6ES7134-6TD00-0CA1 AI 4xI 2-wire HART SIMATIC ET 200SP

Name: 6ES7134-6TD00-0CA1 AI 4xI 2-wire HART SIMATIC ET 200SP
SKU: 6ES7134-6TD00-0CA1

Liên hệ

SIMATIC ET 200SP, analog HART input module, AI 4xI 2-wire HART High Feature suitable for BU type A0, A1, color code CC03, channel diagnostics, 16-bit, +/-0.3%.

Tải về datasheet (pdf): Tại đây!

Mô tả sản phẩm
Đánh giá (0)

6ES7134-6TD00-0CA1 là module mở rộng đầu vào tương tự (analog input module) được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7134-6TD00-0CA1 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-6TD00-0CA1 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Mục lục

Bảng tóm tắt thông số kỹ thuật 6ES7134-6TD00-0CA1

SIMATIC ET 200SP, analog HART input module, AI 4xI 2-wire HART High Feature suitable for BU type A0, A1, color code CC03, channel diagnostics, 16-bit, +/-0.3%,

Mã sản phẩm	6ES7134-6TD00-0CA1
Dòng sản phẩm	SIMATIC ET 200SP, AI 4xI 2-wire HART
Hãng sản xuất	SIEMENS
Số lượng đầu vào analog	AI 4xI 2-wire HART
Nguồn cung cấp	24 V DC (19.2 – 28.8 V DC)
Kích thước (RxCxS)	15 x 73 x 58 mm
Trọng lượng	31 g

Bảng chi tiết thông số kỹ thuật 6ES7134-6TD00-0CA1

Article number	6ES7134-6TD00-0CA1
	ET 200SP, AI 4XI 2-WIRE 4…20MA HART
General information
Product type designation	AI 4xI 2-wire HART
HW functional status
Firmware version
● FW update possible	Yes
usable BaseUnits	BU type A0, A1
Color code for module-specific color identification plate	CC03
Product function
● I&M data	Yes; I&M0 to I&M3
● Isochronous mode	No
● Measuring range scalable	No
● Scalable measured values
● Adjustment of measuring range
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	V13 SP1
● STEP 7 configurable/integrated from version	V5.5 SP4 and higher
● PCS 7 configurable/integrated from version	V8.1 SP1
● PROFIBUS from GSD version/GSD revision	GSD Revision 5
● PROFINET from GSD version/GSD revision	GSDML V2.3
Operating mode
● Oversampling	No
● MSI	No
CiR – Configuration in RUN
Reparameterization possible in RUN	Yes
Calibration possible in RUN	No
Supply voltage
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
Input current
Current consumption (rated value)
Current consumption, max.	25 mA; without sensor supply
24 V encoder supply
● 24 V	Yes
● Short-circuit protection	Yes
● Output current, max.	20 mA; max. 50 mA per channel for a duration < 10 s
Additional 24 V encoder supply
● Short-circuit protection
● Output current, max.
Power loss
Power loss, typ.	0.65 W; without sensor supply
Address area
Address space per module
● Address space per module, max.	8 byte; + 1 byte for QI information
● Address space per module with HART, max.	28 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding	Yes
● Mechanical coding element	Yes
● Type of mechanical coding element	Type A
Selection of BaseUnit for connection variants
● 2-wire connection
● 4-wire connection
Analog inputs
Number of analog inputs	4; Differential inputs
● For current measurement	4
● For voltage measurement
permissible input voltage for voltage input (destruction limit), max.
permissible input current for current input (destruction limit), max.	50 mA
Cycle time (all channels), min.
Analog input with oversampling
● Values per cycle, max.
● Resolution, min.
Standardization of measured values
Input ranges (rated values), voltages
● 0 to +10 V
— Input resistance (0 to 10 V)
● 1 V to 5 V
— Input resistance (1 V to 5 V)
● -10 V to +10 V
— Input resistance (-10 V to +10 V)
● -5 V to +5 V
— Input resistance (-5 V to +5 V)
Input ranges (rated values), currents
● 0 to 20 mA	No
— Input resistance (0 to 20 mA)
● -20 mA to +20 mA	No
— Input resistance (-20 mA to +20 mA)
● 4 mA to 20 mA	Yes; 15 bit + sign
— Input resistance (4 mA to 20 mA)	280 Ω; + approx. 0.35 V diode forward voltage
Cable length
● shielded, max.	800 m
Analog value generation for the inputs
Measurement principle	integrating (Sigma-Delta)
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.	16 bit
● Integration time, parameterizable	Yes; channel by channel
● Integration time (ms)
● Basic conversion time, including integration time (ms)
● Interference voltage suppression for interference frequency f1 in Hz	10 / 50 / 60 Hz
● Conversion time (per channel)
● Basic execution time of the module (all channels released)
Smoothing of measured values
● Number of smoothing levels	4; None; 4/8/16 times
● parameterizable	Yes
Encoder
Connection of signal encoders
● for voltage measurement	No
● for current measurement as 2-wire transducer	Yes
— Burden of 2-wire transmitter, max.
● for current measurement as 4-wire transducer
Errors/accuracies
Linearity error (relative to input range), (+/-)	0.01 %
Temperature error (relative to input range), (+/-)	0.005 %/K
Crosstalk between the inputs, min.	60 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)	0.05 %
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-)
● Current, relative to input range, (+/-)	0.5 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-)
● Current, relative to input range, (+/-)	0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min.	60 dB
● Common mode voltage, max.
● Common mode interference, min.
Isochronous mode
Filtering and processing time (TCI), min.
Bus cycle time (TDP), min.
Jitter, max.
Interrupts/diagnostics/status information
Diagnostics function	Yes
Alarms
● Diagnostic alarm	Yes
● Limit value alarm	Yes
Diagnoses
● Monitoring the supply voltage	Yes
● Wire-break	Yes; channel by channel
● Short-circuit	Yes; Channel-by-channel, short-circuit of the encoder supply to ground or of an input to the encoder supply
● Group error	Yes
● Overflow/underflow	Yes; channel by channel
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
● Channel status display	Yes; green LED
● for channel diagnostics	Yes; red LED
● for module diagnostics	Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels	No
● between the channels and backplane bus	Yes
● between the channels and the power supply of the electronics	No
Permissible potential difference
between the inputs (UCM)
Isolation
Isolation tested with	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	-30 °C
● horizontal installation, max.	60 °C
● vertical installation, min.	-30 °C
● vertical installation, max.	50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.	5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual
Dimensions
Width	15 mm
Height	73 mm
Depth	58 mm
Weights
Weight, approx.	31 g

Phân phối & báo giá 6ES7134-6TD00-0CA1

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-6TD00-0CA1 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.