6ES7307-1EA01-0AA0 là mô đun cấp nguồn cho PLC S7-300 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. 6ES7307-1EA01-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7307-1EA01-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7307-1EA01-0AA0
SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V/5 A DC
Mã sản phẩm | 6ES7307-1EA01-0AA0 |
Dòng sản phẩm | SIMATIC S7-300, PS 307 |
Hãng sản xuất | SIEMENS |
Nguồn cung cấp | 120/230 V AC |
Nguồn đầu ra | 24 V DC/ 5 A |
Kích thước (RxCxS) | 60x125x120 mm |
Trọng lượng | 600 g |
Bảng chi tiết thông số kỹ thuật 6ES7307-1EA01-0AA0
Article number | 6ES7307-1EA01-0AA0 |
Product | PS 307 |
Power supply, type | 24 V/5 A |
Input | |
Input | 1-phase AC |
Note | Automatic range selection |
supply voltage | |
1 at AC rated value | 120 V |
2 at AC rated value | 230 V |
at DC | |
input voltage | |
1 at AC | 85 … 132 V |
2 at AC | 170 … 264 V |
at DC | |
Wide-range input | No |
Overvoltage resistance | 2.3 × Vin rated, 1.3 ms |
Mains buffering | at Vin = 93/187 V |
Mains buffering at Iout rated, min. | 20 ms; at Vin = 93/187 V |
Rated line frequency 1 | 50 Hz |
Rated line frequency 2 | 60 Hz |
Rated line range | 47 … 63 Hz |
input current | |
at rated input voltage 120 V | 2.3 A |
at rated input voltage 230 V | 1.2 A |
at rated input voltage 24 V | |
at rated input voltage 110 V | |
Switch-on current limiting (+25 °C), max. | 20 A |
duration of inrush current limiting at 25 °C | |
maximum | 3 ms |
I²t, max. | 1.2 A²·s |
Built-in incoming fuse | T 3,15 A/250 V (not accessible) |
Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: from 6 A characteristic C |
Output | |
Output | Controlled, isolated DC voltage |
Rated voltage Vout DC | 24 V |
Total tolerance, static ± | 3 % |
Static mains compensation, approx. | 0.1 % |
Static load balancing, approx. | 0.5 % |
Residual ripple peak-peak, max. | 50 mV |
Residual ripple peak-peak, typ. | 10 mV |
Spikes peak-peak, max. (bandwidth: 20 MHz) | 150 mV |
Spikes peak-peak, typ. (bandwidth: 20 MHz) | 20 mV |
product function output voltage adjustable | No |
Output voltage setting | – |
Status display | Green LED for 24 V OK |
On/off behavior | No overshoot of Vout (soft start) |
Startup delay, max. | 2 s |
Voltage rise, typ. | 10 ms |
Rated current value Iout rated | 5 A |
Current range | 0 … 5 A |
Note | |
supplied active power typical | 120 W |
short-term overload current | |
on short-circuiting during the start-up typical | 20 A |
at short-circuit during operation typical | 20 A |
duration of overloading capability for excess current | |
on short-circuiting during the start-up | 100 ms |
at short-circuit during operation | 100 ms |
Parallel switching for enhanced performance | Yes |
Numbers of parallel switchable units for enhanced performance | |
Efficiency | |
Efficiency at Vout rated, Iout rated, approx. | 87 % |
Power loss at Vout rated, Iout rated, approx. | 18 W |
Closed-loop control | |
Dynamic mains compensation (Vin rated ±15 %), max. | 0.1 % |
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. | 1 % |
Load step setting time 50 to 100%, typ. | 0.3 ms |
Load step setting time 100 to 50%, typ. | 0.3 ms |
setting time maximum | |
Protection and monitoring | |
Output overvoltage protection | Additional control loop, shutdown at < 28.8 V, automatic restart |
Current limitation | 5.5 … 6.5 A |
property of the output short-circuit proof | Yes |
Short-circuit protection | Electronic shutdown, automatic restart |
enduring short circuit current RMS value | |
maximum | 7 A |
Overload/short-circuit indicator | |
Safety | |
Primary/secondary isolation | Yes |
galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
Protection class | Class I |
leakage current | |
maximum | 3.5 mA |
typical | 0.5 mA |
Degree of protection (EN 60529) | IP20 |
Approvals | |
CE mark | Yes |
UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289 |
Explosion protection | ATEX (EX) II 3G Ex nA II T4; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455 |
certificate of suitability NEC Class 2 | No |
FM approval | Class I, Div. 2, Group ABCD, T4 |
CB approval | No |
certificate of suitability EAC approval | Yes |
Marine approval | In S7-300 system |
EMC | |
Emitted interference | EN 55022 Class B |
Supply harmonics limitation | EN 61000-3-2 |
Noise immunity | EN 61000-6-2 |
environmental conditions | |
ambient temperature | |
during operation | 0 … 60 °C |
— Note | with natural convection |
during transport | -40 … +85 °C |
during storage | -40 … +85 °C |
Humidity class according to EN 60721 | Climate class 3K3, 5 … 95% no condensation |
Mechanics | |
Connection technology | screw-type terminals |
Connections | |
Supply input | L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded |
Output | L+, M: 3 screw terminals each for 0.5 … 2.5 mm² |
Auxiliary | – |
width of the enclosure | 60 mm |
height of the enclosure | 125 mm |
depth of the enclosure | 120 mm |
required spacing | |
top | 40 mm |
bottom | 40 mm |
left | 0 mm |
right | 0 mm |
Weight, approx. | 0.6 kg |
product feature of the enclosure housing can be lined up | Yes |
Installation | Can be mounted onto S7 rail |
mechanical accessories | Mounting adapter for standard mounting rail (6EP1971-1BA00) |
MTBF at 40 °C | 2 480 589 h |
other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
Phân phối và báo giá 6ES7307-1EA01-0AA0
Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7307-1EA01-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.