6EP1336-2BA10 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP1336-2BA10 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1336-2BA10 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6EP1336-2BA10
SITOP PSU100S 20 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/20 A.
Mã sản phẩm | 6EP1336-2BA10 |
Dòng sản phẩm | SITOP PSU100S |
Hãng sản xuất | SIEMENS |
Nguồn đầu vào | 120/230 V AC |
Nguồn đầu ra | 24 V DC/20 A |
Kích thước (RxCxS) | 115 x 145 x 150 mm |
Trọng lượng | 2 400 g |
Bảng chi tiết thông số kỹ thuật 6EP1336-2BA10
Article number | 6EP1336-2BA10 |
Product | SITOP PSU100S |
Power supply, type | 24 V/20 A |
Input | |
Input | 1-phase AC |
● Note | Automatic range selection |
supply voltage | |
● 1 at AC rated value | 120 V |
● 2 at AC rated value | 230 V |
input voltage | |
● 1 at AC | 85 … 132 V |
● 2 at AC | 176 … 264 V |
Wide-range input | No |
Overvoltage resistance | 2.3 × Vin rated, 1.3 ms |
Mains buffering | at Vin = 120/230 V |
Mains buffering at Iout rated, min. | 20 ms; at Vin = 120/230 V |
Rated line frequency 1 | 50 Hz |
Rated line frequency 2 | 60 Hz |
Rated line range | 47 … 63 Hz |
input current | |
● at rated input voltage 120 V | 7.5 A |
● at rated input voltage 230 V | 3.5 A |
Switch-on current limiting (+25 °C), max. | 11 A |
I²t, max. | 10 A²·s |
Built-in incoming fuse | T 10 A (not accessible) |
Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: from 10 A characteristic C or circuit-breaker 3RV2411-1JA10 (120 V) or 3RV2411-1FA10 (230 V) |
Output | |
Output | Controlled, isolated DC voltage |
Rated voltage Vout DC | 24 V |
● output voltage at output 1 at DC rated value | 24 V |
Total tolerance, static ± | 3 % |
Static mains compensation, approx. | 0.5 % |
Static load balancing, approx. | 1 % |
Residual ripple peak-peak, max. | 150 mV |
Residual ripple peak-peak, typ. | |
Spikes peak-peak, max. (bandwidth: 20 MHz) | 240 mV |
Spikes peak-peak, typ. (bandwidth: 20 MHz) | |
Adjustment range | 24 … 28 V |
product function output voltage adjustable | Yes |
Output voltage setting | via potentiometer; max. 480 W |
Status display | Green LED for 24 V OK |
Signaling | Relay contact (NO contact, rating 50 V DC/ 0.3 A) for “24 V OK” |
On/off behavior | No overshoot of Vout (soft start) |
Startup delay, max. | 1.5 s |
Voltage rise, typ. | 50 ms |
voltage increase time of the output voltage maximum | 500 ms |
Rated current value Iout rated | 20 A |
Current range | 0 … 20 A |
● Note | 24 A up to +45°C; +60 … +70 °C: Derating 5%/K |
supplied active power typical | 480 W |
short-term overload current | |
● on short-circuiting during the start-up typical | 35 A |
● at short-circuit during operation typical | 35 A |
duration of overloading capability for excess current | |
● on short-circuiting during the start-up | 100 ms |
● at short-circuit during operation | 100 ms |
Parallel switching for enhanced performance | Yes |
Numbers of parallel switchable units for enhanced performance | 2 |
Efficiency | |
Efficiency at Vout rated, Iout rated, approx. | 90 % |
Power loss at Vout rated, Iout rated, approx. | 53 W |
Closed-loop control | |
Dynamic mains compensation (Vin rated ±15 %), max. | 1 % |
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. | 3 % |
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. | |
Load step setting time 10 to 90%, typ. | |
Load step setting time 90 to 10%, typ. | |
setting time maximum | 10 ms |
Protection and monitoring | |
Output overvoltage protection | Yes, according to EN 60950-1 |
Current limitation | |
Current limitation, typ. | 21 A |
property of the output short-circuit proof | Yes |
Short-circuit protection | Electronic shutdown, automatic restart |
enduring short circuit current RMS value | |
● maximum | 7 A |
● typical | |
overcurrent overload capability in normal operation | overload capability 150 % Iout rated up to 5 s/min |
Overload/short-circuit indicator | – |
Safety | |
Primary/secondary isolation | Yes |
galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
Protection class | Class I |
leakage current | |
● maximum | 3.5 mA |
● typical | 1 mA |
Degree of protection (EN 60529) | IP20 |
Approvals | |
CE mark | Yes |
UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259, cCSAus (CSA C22.2 No. 60950-1, UL 60950-1) |
Explosion protection | IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex ec nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T4 |
certificate of suitability NEC Class 2 | No |
FM approval | – |
CB approval | Yes |
certificate of suitability EAC approval | Yes |
Marine approval | DNV GL |
EMC | |
Emitted interference | EN 55022 Class B |
Supply harmonics limitation | EN 61000-3-2 |
Noise immunity | EN 61000-6-2 |
environmental conditions | |
ambient temperature | |
● during operation | 0 … 70 °C |
— Note | with natural convection |
● during transport | -40 … +85 °C |
● during storage | -40 … +85 °C |
Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
Mechanics | |
Connection technology | screw-type terminals |
Connections | |
● Supply input | L1, N, PE: 1 screw terminal each for 0.2 … 4 mm² single-core/finely stranded |
● Output | +, -: 2 screw terminals each for 0.2 … 4 mm² |
● Auxiliary | 13, 14 (alarm signal): 1 screw terminal each for 0.14 … 1.5 mm² |
● signaling contact | |
width of the enclosure | 115 mm |
height of the enclosure | 145 mm |
depth of the enclosure | 150 mm |
required spacing | |
● top | 50 mm |
● bottom | 50 mm |
● left | 0 mm |
● right | 0 mm |
Weight, approx. | 2.4 kg |
product feature of the enclosure housing can be lined up | Yes |
Installation | Snaps onto DIN rail EN 60715 35×7.5/15 |
electrical accessories | Buffer module |
mechanical accessories | Device identification label 20 mm × 7 mm, pale turquoise 3RT1900-1SB20 |
MTBF at 40 °C | 1 778 916 h |
other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối & báo giá 6EP1336-2BA10
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1336-2BA10 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.