6EP3134-0TA00-0AY0 Bộ nguồn 24VDC/10A (in 14-32VDC) SITOP PSU3400

Name: Bộ nguồn 24VDC/10A (in 14-32VDC) SITOP PSU3400 6EP3134-0TA00-0AY0
SKU: 6EP3134-0TA00-0AY0

Liên hệ

SITOP PSU3400 24 V/10 A Stabilized power supply Input: 24 V DC (14…32 V) Output: 24 V DC/10 A.

Tải về datasheet (pdf): Tại đây!

6EP3134-0TA00-0AY0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP3134-0TA00-0AY0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3134-0TA00-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bộ nguồn 24VDC/10A (in 14-32VDC) SITOP PSU3400 6EP3134-0TA00-0AY0

Mục lục

Bảng tóm tắt thông số kỹ thuật 6EP3134-0TA00-0AY0

SITOP PSU3400 24 V/10 A Stabilized power supply Input: 24 V DC (14…32 V) Output: 24 V DC/10 A

Mã sản phẩm	6EP3134-0TA00-0AY0
Dòng sản phẩm	SITOP PSU3400
Hãng sản xuất	SIEMENS
Nguồn đầu vào	24 V DC (14…32 V)
Nguồn đầu ra	24 V DC/10 A
Kích thước (RxCxS)	42 x 125 x 120 mm
Trọng lượng	600 g

Bảng chi tiết thông số kỹ thuật 6EP3134-0TA00-0AY0

Article number	6EP3134-0TA00-0AY0
Product	SITOP PSU3400
Power supply, type	24 V/10 A
Input
Input	DC voltage
● Note	Startup as of 18 V, derating necessary for 14 … 18 V DC
supply voltage
● at DC	24 … 24 V
input voltage
● at DC	14 … 32 V
Wide-range input	No
Overvoltage resistance	–
Mains buffering	at Vin = 24 V
Mains buffering at Iout rated, min.	5 ms; at Vin = 24 V
input current
● at rated input voltage 24 V	10.8 A
● at rated input voltage 48 V
Switch-on current limiting (+25 °C), max.	15 A
I²t, max.	0.6 A²·s
Built-in incoming fuse	25 A (not accessible), breaking capacity 300 A
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: 16 A characteristic B or C
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V

● output voltage at output 1 at DC rated value	24 V
Total tolerance, static ±	1 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	0.3 %
Residual ripple peak-peak, max.	150 mV
Residual ripple peak-peak, typ.	30 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	250 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)	50 mV
Adjustment range	24 … 28 V
product function output voltage adjustable	Yes
Output voltage setting	via potentiometer
Status display	Green LED for 24 V OK
Signaling	Relay contact (NO contact, contact rating 30 V AC/0.5 A; 60 V DC/0.3 A; 30 V DC/1 A) for 24 V O.K.
On/off behavior	No overshoot of Vout (soft start)
Startup delay, max.	0.5 s
Voltage rise, typ.	10 ms
voltage increase time of the output voltage maximum	20 ms
Rated current value Iout rated	10 A
Current range	0 … 12.5 A
● Note	12 A up to +40°C; +60 … +70 °C: Derating 2%/K
supplied active power typical	260 W
Parallel switching for enhanced performance	Yes
Numbers of parallel switchable units for enhanced performance	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	93 %
Power loss at Vout rated, Iout rated, approx.	20 W
power loss [W] during no-load operation maximum	1.5 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.3 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	2 %
Load step setting time 50 to 100%, typ.	1 ms
Load step setting time 100 to 50%, typ.	1 ms
Protection and monitoring
Output overvoltage protection	Ua < 35 V
Current limitation, typ.	13 A
property of the output short-circuit proof	Yes
Short-circuit protection	Electronic shutdown, automatic restart
Overload/short-circuit indicator	Yellow LED overload
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra low output voltage Vout according to EN 60950-1
Protection class	Class III
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
Explosion protection	–
certificate of suitability NEC Class 2	No
FM approval	–
CB approval	Yes
certificate of suitability EAC approval	Yes
Regulatory Compliance Mark (RCM)	Yes
Marine approval	ABS, DNV GL
EMC
Emitted interference	EN 61000-6-3
Supply harmonics limitation	not applicable
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	-25 … +70 °C
— Note	with natural convection
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	screw-type terminals
Connections
● Supply input	L, N, FE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded
● Output	+, -: 2 screw terminals each for 0.5 … 2.5 mm²
● Auxiliary	Alarm signals: 2 screw terminals for 0.5 … 2.5 mm²
● signaling contact	2 screw terminals for 0.5 … 2.5 mm²
width of the enclosure	42 mm
height of the enclosure	125 mm
depth of the enclosure	120 mm
required spacing
● top	50 mm
● bottom	50 mm
● left	0 mm
● right	0 mm
Weight, approx.	0.6 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Snaps onto DIN rail EN 60715 35×7.5/15
electrical accessories	Buffer module
MTBF at 40 °C	1 579 080 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP3134-0TA00-0AY0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3134-0TA00-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.