Switch công nghiệp 8-port + 3G SFP IEC 61850 Full Gigabit Managed HMG-838GEPI6Z1AD

Mô tả switch công nghiệp 8-port + 3G SFP IEC 61850 Full Gigabit Managed HMG-838GEPI6Z1AD.

Cung cấp các thiết bị chuyển mạch Gigabit Ethernet đạt chuẩn IEC 61850 & IEEE 1613, được thiết kế dành riêng cho các hệ thống trạm biến áp. Các thiết bị chuyển mạch switch công nghiệp chuẩn IEC 61850 & IEEE 1613 này được trang bị nguồn điện dự phòng và cách ly 24/48 VDC và 110/220 VDC/VAC với dải nhiệt độ hoạt động rộng -40~85°C

Mô tả switch công nghiệp HMG-838GEPI6Z1AD

Đặc trưng switch công nghiệp chuẩn IEC 61850

• Tuân thủ các tiêu chuẩn của IEEE
• Cung cấp nhiều cổng Gigabit TX với đầu nối RJ-45 và sự hỗ trợ của Green Ethernet IEEE802.3az EEE (Energy Efficient Ethernet)
• Cung cấp nhiều khe cắm Gigabit SFP với sự hỗ trợ của DDMI
• Hỗ trợ các giải pháp mạng dự phòng khác nhau như: Direct-Ring, Direct-Chain, Join-Ring, STP, RSTP, MSTP và ITU-T G.8032
• Công nghệ độc quyền cho tốc độ cực cao với thời gian phục hồi <10ms @250 thiết bị
• Hỗ trợ GOOSE Message tuân thủ tiêu chuẩn IEC61850
• Hỗ trợ IEEE1588 PTP V2 đồng bộ hóa thời gian chính xác, có thể hoạt động với Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave tùy theo từng cổng.
• Hỗ trợ các giải pháp bảo mật mạng khác nhau, Port và MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
• Hỗ trợ DHCP Server/Client/Relay/Snooping/ tùy chọn Snooping 82/ tùy chọn Relay 82
• Network traffic priority, QoS, Traffic classification QoS, CoS, bandwidth control for Ingress/Egress, broadcast storm control, DiffServ
• Hỗ trợ IEEE802.1Q VLAN, MAC-based VLAN, IP Subnet-based VLAN, Protocol-based VLAN, VLAN translation, GVRP/MVRP
• Hỗ trợ IGMP/MLD snooping V1/V2/V3, IGMP Filtering/Throttling, IGMP query, IGMP proxy reporting, MLD snooping
• Hỗ trợ Dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
• Hỗ trợ RMON, MIB II, Port mirroring, Syslog, IEEE802.1ab LLDP dành cho giám sát mạng
• Hỗ trợ IPv6 Telnet server, ICMPv6
• Hỗ trợ CLI, quản lý trên nền tảng Web, SNMP v1/v2c/v3, Telnet server dành cho quản lý
• Hỗ trợ nâng cấp phần mềm qua TFTP & HTTP

Nguồn cấp cho switch

• Nguồn cấp điện áp thấp 24/48/-48VDC hoặc nguồn cấp điện áp cao 110/220 VAC/VDC
• Hỗ trợ nguồn cấp điện áp âm qua cổng RS-232
• Bảo vệ cách ly 2.25K VDC Hi-pot cho cổng Ethernet và nguồn
• Bảo vệ chống phân cực ngược và bảo vệ quá tải

Chứng nhận thiết bị đạt chuẩn

• Chứng nhận IEC 61850-3, IEEE1613
• Chứng nhận UL60950-1, CE, FCC
• Chứng nhận EN 50121-4 cho Railway Applications (Track Side)
• Chứng nhận EN 61000-6-2 và EN 61000-6-4 được sử dụng trong môi trường công nghiệp nặng
• Thiết bị đạt chuẩn bảo vệ công nghiệp IP30
• Hỗ trợ phạm vi nhiệt độ hoạt động -40 to 80°C
• Dễ dàng lắp đặt trên các thanh ray DIN-Rail hoặc tùy chọn khác.

Datasheet HMG-838GEPI6Z1AD

Overview

Ethernet Direct pioneers in offering Utility-grade, fully managed Gigabit Ethernet switches specifically designed to operate reliably and safely in harsh environment found in electric utility
substations.

The HMG-838GEPI6Z1AD is an IEC-61850-3 and IEEE 1613 certified industrial Ethernet managed switch that comes with 8 x 10/100/1000Base-T(X) ports and 3 Gigabit/Fast Ethernet SFP ports that provides a high level of immunity to electromagnetic interference and heavy electrical surges to meet the demands of power substation systems. This powerful utility switch uses Made in the USA CPU platform for maximum hardware product reliability and has an operating temperature of -40 to 85°C. It is designed with redundant and isolated power supplies (24/48VDC or -48VDC) and (110/220VAC/VDC) to protect the substation system. In addition, the enhanced software features support a variety of Ethernet functions including STP/RSTP/MSTP/ITU-T G.8032 ERPS and multiple Direct-Ring for redundant cabling, IEEE 1588 PTP V2, layer 2 Ethernet IGMP, VLAN, Quality of Service, ACL, Security, IPv6, bandwidth control, port mirroring, cable diagnostic and Energy Efficient Ethernet.

