6ES7134-6PA00-0CU0 AI Energy Meter 480 VAC/CT HF SIMATIC ET 200SP
Liên hệ
SIMATIC ET 200SP, Analog input module, AI Energy Meter 480V AC/CT HF for 1A/5A current transformer, class S power analyser, FITS TO BU-TYPE U0, channel diagnosis.
Tải về datasheet (pdf): Tại đây!
6ES7134-6PA00-0CU0 là module mở rộng đầu vào tương tự (analog input module) được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7134-6PA00-0CU0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-6PA00-0CU0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7134-6PA00-0CU0
SIMATIC ET 200SP, Analog input module, AI Energy Meter 480V AC/CT HF for 1A/5A current transformer, class S power analyser, FITS TO BU-TYPE U0, channel diagnosis
| Mã sản phẩm | 6ES7134-6PA00-0CU0 |
| Dòng sản phẩm | SIMATIC ET 200SP, AI Energy Meter 480 VAC/CT HF |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu vào analog | AI Energy Meter 480V AC/CT HF |
| Nguồn cung cấp | 24 V DC (19.2 – 28.8 V DC) |
| Kích thước (RxCxS) | 20 x 73 x 58 mm |
| Trọng lượng | 45 g |
Bảng chi tiết thông số kỹ thuật 6ES7134-6PA00-0CU0
| Article number | 6ES7134-6PA00-0CU0 |
| ET 200SP AI Energy Meter 480V AC/CT HF | |
| General information | |
| Product type designation | AI Energy Meter 480 VAC/CT HF |
| HW functional status | From FS02 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type U0 |
| Supported power supply systems | TT, TN, IT |
| Product function | |
| ● Voltage measurement | Yes |
| — without voltage transformer | Yes |
| — with voltage transformer | Yes |
| ● Current measurement | Yes |
| — without current transformer | No |
| — with current transformer | Yes; 1 A or 5 A current transformer |
| — With Rogowski coil | No |
| — With current-voltage-converter | No |
| ● Energy measurement | Yes |
| ● Frequency measurement | Yes |
| ● Power measurement | Yes |
| ● Active power measurement | Yes |
| ● Reactive power measurement | Yes |
| ● Power factor measurement | Yes |
| ● Active factor measurement | Yes |
| ● Reactive power compensation | Yes |
| ● Line analysis | Yes |
| — Monitoring of instantaneous and half-wave values | Yes |
| — THD measurement for current and voltage | Yes |
| — Harmonics for current and voltage | Yes |
| — Voltage dip (DIP) | Yes |
| — Voltage swell | Yes |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | STEP 7 V15 or higher |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 or higher |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | V2.3 |
| Operating mode | |
| ● Switching between operating modes in RUN | Yes; For module version 32 I/20 Q, it is possible to dynamically switch between 25 user data variants, 23 of which are pre-defined and 2 of which can be defined by the specific user |
| ● Cyclic measured value access | Yes |
| ● Acyclic measured value access | Yes |
| ● Fixed measured value sets | Yes |
| ● Freely definable measured value sets | Yes; For cyclic and acyclic measured value access |
| CiR – Configuration in RUN | |
| Reparameterization possible in RUN | Yes |
| Calibration possible in RUN | Yes |
| Installation type/mounting | |
| Mounting position | any |
| Supply voltage | |
| Design of the power supply | DC |
| Type of supply voltage | 24 V DC |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Input current | |
| Current consumption (rated value) | 12.5 mA |
| Current consumption, max. | 17 mA |
| Power loss | |
| Power loss, typ. | 1.4 W; 4x 5 A input current, 3x 230 V AC |
| Address area | |
| Address space per module | |
| ● Inputs | 256 byte |
| ● Outputs | 20 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| Selection of BaseUnit for connection variants | |
| ● 2-wire connection | BU type U0 |
| Time of day | |
| Operating hours counter | |
| ● present | Yes |
| Analog inputs | |
| Cycle time (all channels), typ. | 50 ms; Time for consistent update of all measured and calculated values (cyclic und acyclic data) |
| Cable length | |
| ● shielded, max. | 200 m |
| ● unshielded, max. | 200 m |
| Analog value generation for the inputs | |
| Sampling frequency, max. | 2 048 kHz |
| Interrupts/diagnostics/status information | |
| Alarms | |
| ● Diagnostic alarm | Yes |
| ● Limit value alarm | Yes |
| ● Hardware interrupt | Yes; Monitoring of up to 16 freely selectable process values (exceeding or undershooting of value) |
| Diagnoses | |
| ● Line quality | Yes |
| ● Supply voltage | Yes |
| ● Hardware interrupt lost | Yes |
| ● Parameter assignment error | Yes |
