6ES7521-1FH00-0AA0 SM 521 DI 16x230VAC BA SIMATIC S7-1500

5.002.000 

SIMATIC S7-1500, digital input module DI 16×230 V AC BA, 16 channels in groups of 4; Input delay 20 ms; Input type 1 (IEC 61131): Front connector (screw terminals or push-in) to be ordered separately.

Tải về datasheet (pdf): Tại đây!

6ES7521-1FH00-0AA0 là mô đun mở rộng tín hiệu ngõ vào số cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. 6ES7521-1FH00-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7521-1FH00-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

6ES7521-1FH00-0AA0

Bảng tóm tắt thông số kỹ thuật 6ES7521-1FH00-0AA0

SIMATIC S7-1500, digital input module DI 16×230 V AC BA, 16 channels in groups of 4; Input delay 20 ms; Input type 1 (IEC 61131): Front connector (screw terminals or push-in) to be ordered separately

Mã sản phẩm 6ES7521-1FH00-0AA0
Dòng sản phẩm SIMATIC S7-1500, SM 521
Hãng sản xuất SIEMENS
Số lượng đầu vào số 16 DI 230 V AC BA
Kích thước (RxCxS) 35x147x129 mm
Trọng lượng 300 g

Bảng chi tiết thông số kỹ thuật 6ES7521-1FH00-0AA0

Article number 6ES7521-1FH00-0AA0
S7-1500, DI 16x230VAC BA
General information
Product type designation DI 16x230VAC BA
HW functional status FS01
Firmware version
● FW update possible Yes
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
● Prioritized startup Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V12 / V12
● STEP 7 configurable/integrated from version V5.5 SP3 / –
● PROFIBUS from GSD version/GSD revision V1.0 / V5.1
● PROFINET from GSD version/GSD revision V2.3 / –
Operating mode
● DI Yes
● Counter No
● Oversampling
● MSI Yes
Supply voltage
Rated value (DC)
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
Input current
Current consumption, max.
Power
Power available from the backplane bus 1 W
Power loss
Power loss, typ. 4.9 W
Digital inputs
Number of digital inputs 16
Digital inputs, parameterizable No
Source/sink input P-reading
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input characteristic curve in accordance with IEC 61131, type 3
Digital input functions, parameterizable
● Gate start/stop
● Freely usable digital input
● Counter
— Number, max.
— Counting frequency, max.
— Counting width
— Counting direction up/down
Input voltage
● Rated value (DC)
— 24 V DC
● Rated value (AC) 230 V; 120/230 V AC, 50/60 Hz
● for signal “0” 0V AC to 40V AC
● for signal “1” 79V AC to 264V AC
Input current
● for signal “1”, typ. 11 mA; At 230 V AC and 5.5 mA at 120 V AC
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable No
— at “0” to “1”, min.
— at “0” to “1”, max. 25 ms
— at “1” to “0”, min.
— at “1” to “0”, max. 25 ms
for interrupt inputs
— parameterizable No
for technological functions
— parameterizable No
Cable length
● shielded, max. 1 000 m
● unshielded, max. 600 m
Encoder
Connectable encoders
● 2-wire sensor Yes
— permissible quiescent current (2-wire sensor), max. 2 mA
Isochronous mode
Filtering and processing time (TCI), min.
Bus cycle time (TDP), min.
Interrupts/diagnostics/status information
Diagnostics function No
Alarms
● Diagnostic alarm No
● Hardware interrupt No
Diagnoses
● Monitoring the supply voltage No
● Wire-break No
● Short-circuit No
Diagnostics indication LED
● RUN LED Yes; green LED
● ERROR LED Yes; red LED
● Monitoring of the supply voltage (PWR-LED) No
● Channel status display Yes; green LED
● for channel diagnostics No
● for module diagnostics Yes; red LED
Potential separation
Potential separation channels
● between the channels No
● between the channels, in groups of 4
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics
Permissible potential difference
between different circuits 250 V AC between the channels and the backplane bus; 500 V AC between the channels
Isolation
Isolation tested with 3 100 V DC
Standards, approvals, certificates
Suitable for safety functions No
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. 0 °C
● horizontal installation, max. 60 °C
● vertical installation, min. 0 °C
● vertical installation, max. 40 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.
Dimensions
Width 35 mm
Height 147 mm
Depth 129 mm
Weights
Weight, approx. 300 g

Nhà phân phối & báo giá 6ES7521-1FH00-0AA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7521-1FH00-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

5/5 - (1 bình chọn)
Trọng lượng 0,300 kg
Kích thước 3,5 × 14,7 × 12,9 cm
Nhận thông báo qua Email
Nhận thông báo cho
guest

Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x