6ES7131-6BF01-0AA0 DI 8×24 VDC BA SIMATIC ET 200SP

Liên hệ

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Basic, type 2 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour Code CC01, input delay time 0,05..20ms, module diagnostics for: supply voltage.

Tải về datasheet (pdf): Tại đây!

6ES7131-6BF01-0AA0 là module mở rộng đầu vào số (digital input module) được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7131-6BF01-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7131-6BF01-0AA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bảng tóm tắt thông số kỹ thuật 6ES7131-6BF01-0AA0

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Basic, type 2 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour Code CC01, input delay time 0,05..20ms, module diagnostics for: supply voltage

Mã sản phẩm 6ES7131-6BF01-0AA0
Dòng sản phẩm SIMATIC ET 200SP, DI 8 x 24 V DC BA
Hãng sản xuất SIEMENS
Số lượng đầu vào số DI 8x 24V DC Basic
Nguồn cung cấp 24 V DC (19.2 – 28.8 V DC)
Kích thước (RxCxS) 15 x 73 x 58 mm
Trọng lượng 28 g

Bảng chi tiết thông số kỹ thuật 6ES7131-6BF01-0AA0

Article number 6ES7131-6BF01-0AA0
ET 200SP, DI 8x 24V DC Basic, PU 1
General information  
Product type designation DI 8x24VDC BA
HW functional status FS03
Firmware version V0.0
● FW update possible No
usable BaseUnits BU type A0
Color code for module-specific color identification plate CC01
Product function  
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
Engineering with  
● STEP 7 TIA Portal configurable/integrated from version V14
● STEP 7 configurable/integrated from version V5.5 SP3 / –
● PCS 7 configurable/integrated from version
● PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision GSDML V2.3
Operating mode  
● DI Yes
● Counter No
● Oversampling No
● MSI No
Supply voltage  
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current  
Current consumption, max. 70 mA; All channels are supplied from the encoder supply
Encoder supply  
Number of outputs 8
Output voltage, min. 19.2 V
Short-circuit protection Yes; per module
24 V encoder supply  
● 24 V Yes
● Short-circuit protection Yes
● Output current, max.
● Output current per channel, max. 700 mA
● Output current per module, max. 700 mA
Power loss  
Power loss, typ. 1.6 W; 24 V, 8 inputs supplied via encoder supply
Address area  
Address space per module  
● Inputs 1 byte
Hardware configuration  
Automatic encoding Yes
● Mechanical coding element Yes
● Type of mechanical coding element Type A
Selection of BaseUnit for connection variants  
● 1-wire connection BU type A0
● 2-wire connection BU type A0
● 3-wire connection BU type A0 with AUX terminals or potential distributor module
● 4-wire connection BU type A0 + Potential distributor module
Digital inputs  
Number of digital inputs 8
Digital inputs, parameterizable Yes
Source/sink input P-reading
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input characteristic curve in accordance with IEC 61131, type 2 Yes
Input characteristic curve in accordance with IEC 61131, type 3 Yes
Input voltage  
● Rated value (DC) 24 V
— 24 V DC Yes
● for signal “0” -30 to +5 V
● for signal “1” +11 to +30V
Input current  
● for signal “1”, typ. 6.8 mA
Input delay (for rated value of input voltage)  
for standard inputs  
— parameterizable Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)
— at “0” to “1”, min. 0.05 ms
— at “0” to “1”, max. 20 ms
— at “1” to “0”, min. 0.05 ms
— at “1” to “0”, max. 20 ms
Cable length  
● shielded, max. 1 000 m
● unshielded, max. 600 m
Encoder  
Connectable encoders  
● 2-wire sensor Yes
— permissible quiescent current (2-wire sensor), max. 2 mA
Interrupts/diagnostics/status information  
Diagnostics function Yes
Alarms  
● Diagnostic alarm Yes
Diagnoses  
● Diagnostic information readable Yes
● Monitoring the supply voltage Yes
— parameterizable Yes
● Monitoring of encoder power supply No
● Wire-break No
● Short-circuit No
● Group error Yes
Diagnostics indication LED  
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes; green LED
● for channel diagnostics No
● for module diagnostics Yes; green/red DIAG LED
Potential separation  
Potential separation channels  
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics No
Isolation  
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates  
Suitable for safety functions
Ambient conditions  
Ambient temperature during operation  
● horizontal installation, min. -30 °C; < 0 °C as of FS03
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C; < 0 °C as of FS03
● vertical installation, max. 50 °C
Altitude during operation relating to sea level  
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions  
Width 15 mm
Height 73 mm
Depth 58 mm
Weights  
Weight, approx. 28 g

Phân phối & báo giá 6ES7131-6BF01-0AA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7131-6BF01-0AA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

5/5 - (1 bình chọn)
Nhận thông báo qua Email
Nhận thông báo cho
guest

Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x