6EP3322-6SB10-0AY0 Module nguồn 15VDC/4A LOGO! POWER

Liên hệ

LOGO!POWER 15 V / 4 A Stabilized power supply input: 100-240 V AC output: DC 15 V / 4 A.

Tải về datasheet (pdf): Tại đây!

6EP3322-6SB10-0AY0 là module cấp nguồn cho LOGO! được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng LOGO!. 6EP3322-6SB10-0AY0 được MESIDAS.COM phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3322-6SB10-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Module nguồn 15VDC/4A LOGO! POWER 6EP3322-6SB10-0AY0

Bảng tóm tắt thông số kỹ thuật 6EP3322-6SB10-0AY0

LOGO!POWER 15 V / 4 A Stabilized power supply input: 100-240 V AC output: DC 15 V / 4 A

Mã sản phẩm 6EP3322-6SB10-0AY0
Dòng sản phẩm LOGO!POWER
Hãng sản xuất SIEMENS
Nguồn đầu vào 100-240 V AC hoặc 110-300 V DC
Nguồn đầu ra DC 15 V / 4 A
Kích thước (RxCxS) 54 x 90 x 53 mm
Trọng lượng 120 g

Bảng chi tiết thông số kỹ thuật 6EP3322-6SB10-0AY0

Article number 6EP3322-6SB10-0AY0
Product LOGO!Power
Power supply, type 15 V/4 A
Input
Input 1-phase AC or DC
Rated voltage value Vin rated 100 … 240 V
Voltage range AC 85 … 264 V
input voltage
● at DC 110 … 300 V
Wide-range input Yes
Overvoltage resistance 300 V AC for 1 s
Mains buffering at Vin = 187 V
Mains buffering at Iout rated, min. 40 ms; at Vin = 187 V
Rated line frequency 1 50 Hz
Rated line frequency 2 60 Hz
Rated line range 47 … 63 Hz
input current
● at rated input voltage 120 V 1.24 A
● at rated input voltage 230 V 0.68 A
Switch-on current limiting (+25 °C), max. 55 A
I²t, max. 3 A²·s
Built-in incoming fuse internal
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A characteristic B or from 6 A characteristic C
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 15 V
● output voltage at output 1 at DC rated value 15 V
Total tolerance, static ± 3 %
Static mains compensation, approx. 0.1 %
Static load balancing, approx. 0.1 %
Residual ripple peak-peak, max. 200 mV
Residual ripple peak-peak, typ. 30 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 300 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz) 50 mV
Adjustment range 10.5 … 16.1 V
product function output voltage adjustable Yes
Output voltage setting via potentiometer
Status display Green LED for output voltage OK
On/off behavior No overshoot of Vout (soft start)
Startup delay, max. 0.5 s
Voltage rise, typ. 100 ms
Rated current value Iout rated 4 A
Current range 0 … 4 A
● Note +55 … +70 °C: Derating 2%/K
supplied active power typical 60 W
Parallel switching for enhanced performance Yes
Numbers of parallel switchable units for enhanced performance 2
Efficiency
Efficiency at Vout rated, Iout rated, approx. 88.4 %
Power loss at Vout rated, Iout rated, approx. 8 W
power loss [W] during no-load operation maximum 0.3 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max. 0.2 %
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. 3 %
Load step setting time 10 to 90%, typ. 1 ms
Load step setting time 90 to 10%, typ. 1 ms
Protection and monitoring
Output overvoltage protection Yes, according to EN 60950-1
Current limitation, typ. 5 A
property of the output short-circuit proof Yes
Short-circuit protection Constant current characteristic
enduring short circuit current RMS value
● maximum 5 A
overcurrent overload capability in normal operation overload capability 150% Iout rated typ. 200 ms
Overload/short-circuit indicator
measuring point for output current 45 mV =^ 4 A
overcurrent overload capability when switching on 150% Iout rated typ. 200 ms
Safety
Primary/secondary isolation Yes
galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class Class II (without protective conductor)
Degree of protection (EN 60529) IP20
Approvals
CE mark Yes
UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950, CSA C22.2 No. 60950), File E151273, NEC class 2 (acc. to UL 1310)
Explosion protection ATEX (EX) II 3G Ex nA IIC T3; cULus Class I Div. 2 (ANSI/ISA-12.12.01, CSA C22.2 No. 213) Group ABCD, T4, File E488866
certificate of suitability NEC Class 2 Yes
FM approval Class I, Div. 2, Group ABCD, T4
CB approval Yes
certificate of suitability EAC approval Yes
Marine approval ABS, BV, DNV GL, LRS
EMC
Emitted interference EN 55022 Class B
Supply harmonics limitation not applicable
Noise immunity EN 61000-6-2
environmental conditions
ambient temperature
● during operation -25 … +70 °C
— Note with natural convection
● during transport -40 … +85 °C
● during storage -40 … +85 °C
Humidity class according to EN 60721 Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology screw-type terminals
Connections
● Supply input L, N: 1 screw terminal each for 0.5 … 2.5 mm2 single-core/finely stranded
● Output +, -: 1 screw terminal each for 0.5 … 2.5 mm²
● Auxiliary
width of the enclosure 54 mm
height of the enclosure 90 mm
depth of the enclosure 53 mm
required spacing
● top 20 mm
● bottom 20 mm
● left 0 mm
● right 0 mm
Weight, approx. 0.2 kg
product feature of the enclosure housing can be lined up Yes
Installation Snaps onto DIN rail EN 60715 35×7.5/15, direct mounting in different mounting positions
MTBF at 40 °C 2 566 680 h
other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP3322-6SB10-0AY0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3322-6SB10-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

5/5 - (1 bình chọn)
Nhận thông báo qua Email
Nhận thông báo cho
guest

Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x