6EP1333-3BA10 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP1333-3BA10 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1333-3BA10 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6EP1333-3BA10
SITOP PSU200M 5 A Stabilized power supply input: 120/230-500 V AC output: 24 V DC/5 A
Mã sản phẩm | 6EP1333-3BA10 |
Dòng sản phẩm | SITOP PSU200M |
Hãng sản xuất | SIEMENS |
Nguồn đầu vào | 120/230-500 V AC |
Nguồn đầu ra | 24 V DC/5 A |
Kích thước (RxCxS) | 70 x 125 x 121 mm |
Trọng lượng | 600 g |
Bảng chi tiết thông số kỹ thuật 6EP1333-3BA10
Article number | 6EP1333-3BA10 |
Product | SITOP PSU200M |
Power supply, type | 24 V/5 A |
Input | |
Input | 1-phase and 2-phase AC |
● Note | Set by means of selector switch on the device; starting from Vin > 90/180 V |
supply voltage | |
● 1 at AC | 120 … 230 V |
● 2 at AC | 230 … 500 V |
input voltage | |
● 1 at AC | 85 … 264 V |
● 2 at AC | 176 … 550 V |
Wide-range input | Yes |
Overvoltage resistance | 1300 Vpeak, 1.3 ms |
Mains buffering | at Vin = 120/230 V, typ. 150 ms at Vin = 400 V |
Mains buffering at Iout rated, min. | 25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V |
Rated line frequency 1 | 50 Hz |
Rated line frequency 2 | 60 Hz |
Rated line range | 47 … 63 Hz |
input current | |
● at rated input voltage 120 V | 2.2 A |
● at rated input voltage 230 V | 1.2 A |
● at rated input voltage 500 V | 0.61 A |
Switch-on current limiting (+25 °C), max. | 35 A |
I²t, max. | 1.7 A²·s |
Built-in incoming fuse | T 3.15 A (not accessible) |
Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V |
Output | |
Output | Controlled, isolated DC voltage |
Rated voltage Vout DC | 24 V |
● output voltage at output 1 at DC rated value | 24 V |
Total tolerance, static ± | 3 % |
Static mains compensation, approx. | 0.1 % |
Static load balancing, approx. | 0.1 % |
Residual ripple peak-peak, max. | 50 mV |
Spikes peak-peak, max. (bandwidth: 20 MHz) | 200 mV |
Adjustment range | 24 … 28.8 V |
product function output voltage adjustable | Yes |
Output voltage setting | via potentiometer |
Status display | Green LED for 24 V OK |
Signaling | Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK” |
On/off behavior | Overshoot of Vout approx. 3 % |
Startup delay, max. | 1 s |
Voltage rise, typ. | 50 ms |
Rated current value Iout rated | 5 A |
Current range | 0 … 5 A |
● Note | |
supplied active power typical | 120 W |
short-term overload current | |
● at short-circuit during operation typical | 15 A |
duration of overloading capability for excess current | |
● at short-circuit during operation | 25 ms |
constant overload current | |
● on short-circuiting during the start-up typical | 6 A |
Parallel switching for enhanced performance | Yes; switchable characteristic |
Numbers of parallel switchable units for enhanced performance | 2 |
Efficiency | |
Efficiency at Vout rated, Iout rated, approx. | 88 % |
Power loss at Vout rated, Iout rated, approx. | 17 W |
power loss [W] during no-load operation maximum | 4 W |
Closed-loop control | |
Dynamic mains compensation (Vin rated ±15 %), max. | 0.1 % |
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. | 3 % |
Load step setting time 50 to 100%, typ. | 2 ms |
Load step setting time 100 to 50%, typ. | 2 ms |
setting time maximum | 5 ms |
Protection and monitoring | |
Output overvoltage protection | < 35 V |
Current limitation, typ. | 6 A |
property of the output short-circuit proof | Yes |
Short-circuit protection | Alternatively, constant current characteristic approx. 5.5 A or latching shutdown |
enduring short circuit current RMS value | |
● typical | 6 A |
Overload/short-circuit indicator | LED yellow for “overload”, LED red for “latching shutdown” |
Safety | |
Primary/secondary isolation | Yes |
galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
Protection class | Class I |
leakage current | |
● maximum | 3.5 mA |
● typical | 0.25 mA |
Degree of protection (EN 60529) | IP20 |
Approvals | |
CE mark | Yes |
UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259, cCSAus (CSA C22.2 No. 60950-1, UL 60950-1) |
Explosion protection | IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3 |
certificate of suitability NEC Class 2 | No |
FM approval | – |
CB approval | Yes |
certificate of suitability EAC approval | Yes |
Marine approval | ABS, DNV GL |
EMC | |
Emitted interference | EN 55022 Class B |
Supply harmonics limitation | EN 61000-3-2 |
Noise immunity | EN 61000-6-2 |
environmental conditions | |
ambient temperature | |
● during operation | -25 … +70 °C |
— Note | With natural convection; startup tested starting from -40 °C nominal voltage |
● during transport | -40 … +85 °C |
● during storage | -40 … +85 °C |
Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
Mechanics | |
Connection technology | screw-type terminals |
Connections | |
● Supply input | L, N, PE: 1 screw terminal each for 0.2 … 2.5 mm² single-core/finely stranded |
● Output | +, -: 2 screw terminals each for 0.2 … 2.5 mm² |
● Auxiliary | 13, 14 (alarm signal): 1 screw terminal each for 0.14 … 1.5 mm² |
width of the enclosure | 70 mm |
height of the enclosure | 125 mm |
depth of the enclosure | 121 mm |
required spacing | |
● top | 50 mm |
● bottom | 50 mm |
● left | 0 mm |
● right | 0 mm |
Weight, approx. | 0.6 kg |
product feature of the enclosure housing can be lined up | Yes |
Installation | Snaps onto DIN rail EN 60715 35×7.5/15 |
electrical accessories | Buffer module |
MTBF at 40 °C | 1 123 973 h |
other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối & báo giá 6EP1333-3BA10
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1333-3BA10 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.