WinCC Sm@rtServer là tùy chọn cho SIMATIC WinCC Runtime Advanced với SIMATIC Panels để giao tiếp giữa các hệ thống SIMATIC HMI khác nhau. WinCC Sm@rtServer cung cấp giải pháp linh hoạt để truy cập từ xa vào HMI – xử lý các sự cố một cách nhanh chóng thông qua quyền truy cập từ xa vào máy móc / nhà máy cần bảo trì hay sửa chữa.

MESIDAS.COM chuyên cung cấp license (key/code) cấp phép/ kích hoạt bản quyền cho các phần mềm tự động hóa Siemens. Nếu bạn đang cần tư vấn, báo giá hay mua license SIMATIC WinCC Sm@rtServer thì hãy liên hệ với MESIDAS GROUP để được hỗ trợ một cách nhanh chóng, hiệu quả và tận tâm nhé.

Mục lục

Thông số kỹ thuật chung của WinCC Sm@rtServer

	The values specified are maximum values
Execution platform
SIMATIC Basic Panels 2^nd Generation	All devices with Ethernet interfaces
SIMATIC Comfort Panels	all
SIMATIC Panels	Mobile Panel 177 PN, Mobile Panel 277, TP/OP 177B PN/DP, TP/OP 277
SIMATIC Multi Panels	MP 177, MP 277, MP 377
PC systems	SIMATIC WinCC Runtime Advanced
Number of Sm@rtClients that can simultaneously connect to a Sm@rtServer
SIMATIC Basic Panels 2^nd Generation	1 client
Comfort Panel, Mobile Panel 2^nd Generation as Sm@rtServer	2 clients for 4″ devices 3 clients for 7″, 9″, 12″ and 15″ devices 2 clients for 19″ devices 1 client for 22″ devices
Mobile Panel 177 PN, TP/OP 177B PN/DP, MP 177 as Sm@rtServer	2 clients
Mobile Panel 277, TP/OP 277, MP 277 as Sm@rtServer	3 clients for 6″ devices 2 clients for 8″ and 10″ devices
MP 377 as Sm@rtServer	3 clients for 12″ devices 2 clients for 15″ devices 1 client for 19″ devices
WinCC Runtime Advanced as Sm@rtServer	5 clients

WinCC Sm@rtServer có sẵn những mã sản phẩm sau:

6AV2107-0CA00-0BB0

SIMATIC WinCC Sm@rtServer for Runtime Advanced Option for WinCC V11 – V14; V14 SP1 or higher integrated in WinCC; runtime software, single license without SW, without documentation License key on USB stick, Class A

6AV2107-0CA00-0BH

SIMATIC WinCC Sm@rtServer for Runtime Advanced option for WinCC V11 – V14; V14 SP1 or higher integrated in WinCC; license key download, single license for 1 installation R-SW, without software and documentation, class A. Email address required for delivery

6AV2107-0CP00-0BB0

SIMATIC WinCC SM@RT Server for SIMATIC Panels Option for WinCC V11, V12, V13; runtime software, single license without SW, without documentation License key on USB stick, Class A

6AV2107-0CP00-0BH0

SIMATIC WinCC SM@RT Server for SIMATIC Panels option for WinCC V11, V12, V13; license key download, single license for 1 installation R-SW, without software and documentation, class A. Email address required for delivery

6AV2107-0CR00-0BB0

SIMATIC WinCC Sm@rtServer for SIMATIC Basic Panels, option for WinCC as of V14; Runtime software in TIA Portal; Single License; Without software a. documentation; License key on USB flash drive; Class A. Content: 1x USB

6AV2107-0CR00-0BH0

SIMATIC WinCC Sm@rtServer for SIMATIC Basic Panels, option for WinCC ab V14: Runtime software in TIA Portal; Single License; license key for download; without software and documentation; class A. Email address required for delivery

Siemens giới thiệu về SIMATIC WinCC Sm@rtServer

Tổng quan về WinCC Sm@rtServer

Option for SIMATIC WinCC Runtime Advanced plus SIMATIC Panels for communication between various SIMATIC HMI systems.
Available for the following SIMATIC HMI systems:
- Basic Panels 2^nd Generation (with Ethernet interface)
- Comfort Panels
- Mobile Panel 2^nd Generation, Mobile Panel 277, Mobile Panel 177 PN
- TP 177B PN/DP, OP 177B PN/DP
- TP 277, OP 277
- MP 177, MP 277, MP 377
- WinCC Runtime Advanced
A SIMATIC HMI system can be used to control or monitor another system remotely; entry level for client/server configurations for distributed operator stations or for solutions with head end or control room
Local operation, visualization and data processing are as possible as plant-wide access to information. Integrated information flows ensure an overview of the status of all processes.
Licensing:
The “SIMATIC WinCC Sm@rtServer for Panel” or “SIMATIC WinCC Sm@rtServer for Basic Panel” or “SIMATIC WinCC Sm@rtServer for Runtime Advanced” license must be installed on the server operator panel.
A separate license is no longer required for Comfort / Mobile Panels Version V14 or higher and for Runtime Advanced Version V14 SP1 or higher.
A license is not required for the engineering system for configuring the runtime option.

Note:

When accessing the operator stations via the Sm@rtServer option, suitable protective measures (including IT security such as network segmentation) should be taken in order to ensure safe operation of the system.

Ứng dụng SIMATIC WinCC Sm@rtServer

Operator control and monitoring of machines covering large areas with several operator stations by one operator.
Operator control and monitoring of machine-level HMI systems from one central station (e.g. head-end station of a production line or from a control room)
Remote maintenance and servicing of machines/plants over the Internet/Intranet

Application of the Sm@rtClient concept: Coordinated operation of several operator stations

Use of the Sm@rtClient display: Operator control and monitoring of machine-level HMI systems from one central station

Remote operator control and monitoring of SIMATIC HMI systems using Industrial Ethernet and/or via the Intranet/Internet

Tính năng chính của WinCC Sm@rtServer

Coordinated operation of several operator stations:

The HMI application and communication with the controller takes place via the master station. “Sm@rtClients” can be activated from here in the case of machines/plants with larger dimensions which require a larger number of operator panels. The Sm@rtClients are then provided with access to the master station and thus to the process. Access procedures guarantee that only one operator system can actively access the process at any given time.
Embedded in process screens, a configurable screen object (Sm@rtClient display) represents the screen of the relevant HMI system (Sm@rtServer)
Powerful standard functions permit user-friendly and flexible operation of the display

Remote control of an operating station:

The HMI application and communication with the controller takes place via the HMI system. Using the Sm@rtServer, the HMI systems in the machines/systems can be serviced remotely. An access process ensures that only one operator (either locally at the machine or remotely via Internet Explorer) can actively access the process at one time.
Microsoft Internet Explorer V6.0 SP1 or higher is sufficient for accessing an HMI system.

0 0 votes

Article Rating