6ES7307-1BA01-0AA0 PS 307 120/230VAC 24VDC/2A

Name: 6ES7307-1BA01-0AA0 PS 307 120/230VAC 24VDC/2A
SKU: 6ES7307-1BA01-0AA0
Price: 3443000 VND
Availability: InStock

3.443.000 ₫

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V DC/2 A.

Tải về datasheet (pdf): Tại đây!

6ES7307-1BA01-0AA0 là mô đun cấp nguồn cho PLC S7-300 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. 6ES7307-1BA01-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7307-1BA01-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

6ES7307-1BA01-0AA0

Mục lục

Bảng tóm tắt thông số kỹ thuật 6ES7307-1BA01-0AA0

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V DC/2 A

Mã sản phẩm	6ES7307-1BA01-0AA0
Dòng sản phẩm	SIMATIC S7-300, PS 307
Hãng sản xuất	SIEMENS
Nguồn cung cấp	120/230 V AC
Nguồn đầu ra	24 V DC/ 2 A
Kích thước (RxCxS)	40x125x120 mm
Trọng lượng	400 g

Bảng chi tiết thông số kỹ thuật 6ES7307-1BA01-0AA0

Article number	6ES7307-1BA01-0AA0
Product	PS 307
Power supply, type	24 V/2 A
Input
Input	1-phase AC
Note	Automatic range selection
supply voltage
1 at AC rated value	120 V
2 at AC rated value	230 V
at DC
input voltage
1 at AC	85 … 132 V
2 at AC	170 … 264 V
at DC
Wide-range input	No
Overvoltage resistance	2.3 × Vin rated, 1.3 ms
Mains buffering	at Vin = 93/187 V
Mains buffering at Iout rated, min.	20 ms; at Vin = 93/187 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
input current
at rated input voltage 120 V	0.9 A
at rated input voltage 230 V	0.5 A
at rated input voltage 24 V
at rated input voltage 110 V
Switch-on current limiting (+25 °C), max.	22 A
duration of inrush current limiting at 25 °C
maximum	3 ms
I²t, max.	1 A²·s
Built-in incoming fuse	T 1.6 A/250 V (not accessible)
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker: 3 A characteristic C
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	0.2 %
Residual ripple peak-peak, max.	50 mV
Residual ripple peak-peak, typ.	5 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	150 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)	20 mV
product function output voltage adjustable	No
Output voltage setting	–
Status display	Green LED for 24 V OK
On/off behavior	No overshoot of Vout (soft start)
Startup delay, max.	2 s
Voltage rise, typ.	10 ms
Rated current value Iout rated	2 A
Current range	0 … 2 A
Note
supplied active power typical	48 W
short-term overload current
on short-circuiting during the start-up typical	9 A
at short-circuit during operation typical	9 A
duration of overloading capability for excess current
on short-circuiting during the start-up	90 ms
at short-circuit during operation	90 ms
Parallel switching for enhanced performance	Yes
Numbers of parallel switchable units for enhanced performance	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	84 %
Power loss at Vout rated, Iout rated, approx.	9 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	0.8 %
Load step setting time 50 to 100%, typ.	0.5 ms
Load step setting time 100 to 50%, typ.	0.5 ms
setting time maximum	1 ms
Protection and monitoring
Output overvoltage protection	Additional control loop, shutdown at < 28.8 V, automatic restart
Current limitation	2.2 … 2.6 A
property of the output short-circuit proof	Yes
Short-circuit protection	Electronic shutdown, automatic restart
enduring short circuit current RMS value
maximum	2 A
Overload/short-circuit indicator	–
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I
leakage current
maximum	3.5 mA
typical	0.5 mA
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289
Explosion protection	ATEX (EX) II 3G Ex nA II T4; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455
certificate of suitability NEC Class 2	No
FM approval	Class I, Div. 2, Group ABCD, T4
CB approval	No
certificate of suitability EAC approval	Yes
Marine approval	In S7-300 system
EMC
Emitted interference	EN 55022 Class B
Supply harmonics limitation	not applicable
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
during operation	0 … 60 °C
— Note	with natural convection
during transport	-40 … +85 °C
during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	screw-type terminals
Connections
Supply input	L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded
Output	L+, M: 2 screw terminals each for 0.5 … 2.5 mm²
Auxiliary	–
width of the enclosure	40 mm
height of the enclosure	125 mm
depth of the enclosure	120 mm
required spacing
top	40 mm
bottom	40 mm
left	0 mm
right	0 mm
Weight, approx.	0.4 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Can be mounted onto S7 rail
mechanical accessories	Mounting adapter for standard mounting rail (6EP1971-1BA00)
MTBF at 40 °C	2 320 078 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối và báo giá 6ES7307-1BA01-0AA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7307-1BA01-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.