Ethernet Direct smart grid technology products ensures “zero packet loss” and support GOOSE multicasts. The HMG-838GEPI6Z1AD is ideal for applications in distribution automation, substation automation, renewable power generation, thermal power generation, power grid interconnection, advance metering infrastructure and more.

Features

High Performance Network Switching Technology

• Complies with IEEE standards
• Provides 8 x 10/100/1000Base-T(X) with RJ-45 connector with supporting of Green
• Ethernet IEEE802.3az EEE (Energy Efficient Ethernet)
• Provides 3 x 100/1000Base SFP slots with supporting of DDMI
• Supports various network redundant solutions, including Direct-Ring, Direct-Chain, Join-Ring, STP, RSTP, MSTP and ITU-T G.8032
• Proprietary ultra high speed redundant technology with < 10ms recovery time @ 250
  devices
• Supports IEEE1588 PTP V2 (Hardware Time Stamp) for precise time synchronization, to
  operate in Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent
  Clock, Master, Slave mode by each port
• Supports various network security solutions, Port and MAC based IEEE802.1X, RADIUS,
  ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
• Supports DHCP Server/Client/Relay/Snooping/Snooping option 82/Relay option 82
• Network traffic priority, QoS, Traffic classification QoS, CoS, bandwidth control for Ingress/Egress, broadcast storm control, DiffServ
• Supports GOOSE Message
• Supports IEEE802.1Q VLAN, MAC-based VLAN, IP Subnet-based VLAN, Protocol-based
  VLAN, VLAN translation, GVRP/MVRP
• Supports IGMP/MLD snooping V1/V2/V3, IGMP Filtering/Throttling, IGMP query, IGMP
  proxy reporting, MLD snooping
• Supports dynamic IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
• Supports RMON, MIB II, Port mirroring, Syslog, IEEE802.1ab LLDP for network monitoring
• Supports IPv6 Telnet server, ICMPv6
• Supports CLI, Web based management, SNMP v1/v2c/v3, Telnet server for management
• Supports firmware upgrade via TFTP & HTTP with redundant firmware option

Reliable Power Design

• Supports 24 to 48VDC or -48VDC and 110/220VAC/VDC redundant power input
• Power reverse polarity protection and overload current protection

Robust Industrial Design

• IEC 61850-3 & IEEE 1613 certified for Power Substation
• EN 61000-6-2 and EN 61000-6-4 certified to use in heavy industrial environment
• EN 50121-4 certified for Railway Applications (Track Side)
• Robust industrial design case complies with IP30 housing standard
• Supports operating temperature -40 to 85 ^oC
• DIN-Rail or optional wall mounting installation

Hardware Specifications

Interface

• Total Ports: 11 ports
• RJ-45 Ports: 8 x 10/100/1000Base-T(X) auto-negotiation speed, Full/Half duplex, auto MDI/MDI-X
• Console Port: RS-232 (RJ-45 interface)
• Fiber Ports: 3 x 100/1000Base SFP slots
• LEDs: System: Power 1 (Green), Power 2 (Green), Power 3 (Green), Fault (Amber), CPU Act (Green), Ring Master (Yellow)
  Fiber Ports: Link/Active (Green)
  RJ-45 Ports: 10/100 Link/Active (Green), 1000 Link/Active (Amber)
• Alarm Contact: 1A@24VDC
• CPU Watchdog: Supported

Power Requirements

• Power Input: 24 to 48VDC (18 to 72VDC) or -48VDC;
  110/220VAC/VDC (85 to 264VAC) or (88 to 300VDC), redundant dual inputs
• Power Consumption: 24VDC/9.6W, 48VDC/11.1W, 110VAC/VDC/9.3W, 220VAC/VDC/9.2W
• Power Protection: Reverse polarity protection, overload current protection

Physical

• Dimensions: IP30 standard, 82mm (W) x 152mm (H) x 106mm (D)
• Installation: DIN-Rail or optional wall mounting

Environmental

• Operating Temperature: -40 to 85 ^oC
• Storage Temperature: -40 to 85 ^oC
• Operating Humidity: 5% to 95% RH (Non-condensing)

