6ES7322-1FL00-0AA0 SM 322 32DO 120/230VAC 1A SIEMENS

Name: 6ES7322-1FL00-0AA0 SM 322 32DO 120/230VAC 1A SIEMENS
SKU: 6ES7322-1FL00-0AA0
Price: 17042000 VND
Availability: InStock

17.042.000 ₫

SIMATIC S7-300, Digital output SM 322, isolated, 32 DO, 120 V/230 V AC, 1 A, double-width, 2x 20-pole.

Tải về datasheet (pdf): Tại đây!

6ES7322-1FL00-0AA0 là mô đun mở rộng đầu ra số cho PLC S7-300 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. 6ES7322-1FL00-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7322-1FL00-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

6ES7322-1FL00-0AA0

Mục lục

Bảng tóm tắt thông số kỹ thuật 6ES7322-1FL00-0AA0

SIMATIC S7-300, Digital output SM 322, isolated, 32 DO, 120 V/230 V AC, 1 A, double-width, 2x 20-pole

Mã sản phẩm	6ES7322-1FL00-0AA0
Dòng sản phẩm	SIMATIC S7-300, SM 322
Hãng sản xuất	SIEMENS
Số lượng đầu ra số	32DO, 120/230V AC, 1A
Nguồn cung cấp	120 V; 120/230 V AC
Kích thước (RxCxS)	80x125x117 mm
Trọng lượng	500 g

Bảng chi tiết thông số kỹ thuật 6ES7322-1FL00-0AA0

Article number	6ES7322-1FL00-0AA0
	SM322, 32DO, 120/230V AC, 1A
Load voltage L+
Rated value (DC)
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Load voltage L1
Rated value (AC)	120 V; 120/230 V AC
permissible range, lower limit (AC)	79 V
permissible range, upper limit (AC)	264 V
permissible frequency range, lower limit	47 Hz
permissible frequency range, upper limit	63 Hz
Input current
from supply voltage L+, max.
from load voltage L1 (without load), max.	10 mA
from backplane bus 5 V DC, max.	190 mA
Power loss
Power loss, typ.	25 W
Digital outputs
Number of digital outputs	32
Short-circuit protection	No
Controlling a digital input	Yes
Size of motor starters according to NEMA, max.	Size 4 according to NEMA
Zero-crossing switch	Yes; Max. 60 V
Switching capacity of the outputs
on lamp load, max.	50 W
Low energy/fluorescent lamps with electronic control gear
Fluorescent tubes, conventionally compensated
Fluorescent tubes, uncompensated
Output voltage
for signal “1”, min.	L1 (-0.8 V)
Output current
for signal “1” rated value	1 A
for signal “1” permissible range for 0 to 40 °C, min.	10 mA
for signal “1” permissible range for 0 to 40 °C, max.	1 A
for signal “1” permissible range for 40 to 60 °C, min.	10 mA
for signal “1” permissible range for 40 to 60 °C, max.	1 A
for signal “1” minimum load current	10 mA
for signal “1” permissible surge current, max.	10 A; per group (for 2 AC cycles)
for signal “0” residual current, max.	2 mA
Output delay with resistive load
“0” to “1”, max.	1 AC cycle
“1” to “0”, max.	1 AC cycle
Parallel switching of two outputs
for uprating	No
for redundant control of a load	Yes; only outputs of the same group
Switching frequency
with resistive load, max.	10 Hz
with inductive load, max.	0.5 Hz
with inductive load (acc. to IEC 60947-5-1, AC15), max.	0.5 Hz
With inductive load (to IEC 60947-5-1, DC13/AC15), max.
on lamp load, max.	1 Hz
mechanical, max.
Total current of the outputs (per group)
horizontal installation
— up to 40 °C, max.	4 A
— up to 60 °C, max.	3 A
vertical installation
— up to 40 °C, max.	4 A
Relay outputs
Rated supply voltage of relay coil L+ (DC)
Contact connection (internal)
Number of operating cycles, max.
Switching capacity of contacts
— with inductive load, max.
— with resistive load, max.
— Thermal continuous current, max.
Cable length
shielded, max.	1 000 m
unshielded, max.	600 m
Interrupts/diagnostics/status information
Alarms	No
Diagnostics function	Yes; Fuse blown or load voltage missing
Alarms
Diagnostic alarm	No
Diagnoses
Diagnostic information readable
Wire-break
Short-circuit
Fuse blown
missing load voltage
Diagnostics indication LED
Rated load voltage PWR (green)
Fuse OK FSG (green)
Group error SF (red)	Yes
Status indicator digital output (green)	Yes; per channel
Potential separation
Potential separation digital outputs
between the channels	Yes
between the channels, in groups of	8
between the channels and backplane bus	Yes; Optocoupler
Between the channels and the power supply of the relays
Isolation
Isolation tested with	4 000 V DC
Connection method
required front connector	20-pin
Dimensions
Width	80 mm
Height	125 mm
Depth	117 mm
Weights
Weight, approx.	500 g

Phân phối và báo giá 6ES7322-1FL00-0AA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7322-1FL00-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.