6ES7131-6BF00-0DA0 DI 8×24 VDC HS SIMATIC ET 200SP
Liên hệ
SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Speed, Pack quantity: 1 unit, three alternative operating modes: DI, Oversampling, 4x counters, suitable for BU type A0, Color code CC01.
Tải về datasheet (pdf): Tại đây!
6ES7131-6BF00-0DA0 là module mở rộng đầu vào số (digital input module) được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7131-6BF00-0DA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7131-6BF00-0DA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Bảng tóm tắt thông số kỹ thuật 6ES7131-6BF00-0DA0
SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Speed, Pack quantity: 1 unit, three alternative operating modes: DI, Oversampling, 4x counters, suitable for BU type A0, Color code CC01
| Mã sản phẩm | 6ES7131-6BF00-0DA0 |
| Dòng sản phẩm | SIMATIC ET 200SP, DI 8×24 V DC HS |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu vào số | DI 8x 24 V DC High Feature |
| Nguồn cung cấp | 24 V DC (19.2 – 28.8 V DC) |
| Kích thước (RxCxS) | 15 x 73 x 58 mm |
| Trọng lượng | 28 g |
Bảng chi tiết thông số kỹ thuật 6ES7131-6BF00-0DA0
| Article number | 6ES7131-6BF00-0DA0 |
| ET 200SP, DI 8x24VDC High Speed | |
| General information | |
| Product type designation | DI 8×24 V DC HS |
| HW functional status | from FS04 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type A0 |
| Color code for module-specific color identification plate | CC01 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | Yes |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V13 SP1 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 / – |
| ● PCS 7 configurable/integrated from version | |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● DI | Yes |
| ● Counter | Yes |
| ● Oversampling | Yes |
| ● MSI | No |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Rated value (AC) | |
| permissible range, lower limit (AC) | |
| permissible range, upper limit (AC) | |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption (rated value) | |
| Current consumption, max. | 70 mA; without sensor supply |
| Encoder supply | |
| Number of outputs | |
| Output voltage, min. | |
| Short-circuit protection | |
| Output current | |
| ● up to 60 °C, max. | |
| 24 V encoder supply | |
| ● 24 V | Yes |
| ● Short-circuit protection | Yes; per module, electronic |
| ● Output current, max. | 700 mA |
| ● Output current per channel, max. | |
| ● Output current per module, max. | |
| Power loss | |
| Power loss, typ. | 1.5 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 45 byte |
| ● Inputs | 32 byte; 1 byte + 1 byte for QI information in DI mode; 32 bytes in Oversampling mode; 25 bytes in Counter mode |
| ● Outputs | 20 byte; In count mode |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | Type A |
| Submodules | |
| ● Number of configurable submodules, max. | |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type A0 |
| ● 2-wire connection | BU type A0 |
| ● 3-wire connection | BU type A0 with AUX terminals |
| ● 4-wire connection | BU type A0 + external terminals |
| Digital inputs | |
| Number of digital inputs | 8 |
| Digital inputs, parameterizable | |
| Source/sink input | P-reading |
| Input characteristic curve in accordance with IEC 61131, type 1 | |
| Input characteristic curve in accordance with IEC 61131, type 2 | |
| Input characteristic curve in accordance with IEC 61131, type 3 | |
| Pulse extension | Yes |
| ● Length | 2 s; 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s |
| Edge evaluation | |
| Signal change flutter | |
| Flutter observation window | |
| Digital input functions, parameterizable | |
| ● Gate start/stop | Yes |
| ● Freely usable digital input | Yes |
| ● Counter | Yes |
| — Number, max. | 4 |
| — Counting frequency, max. | 10 kHz |
| — Counting width | 32 bit |
| — Counting direction up/down | Yes |
| ● Digital input with oversampling | Yes |
| — Number, max. | 8 |
| — Values per cycle, max. | 32 |
| — Resolution, min. | 7.8125 µs |
| Input voltage | |
| ● Rated value (DC) | 24 V |
| — 24 V DC | |
| ● Rated value (AC) | |
| ● for signal “0” | -30 to +5 V |
| ● for signal “1” | +11 to +30V |
| Input current | |
| ● for signal “1”, typ. | 6 mA |
| for 10 k switched contact | |
| — for signal “0” | |
| — for signal “1” | |
| for unswitched contact | |
| — for signal “0”, max. (permissible quiescent current) | |
| — for signal “1” | |
| for NAMUR encoders | |
| — for signal “0” | |
| — for signal “1” | |
| Input delay (for rated value of input voltage) | |
| ● tolerated changeover time for changeover contacts | |
| for standard inputs | |
| — parameterizable | Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms |
| — at “0” to “1”, min. | |
| — at “0” to “1”, max. | |
| — at “1” to “0”, min. | |
| — at “1” to “0”, max. | |
| for interrupt inputs | |
| — parameterizable | Yes |
| for technological functions | |
| — parameterizable | Yes |
| for NAMUR inputs | |
| — at “0” to “1”, max. | |
| — at “1” to “0”, max. | |
| Cable length | |
| ● shielded, max. | 50 m |
| ● unshielded, max. | 50 m |
| Encoder | |
| Connectable encoders | |
| ● NAMUR encoder/changeover contact according to EN 60947 | |
| ● Single contact / changeover contact unconnected | |
| ● Single contact / changeover contact connected with 10 kΩ | |
| ● 2-wire sensor | Yes |
| — permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Isochronous mode | |
| Filtering and processing time (TCI), min. | |
| Bus cycle time (TDP), min. | 125 µs |
| Jitter, max. | 5 µs |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| ● Hardware interrupt | Yes |
| Diagnoses | |
| ● Diagnostic information readable | Yes |
| ● Monitoring the supply voltage | Yes |
| — parameterizable | Yes |
| ● Monitoring of encoder power supply | Yes; Module-wise |
| ● Wire-break | No |
| ● Short-circuit | Yes; Module-wise |
| ● Group error | |
| Diagnostics indication LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | No |
| ● for module diagnostics | Yes; green/red DIAG LED |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | No |
| ● between the channels and backplane bus | Yes |
| ● between the channels and the power supply of the electronics | No |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Standards, approvals, certificates | |
| Suitable for safety functions | No |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C; < 0 °C as of FS04 |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C; < 0 °C as of FS04 |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions | |
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weights | |
| Weight, approx. | 28 g |
Phân phối & báo giá 6ES7131-6BF00-0DA0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7131-6BF00-0DA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Nhận thông báo qua Email
Đăng nhập