Technical

• Standard:
  • IEEE 802.3 10Base-T Ethernet
  • IEEE 802.3u 100Base-TX/100Base-FX
  • IEEE 802.3ab 1000Base-T
  • IEEE 802.3z Gigabit Fiber
  • IEEE 802.3x Flow Control
  • IEEE 802.3ad Port trunk with LACP
  • IEEE 802.3ac VLAN Tagging extension (Max. frame size extended to 1522 Bytes)
  • IEEE 802.3az EEE (Energy Efficient Ethernet)
  • IEEE 802.1D Spanning Tree
  • IEEE 802.1w Rapid Spanning Tree
  • IEEE 802.s Multiple Spanning Tree
  • IEEE 802.1p Class of Service
  • IEEE 802.1Q VLAN Tagging
  • IEEE 802.1X User Authentication (Radius)
  • IEEE 802.1AB LLDP
  • ITU-T G.8032 / Y.1344 ERPS (Ethernet Ring Protection Switching)
• Protocol Technology: CSMA/CD
• Switching Architecture: Store and Forward

Regulatory Approvals

• EMC: CE, EN 61000-6-2, EN 61000-6-4
• EMI: FCC Part 15 Subpart B Class A,CE EN55022 Class A
• EMS: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6,
  EN 61000-4-8,
• Safety: UL 60950-1
• Power Substation: IEC 61850-3 & IEEE 1613 (Certified)
• Railway Application (Track Side): EN 50121-4 (Certified)
• Vibration: IEC 60068-2-6
• Free Fall: IEC 60068-2-32
• Environmental: WEEE, RoHS
• MTBF: 143,943 hours based on Mil-Hdbk-217F, GB
• Warranty: 5 years

Software Specifications

Redundancy:

Direct-Ring, Direct-Chain, Join-Ring < 10ms recovery time,
(Each switch can configure up to 5 rings regardless of Direct-Ring, Direct-Chain, Join-Ring,
and each ring can contents 250 units of switches), supports loop protection
STP/RSTP/MSTP
ITU-T G.8032 / Y.1344 ERPS with < 50ms recovery time
(Single Ring, Sub-Ring, Multiple ring topology networks)
Link Aggregation: Static supports up to 5 trunk groups
Dynamic (IEEE 802.3ad LACP) supports up to 5 trunk groups

VLAN:

VID 1 to 4094
VLAN group up to 4094 groups
IEEE 802.1ad Q-in-Q
MAC-based VLAN (256 entries)
IP Subnet-based VLAN (128 entries)
Protocol-based VLAN (Ethernet, SNAP, LLC), (128 entries)
VLAN Translation (256 entries)
GVRP (GARP VLAN Registration Protocol)
MVR (Multicast VLAN Registration)

QoS:

Supports GOOSE Message, follow IEC 61850 standard to achieve zero packet loss
Port based and IEEE 802.1p based CoS
QoS determined by port, per port 8 active priorities queues
IP Precedence based Co, IP DSCP based CoS
DiffServ (RFC 2474) Remarking

Bandwidth Control:

Ingress/Egress

Storm Control:

Unicast, Broadcast, Multicast

IGMP/MLD Snooping:

IGMP Snooping v1/v2/v3, MLD Snooping v1/v2
Port Filtering Profile
Throttling, Fast Leave
Maximum Multicast Group: Up to 1022 entries
Query / Static Router Port

Security:

IEEE 802.1X (Port-based, MAC-based), RADIUS, TACACS+ 3.0
Supports ACL, no. of rules up to 256 entries

HTTP/HTTPS, SSL, SSH v2
Local Authentication
Remote Access Security: RADIUS, TACACS+
Management interface access filtering via Web, Telnet/SSH, CLI console

Management:

SNMP, Web, Telnet/SSH, CLI management
TFTP/HTTP backup/restore configurations
Firmware upgrade via TFTP/HTTP, supports dual firmware
RMON I (1, 2, 3, 9 group), RMON II
RFC1213 MIB II, Private MIB
Supports UPnP, IP Source Guard, Port Mirroring
Warning message sends to syslog, e-mail, alarm relay
DNS Client, Proxy
LLDP: LLDP-MED

System Log:

Supports local system log and remote Syslog server

DHCP:

Server, Client, Relay, Snooping
Snooping option 82, Relay option 82

Time Management:

IEEE1588 PTP V2 (Hardware Time Stamp): Ordinary-Boundary, Peer to Peer Transparent
Clock, End to End Transparent Clock, Master, Slave
NTP/SNTP Client

IPv6:

IPv6 Management Telnet Server/ICMP v6
SNMP over IPv6, HTTP over IPv6, SSH over IPv6, IPv6 Telnet, IPv6 NTP (Client), IPv6 SNTP
(Client), IPv6 TFTP, IPv6 QoS, IPv6 ACL (256 entries)

Green Ethernet:

Supports IEEE802.3az EEE (Energy Efficient Ethernet): Management to optimize the power
consumption
Determine the cable length and lowering the power for ports work with short cable
Lower the power for a port when there is no link
LED Power Management: Adjustment on LEDs intensity

Cable Diagnostic: (Copper ports only)

Shows physical status of the UTP cable, in order to get more accurate result the cable length
suggestion is 7-140 meters