6ES7322-1BP00-0AA0 SM 322 64DA 24VDC 0.3A SIMATIC S7-300

16.864.000 

SIMATIC S7-300 digital output SM 322, Isolated in groups of 16, 64DO, 24 V DC, 0.3A sink output Total current 2 A/group, 8 A/module Terminal blocks 6ES7392-1.N00-0AA0 and cable 6ES7392-4…0-0AA0 required.

Tải về datasheet (pdf): Tại đây!

6ES7322-1BP00-0AA0 là mô đun mở rộng đầu ra số cho PLC S7-300 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. 6ES7322-1BP00-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7322-1BP00-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

6ES7322-1BP00-0AA0

Bảng tóm tắt thông số kỹ thuật 6ES7322-1BP00-0AA0

SIMATIC S7-300 digital output SM 322, Isolated in groups of 16, 64DO, 24 V DC, 0.3A sink output Total current 2 A/group, 8 A/module Terminal blocks 6ES7392-1.N00-0AA0 and cable 6ES7392-4…0-0AA0 required

Mã sản phẩm 6ES7322-1BP00-0AA0
Dòng sản phẩm SIMATIC S7-300, SM 322
Hãng sản xuất SIEMENS
Số lượng đầu ra số 64DA, DC24V, 0,3A P-write
Nguồn cung cấp 24 V DC (20.4-28.8 V DC)
Kích thước (RxCxS) 40x125x112 mm
Trọng lượng 230 g

Bảng chi tiết thông số kỹ thuật 6ES7322-1BP00-0AA0

Article number 6ES7322-1BP00-0AA0
SM322 64DA, DC24V, 0,3A P-write
Load voltage L+
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Input current
from load voltage L+ (without load), max. 75 mA
from backplane bus 5 V DC, max. 100 mA
Power loss
Power loss, typ. 6 W
Digital outputs
Number of digital outputs 64
Short-circuit protection Yes; Electronic
Response threshold, typ. 0.7 to 1.9 A
Limitation of inductive shutdown voltage to L+ (-53 V)
Controlling a digital input Yes
Switching capacity of the outputs
on lamp load, max. 5 W
Load resistance range
lower limit 80 Ω
upper limit 10 kΩ
Output voltage
for signal “1”, min. L+ (-0.5 V)
Output current
for signal “1” rated value 0.3 A
for signal “1” permissible range, min. 2.4 mA
for signal “1” permissible range, max. 0.36 A
for signal “1” permissible range for 0 to 40 °C, min.
for signal “1” permissible range for 0 to 40 °C, max.
for signal “1” permissible range for 40 to 60 °C, min.
for signal “1” permissible range for 40 to 60 °C, max.
for signal “1” minimum load current
for signal “0” residual current, max. 0.1 mA
Output delay with resistive load
“0” to “1”, max. 550 µs
“1” to “0”, max. 550 µs
Parallel switching of two outputs
for uprating No
for redundant control of a load Yes
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 0.5 Hz
with inductive load (acc. to IEC 60947-5-1, DC13), max.
on lamp load, max. 10 Hz
Total current of the outputs (per group)
horizontal installation
— up to 40 °C, max. 1.6 A
— up to 60 °C, max. 1.2 A
vertical installation
— up to 40 °C, max. 1.6 A
Cable length
shielded, max. 1 000 m
unshielded, max. 600 m
Interrupts/diagnostics/status information
Alarms No
Diagnostics function No
Alarms
Diagnostic alarm No
Diagnoses
Diagnostic information readable No
Wire-break No
Short-circuit No
Fuse blown No
missing load voltage No
Diagnostics indication LED
Rated load voltage PWR (green)
Fuse OK FSG (green)
Group error SF (red)
Status indicator digital output (green)
Channel fault indicator F (red)
Potential separation
Potential separation digital outputs
between the channels No
between the channels, in groups of 16
between the channels and backplane bus Yes; Optocoupler
Isolation
Isolation tested with 500 V DC
Connection method
required front connector Cable: 6ES7392-4Bxx0-0AA0 terminal blocks: 6ES7392-1xN00-0AA0
Dimensions
Width 40 mm
Height 125 mm
Depth 112 mm
Weights
Weight, approx. 230 g

Phân phối và báo giá 6ES7322-1BP00-0AA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7322-1BP00-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

5/5 - (1 bình chọn)
Trọng lượng 0,230 kg
Kích thước 4 × 12,5 × 11,2 cm
Nhận thông báo qua Email
Nhận thông báo cho
guest

Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x