệ

SIMATIC ET 200SP, digital output module, DQ 16x 24VDC/0.5A Standard, Pack quantity: 10 units, suitable for BU type A0, Color code CC00, Module diagnostics.

Tải về datasheet (pdf): Tại đây!

Mô tả sản phẩm
Đánh giá (0)

6ES7132-6BH00-2BA0 là module mở rộng đầu ra số (digital output module) cho CPU ET200SP được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7132-6BH00-2BA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6BH00-2BA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Mục lục

Bảng tóm tắt thông số kỹ thuật 6ES7132-6BH00-2BA0

SIMATIC ET 200SP, digital output module, DQ 16x 24VDC/0.5A Standard, Pack quantity: 10 units, suitable for BU type A0, Color code CC00, Module diagnostics

Mã sản phẩm	6ES7132-6BH00-2BA0
Dòng sản phẩm	SIMATIC ET 200SP, DQ 16×24 VDC/0.5 A ST
Hãng sản xuất	SIEMENS
Số lượng đầu ra số	DQ 16x 24VDC/0.5A
Nguồn cung cấp	24 V DC (19.2 – 28.8 V DC)
Kích thước (RxCxS)	15 x 73 x 58 mm
Trọng lượng	28 g

Bảng chi tiết thông số kỹ thuật 6ES7132-6BH00-2BA0

General information
Product type designation	DQ 16×24 VDC/0.5 A ST
Firmware version
● FW update possible	Yes
usable BaseUnits	BU type A0
Color code for module-specific color identification plate	CC00
Product function
● I&M data	Yes; I&M0 to I&M3
● Isochronous mode	No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	V11 SP2 / V13
● STEP 7 configurable/integrated from version	V5.5 SP3 / –
● PROFIBUS from GSD version/GSD revision	GSD Revision 5
● PROFINET from GSD version/GSD revision	GSDML V2.3
Operating mode
● DQ	Yes
● DQ with energy-saving function	No
● PWM	No
● Oversampling	No
● MSO	No
Redundancy
● Redundancy capability	Yes
Supply voltage
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
Input current
Current consumption, max.	60 mA; without load
Output voltage
Rated value (DC)	24 V
Power loss
Power loss, typ.	1 W
Address area
Address space per module
● Address space per module, max.	2 byte
Hardware configuration
Automatic encoding
● Mechanical coding element	Yes
Selection of BaseUnit for connection variants
● 1-wire connection	BU type A0
● 2-wire connection	BU type A0 + Potential distributor module
● 3-wire connection	BU type A0 + Potential distributor module
● 4-wire connection	BU type A0 + Potential distributor module
Digital outputs
Type of digital output	Source output (PNP, current-sourcing)
Number of digital outputs	16
Current-sinking	No
Current-sourcing	Yes
Digital outputs, parameterizable	Yes
Short-circuit protection	Yes
● Response threshold, typ.	0.7 to 1.3 A
Limitation of inductive shutdown voltage to	Typ. L+ (-50 V)
Controlling a digital input	Yes
Switching capacity of the outputs
● with resistive load, max.	0.5 A
● on lamp load, max.	5 W
Load resistance range
● lower limit	48 Ω
● upper limit	12 kΩ
Output current
● for signal “1” rated value	0.5 A
● for signal “0” residual current, max.	0.1 mA
Output delay with resistive load
● “0” to “1”, typ.	50 µs
● “1” to “0”, typ.	100 µs
Parallel switching of two outputs
● for uprating	No
● for redundant control of a load	Yes
Switching frequency
● with resistive load, max.	100 Hz
● with inductive load, max.	2 Hz
● on lamp load, max.	10 Hz
Total current of the outputs
● Current per channel, max.	0.5 A
● Current per module, max.	8 A
Total current of the outputs (per module)
horizontal installation
— up to 30 °C, max.	8 A
— up to 40 °C, max.	8 A
— up to 50 °C, max.	6 A
— up to 60 °C, max.	4 A
vertical installation
— up to 30 °C, max.	8 A
— up to 40 °C, max.	6 A
— up to 50 °C, max.	4 A
— up to 60 °C, max.	4 A
Cable length
● shielded, max.	1 000 m
● unshielded, max.	600 m
Interrupts/diagnostics/status information
Diagnostics function	Yes
Substitute values connectable	Yes
Alarms
● Diagnostic alarm	Yes
Diagnoses
● Monitoring the supply voltage	Yes
● Wire-break	Yes; Module-wise
● Short-circuit	Yes; Module-wise
● Group error	Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
● Channel status display	Yes; green LED
● for channel diagnostics	No
● for module diagnostics	Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels	No
● between the channels and backplane bus	Yes
Permissible potential difference
between different circuits	75 V DC/60 V AC (base isolation)
Isolation
Isolation tested with	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	No
Suitable for safety-related tripping of standard modules	Yes; From FS03
Highest safety class achievable in safety mode
● Performance level according to ISO 13849-1	PL d
● SIL acc. to IEC 61508	SIL 2
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	0 °C
● horizontal installation, max.	60 °C
● vertical installation, min.	0 °C; in all other mounting positions
● vertical installation, max.	50 °C; in all other mounting positions
Altitude during operation relating to sea level
● Ambient air temperature-barometric pressure-altitude	On request: Ambient temperatures lower than 0 °C (without condensation) and/or installation altitudes greater than 2 000 m
Dimensions
Width	15 mm
Height	73 mm
Depth	58 mm
Weights
Weight, approx.	28 g

Phân phối & báo giá 6ES7132-6BH00-2BA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6BH00-2BA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.