6ES7131-6FD01-0BB1 DI 4×120 … 230 VAC ST SIMATIC ET 200SP
Liên hệ
SIMATIC ET 200SP, Digital input module, DI 4x 120..230V AC Standard, type 3 (IEC 61131), Packing unit: 1 piece, fits to BU-type B1, Colour Code CC41, module diagnostics.
Tải về datasheet (pdf): Tại đây!
6ES7131-6FD01-0BB1 là module mở rộng đầu vào số (digital input module) được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7131-6FD01-0BB1 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7131-6FD01-0BB1 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7131-6FD01-0BB1
SIMATIC ET 200SP, Digital input module, DI 4x 120..230V AC Standard, type 3 (IEC 61131), Packing unit: 1 piece, fits to BU-type B1, Colour Code CC41, module diagnostics
| Mã sản phẩm | 6ES7131-6FD01-0BB1 |
| Dòng sản phẩm | SIMATIC ET 200SP, DI 4×120 … 230 V AC ST |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu vào số | DI 4x 120..230V AC Standard |
| Nguồn cung cấp | 230 V AC |
| Kích thước (RxCxS) | 20 x 73 x 58 mm |
| Trọng lượng | 36 g |
Bảng chi tiết thông số kỹ thuật 6ES7131-6FD01-0BB1
| Article number | 6ES7131-6FD01-0BB1 |
| ET 200SP, DI 4x 120..230VvAC ST | |
| General information | |
| Product type designation | DI 4×120 … 230 V AC ST |
| HW functional status | From FS02 |
| Firmware version | V0.0 |
| ● FW update possible | No |
| usable BaseUnits | BU type B1 |
| Color code for module-specific color identification plate | CC41 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V14 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 |
| ● PCS 7 configurable/integrated from version | |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● DI | Yes |
| ● Counter | No |
| ● Oversampling | No |
| ● MSI | No |
| Supply voltage | |
| Rated value (DC) | |
| permissible range, lower limit (DC) | |
| permissible range, upper limit (DC) | |
| Rated value (AC) | 230 V |
| permissible range, lower limit (AC) | |
| permissible range, upper limit (AC) | |
| Reverse polarity protection | No |
| Input current | |
| Current consumption (rated value) | 10 mA |
| Current consumption, max. | |
| Encoder supply | |
| Number of outputs | 4 |
| Output voltage, min. | |
| Short-circuit protection | No; when using BU type B1, a fuse with 10 A tripping current must be provided |
| Output current | |
| ● up to 60 °C, max. | 10 A |
| 24 V encoder supply | |
| ● 24 V | |
| ● Short-circuit protection | |
| ● Output current, max. | |
| ● Output current per channel, max. | |
| ● Output current per module, max. | |
| Power loss | |
| Power loss, typ. | 1 W; Active power, load voltage 230 V, all inputs connected with 230 V, 50 Hz |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | |
| ● Inputs | 1 byte; + 1 byte for QI information |
| ● Outputs | |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | |
| Submodules | |
| ● Number of configurable submodules, max. | |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type B1 |
| ● 2-wire connection | BU type B1 |
| ● 3-wire connection | BU type B1 |
| ● 4-wire connection | BU type B1 + potential distributor module |
| Digital inputs | |
| Number of digital inputs | 4 |
| Digital inputs, parameterizable | |
| Source/sink input | |
| Input characteristic curve in accordance with IEC 61131, type 1 | |
| Input characteristic curve in accordance with IEC 61131, type 2 | |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Pulse extension | |
| ● Length | |
| Edge evaluation | |
| Signal change flutter | |
| Flutter observation window | |
| Digital input functions, parameterizable | |
| ● Gate start/stop | |
| ● Freely usable digital input | |
| ● Counter | |
| — Number, max. | |
| — Counting frequency, max. | |
| — Counting width | |
| — Counting direction up/down | |
| ● Digital input with oversampling | |
| — Number, max. | |
| — Values per cycle, max. | |
| — Resolution, min. | |
| Input voltage | |
| ● Rated value (DC) | |
| — 24 V DC | |
| ● Rated value (AC) | 230 V |
| ● for signal “0” | 0V AC to 40V AC |
| ● for signal “1” | 74 V AC to 264 V AC |
| Input current | |
| ● for signal “1”, typ. | 10.8 mA |
| for 10 k switched contact | |
| — for signal “0” | |
| — for signal “1” | |
| for unswitched contact | |
| — for signal “0”, max. (permissible quiescent current) | |
| — for signal “1” | |
| for NAMUR encoders | |
| — for signal “0” | |
| — for signal “1” | |
| Input delay (for rated value of input voltage) | |
| ● tolerated changeover time for changeover contacts | |
| for standard inputs | |
| — parameterizable | No |
| — at “0” to “1”, min. | 1.5 ms |
| — at “0” to “1”, max. | 4 ms |
| — at “1” to “0”, min. | 10 ms |
| — at “1” to “0”, max. | 10 ms |
| for interrupt inputs | |
| — parameterizable | |
| for technological functions | |
| — parameterizable | |
| for NAMUR inputs | |
| — at “0” to “1”, max. | |
| — at “1” to “0”, max. | |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 600 m |
| Encoder | |
| Connectable encoders | |
| ● NAMUR encoder/changeover contact according to EN 60947 | |
| ● Single contact / changeover contact unconnected | |
| ● Single contact / changeover contact connected with 10 kΩ | |
| ● 2-wire sensor | Yes |
| — permissible quiescent current (2-wire sensor), max. | |
| Isochronous mode | |
| Filtering and processing time (TCI), min. | |
| Bus cycle time (TDP), min. | |
| Jitter, max. | |
| Interrupts/diagnostics/status information | |
| Diagnostics function | |
| Alarms | |
| ● Diagnostic alarm | No |
| ● Hardware interrupt | No |
| Diagnoses | |
| ● Diagnostic information readable | |
| ● Monitoring the supply voltage | No |
| — parameterizable | |
| ● Monitoring of encoder power supply | |
| ● Wire-break | No |
| ● Short-circuit | No |
| ● Group error | |
| Diagnostics indication LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | No |
| ● for module diagnostics | Yes; green/red DIAG LED |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | No |
| ● between the channels and backplane bus | Yes |
| ● between the channels and the power supply of the electronics | No |
| Isolation | |
| Isolation tested with | 2 545 V DC/2 s (routine test) |
| Standards, approvals, certificates | |
| Suitable for safety functions | No |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 2 000 m; On request: Installation altitudes greater than 2 000 m |
| Dimensions | |
| Width | 20 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weights | |
| Weight, approx. | 36 g |
Phân phối & báo giá 6ES7131-6FD01-0BB1
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7131-6FD01-0BB1 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Nhận thông báo qua Email
Mới nhất