| ● Module fault | Yes |
| ● Channel not available | Yes |
| ● Overflow/underflow | Yes |
| ● Overload current | Yes |
| Diagnostics indication LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | Yes; red Fn LED |
| ● for module diagnostics | Yes; green/red DIAG LED |
| Integrated Functions | |
| Measuring functions | |
| ● Measuring procedure for voltage measurement | TRMS |
| ● Measuring procedure for current measurement | TRMS |
| ● Type of measured value acquisition | seamless |
| ● Curve shape of voltage | Sinusoidal or distorted |
| ● Buffering of measured variables | Yes |
| ● Parameter length | 128 byte |
| ● Bandwidth of measured value acquisition | 3.2 kHz; Harmonics: 63 / 50 Hz, 52 / 60 Hz |
| Measuring range | |
| — Frequency measurement, min. | 45 Hz |
| — Frequency measurement, max. | 65 Hz |
| Measuring inputs for voltage | |
| — Measurable line voltage between phase and neutral conductor | 300 V |
| — Measurable line voltage between the line conductors | 519 V |
| — Measurable line voltage between phase and neutral conductor, min. | 3 V |
| — Measurable line voltage between phase and neutral conductor, max. | 300 V |
| — Measurable line voltage between the line conductors, min. | 6 V |
| — Measurable line voltage between the line conductors, max. | 519 V |
| — Internal resistance line conductor and neutral conductor | 1.5 MΩ |
| — Power consumption per phase | 60 mW; 300 V AC |
| — Impulse voltage resistance 1,2/50µs | 2.5 kV |
| Measuring inputs for current | |
| — measurable relative current (AC), min. | 1 %; Relative to the secondary rated current 5 A |
| — measurable relative current (AC), max. | 100 %; Relative to the secondary rated current 5 A |
| — Continuous current with AC, maximum permissible | 5 A; 6 A permanent thermal overload |
| — Apparent power consumption per phase for measuring range 5 A | 0.6 V·A |
| — Rated value short-time withstand current restricted to 1 s | 100 A |
| — Input resistance measuring range 0 to 5 A | 25 mΩ; At the terminal |
| — Surge strength | 10 A; for 1 minute |
| — Zero point suppression | 0 … 20%, referred to the nominal current |
| Measuring inputs for current (Rog. or I/U converter) | |
| — Measurable current at AC, max. | |
| — Continuous voltage, maximum permissible | |
| — Rated value, short-time withstand voltage restricted to 1 s | |
| — Input resistance | |
| — Zero point suppression | |
| Accuracy class according to IEC 61557-12 | |
| — Measured variable apparent power | 0.5 |
| — Measured variable active power | 0.5 |
| — Measured variable power factor | 0.5 |
| — Measured variable active energy | 0.5 |
| — Measured variable phase angle | ±0.5 °; not covered by IEC 61557-12 |
| — Measured variable frequency | 0.05 |
| Accuracy class line analysis acc. to IEC 61000-4-30 | |
| — Measured variable voltage | Class S |
| — Measured variable current | Class S |
| — Measured variable frequency | Class S |
| — Measured variable voltage interruption | Class S |
| — Measured variable voltage dip and swell | Class S |
| — Measured variable harmonic voltage | Class S |
| — Measured variable harmonic current | Class S |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | No |
| ● between the channels and backplane bus | Yes |
| ● Between the channels and load voltage L+ | Yes; Including FE |
| Isolation | |
| Isolation tested with | Between channels and backplane bus, 24 V supply: Routine test, 1 920 V AC, 2 s; between backplane bus and 24 V supply: Type test, 707 V DC |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C; < 0 °C as of FS02 |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C; < 0 °C as of FS02 |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 3 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions | |
| Width | 20 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weights | |
| Weight, approx. | 45 g |
| Other | |
| Data for selecting a voltage transformer | |
| ● Secondary side, max. | 300 V |
| Data for selecting a current transformer | |
| ● Burden power current transformer x/1A, min. | As a function of cable length and cross section, see device manual |
| ● Burden power current transformer x/5A, min. | As a function of cable length and cross section, see device manual |
Phân phối & báo giá 6ES7134-6PA00-0CU0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7134-6PA00-0CU0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Nhận thông báo qua Email
Mới nhất
