6EP1333-1LB00 Bộ nguồn 24VDC/5A (120/230VAC) SITOP PSU100L

Name: Bộ nguồn 24VDC/5A (120/230VAC) SITOP PSU100L 6EP1333-1LB00
SKU: 6EP1333-1LB00

Liên hệ

SITOP PSU100L 24 V/5 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/5 A.

Tải về datasheet (pdf): Tại đây!

6EP1333-1LB00 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP1333-1LB00 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1333-1LB00 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bộ nguồn 24VDC/5A (120/230VAC) SITOP PSU100L 6EP1333-1LB00

Mục lục

Bảng tóm tắt thông số kỹ thuật 6EP1333-1LB00

SITOP PSU100L 24 V/5 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/5 A

Mã sản phẩm	6EP1333-1LB00
Dòng sản phẩm	SITOP PSU100L
Hãng sản xuất	SIEMENS
Nguồn đầu vào	120/230 V AC
Nguồn đầu ra	24 V DC/5 A
Kích thước (RxCxS)	50 x 125 x 120 mm
Trọng lượng	500 g

Bảng chi tiết thông số kỹ thuật 6EP1333-1LB00

Article number	6EP1333-1LB00
Product	SITOP PSU100L
Power supply, type	24 V/5 A
Input
Input	1-phase AC
Rated voltage value Vin rated
● Note	Set by means of selector switch on the device
supply voltage
● 1 at AC rated value	120 V
● 2 at AC rated value	230 V
● at DC
input voltage
● 1 at AC	93 … 132 V
● 2 at AC	187 … 264 V
● at DC
Wide-range input	No
Overvoltage resistance	2.3 × Vin rated, 1.3 ms
Mains buffering	at Vin = 93/187 V
Mains buffering at Iout rated, min.	20 ms; at Vin = 93/187 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
input current
● at rated input voltage 120 V	2.1 A
● at rated input voltage 230 V	1.15 A
Switch-on current limiting (+25 °C), max.	32 A
duration of inrush current limiting at 25 °C
● typical	3 ms
I²t, max.	0.8 A²·s
Built-in incoming fuse	T 3,15 A/250 V (not accessible)
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: from 6 A characteristic C
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V

● output voltage at output 1 at DC rated value	24 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	0.5 %
Residual ripple peak-peak, max.	150 mV
Residual ripple peak-peak, typ.	50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	240 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)	150 mV
Adjustment range	22.8 … 26.4 V
product function output voltage adjustable	Yes
Output voltage setting	via potentiometer
Status display	Green LED for 24 V OK
On/off behavior	Overshoot of Vout approx. 4 %
Startup delay, max.	1.5 s
Voltage rise, typ.	130 ms
Rated current value Iout rated	5 A
Current range	0 … 5 A
● Note	+45 … +60 °C: Derating 2%/K
supplied active power typical	120 W
Parallel switching for enhanced performance	Yes
Numbers of parallel switchable units for enhanced performance	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	86 %
Power loss at Vout rated, Iout rated, approx.	17 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.3 %
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.	2 %
Load step setting time 10 to 90%, typ.	0.4 ms
Load step setting time 90 to 10%, typ.	0.4 ms
Protection and monitoring
Output overvoltage protection	< 33 V
Current limitation, typ.	5.25 A
property of the output short-circuit proof	Yes
Short-circuit protection	Constant current characteristic
enduring short circuit current RMS value
● typical	8 A
Overload/short-circuit indicator	–
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I
leakage current
● maximum	3.5 mA
● typical	0.4 mA
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
Explosion protection	–
certificate of suitability NEC Class 2	No
FM approval	–
CB approval	Yes
certificate of suitability EAC approval	Yes
Marine approval	–
EMC
Emitted interference	EN 55022 Class A
Supply harmonics limitation	–
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	0 … 60 °C
— Note	with natural convection
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	screw-type terminals
Connections
● Supply input	L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded
● Output	+, -: 2 screw terminals each for 0.5 … 2.5 mm²
● Auxiliary	–
width of the enclosure	50 mm
height of the enclosure	125 mm
depth of the enclosure	120 mm
required spacing
● top	50 mm
● bottom	50 mm
● left	0 mm
● right	0 mm
Weight, approx.	0.5 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Snaps onto DIN rail EN 60715 35×7.5/15
MTBF at 40 °C	3 076 166 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP1333-1LB00

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1333-1LB00 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.