6ES7322-1HF01-0AA0 là mô đun mở rộng đầu ra số cho PLC S7-300 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. 6ES7322-1HF01-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7322-1HF01-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7322-1HF01-0AA0
SIMATIC S7-300, Digital output SM 322, isolated, 8 DO (relay), 1x 20-pole, 24 V DC, 2 A or 230 V AC, 2A
Mã sản phẩm | 6ES7322-1HF01-0AA0 |
Dòng sản phẩm | SIMATIC S7-300, SM 322 |
Hãng sản xuất | SIEMENS |
Số lượng đầu ra số | 8DA, 24V DC/2A hoặc 230V AC/2A |
Nguồn cung cấp | 24 V DC |
Kích thước (RxCxS) | 40x125x120 mm |
Trọng lượng | 190 g |
Bảng chi tiết thông số kỹ thuật 6ES7322-1HF01-0AA0
Article number | 6ES7322-1HF01-0AA0 |
SM322, 8DA, 24V DC/2A or 230V AC/2A | |
Load voltage L+ | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | |
permissible range, upper limit (DC) | |
Load voltage L1 | |
Rated value (AC) | |
permissible range, lower limit (AC) | |
permissible range, upper limit (AC) | |
permissible frequency range, lower limit | |
permissible frequency range, upper limit | |
Input current | |
from supply voltage L+, max. | 160 mA |
from load voltage L1 (without load), max. | |
from backplane bus 5 V DC, max. | 40 mA |
Power loss | |
Power loss, typ. | 3.2 W |
Digital outputs | |
Number of digital outputs | 8; Relays |
Short-circuit protection | No |
Controlling a digital input | Yes |
Size of motor starters according to NEMA, max. | |
Zero-crossing switch | |
Switching capacity of the outputs | |
on lamp load, max. | 50 W |
Low energy/fluorescent lamps with electronic control gear | 10x 58 W |
Fluorescent tubes, conventionally compensated | 1x 58 W |
Fluorescent tubes, uncompensated | 10x 58 W |
Output voltage | |
for signal “1”, min. | |
Output current | |
for signal “1” rated value | 2 A |
for signal “1” permissible range for 0 to 40 °C, min. | |
for signal “1” permissible range for 0 to 40 °C, max. | |
for signal “1” permissible range for 40 to 60 °C, min. | |
for signal “1” permissible range for 40 to 60 °C, max. | |
for signal “1” minimum load current | 5 mA |
for signal “1” permissible surge current, max. | |
for signal “0” residual current, max. | |
Output delay with resistive load | |
“0” to “1”, max. | |
“1” to “0”, max. | |
Parallel switching of two outputs | |
for uprating | No |
for redundant control of a load | Yes |
Switching frequency | |
with resistive load, max. | 2 Hz |
with inductive load, max. | 0.5 Hz |
with inductive load (acc. to IEC 60947-5-1, AC15), max. | |
With inductive load (to IEC 60947-5-1, DC13/AC15), max. | 0.5 Hz |
on lamp load, max. | 2 Hz |
mechanical, max. | 10 Hz |
Total current of the outputs (per group) | |
horizontal installation | |
— up to 40 °C, max. | |
— up to 60 °C, max. | |
vertical installation | |
— up to 40 °C, max. | |
Relay outputs | |
Rated supply voltage of relay coil L+ (DC) | 24 V; 110 mA |
Contact connection (internal) | Yes; SIOV-CU4032 K275G |
Number of operating cycles, max. | 300 000; 230 V AC: 100 000; 120 V AC: 200 000; 24 V DC: 300 000 (at 2 A) |
Switching capacity of contacts | |
— with inductive load, max. | 2 A; 2 A (230 V AC), 2 A (24 V DC) |
— with resistive load, max. | 2 A |
— Thermal continuous current, max. | 3 A |
Cable length | |
shielded, max. | 1 000 m |
unshielded, max. | 600 m |
Interrupts/diagnostics/status information | |
Alarms | No |
Diagnostics function | No |
Alarms | |
Diagnostic alarm | No |
Diagnoses | |
Diagnostic information readable | |
Wire-break | No |
Short-circuit | No |
Fuse blown | No |
missing load voltage | No |
Diagnostics indication LED | |
Rated load voltage PWR (green) | No |
Fuse OK FSG (green) | No |
Group error SF (red) | |
Status indicator digital output (green) | Yes |
Potential separation | |
Potential separation digital outputs | |
between the channels | Yes |
between the channels, in groups of | 2 |
between the channels and backplane bus | Yes; Optocoupler |
Between the channels and the power supply of the relays | |
Isolation | |
Isolation tested with | 1 500 V AC |
Connection method | |
required front connector | 20-pin |
Dimensions | |
Width | 40 mm |
Height | 125 mm |
Depth | 120 mm |
Weights | |
Weight, approx. | 190 g |
Phân phối và báo giá 6ES7322-1HF01-0AA0
Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7322-1HF01-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.