6ES7132-6FD00-2BB1 là module mở rộng đầu ra số (digital output module) cho CPU ET200SP được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7132-6FD00-2BB1 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6FD00-2BB1 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7132-6FD00-2BB1
SIMATIC ET 200SP, digital output module, DQ 4x 24..230V AC/2A Standard Pack quantity: 10 units, suitable for BU type B1, Color code CC41, Module diagnostics
Mã sản phẩm | 6ES7132-6FD00-2BB1 |
Dòng sản phẩm | SIMATIC ET 200SP, DQ 4 x 24 … 230 V AC/2 A ST |
Hãng sản xuất | SIEMENS |
Số lượng đầu ra số | DQ 4x 24..230V AC/2A |
Nguồn cung cấp | 230 V AC (20.4 – 264 V AC) |
Kích thước (RxCxS) | 20 x 73 x 58 mm |
Trọng lượng | 50 g |
Bảng chi tiết thông số kỹ thuật 6ES7132-6FD00-2BB1
General information | |
Product type designation | DQ 4×24 … 230 V AC/2 A ST |
HW functional status | From FS05 |
Firmware version | |
● FW update possible | Yes |
usable BaseUnits | BU type B1 |
Color code for module-specific color identification plate | CC41 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Isochronous mode | No |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated from version | V13 / V13 |
● STEP 7 configurable/integrated from version | V5.5 SP3 / – |
● PROFIBUS from GSD version/GSD revision | GSD Revision 5 |
● PROFINET from GSD version/GSD revision | GSDML V2.3 |
Operating mode | |
● DQ | Yes |
● DQ with energy-saving function | No |
● PWM | No |
● Oversampling | No |
● MSO | No |
Supply voltage | |
Rated value (AC) | 230 V |
permissible range, lower limit (AC) | 20.4 V |
permissible range, upper limit (AC) | 264 V |
Input current | |
Current consumption (rated value) | 11.5 mA |
Output voltage | |
Rated value (AC) | 230 V; 24V AC to 230V AC |
Power loss | |
Power loss, typ. | 9 W; Active power, load voltage 230 V, all outputs loaded with 2 A, 50 Hz |
Address area | |
Address space per module | |
● Address space per module, max. | 1 byte; + 1 byte for QI information |
● Inputs | 1 byte; With QI |
● Outputs | 1 byte |
Hardware configuration | |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type B1 |
● 2-wire connection | BU type B1 |
● 3-wire connection | BU type B1 |
● 4-wire connection | BU type B1 + potential distributor module |
Digital outputs | |
Type of digital output | Triac with zero point detection |
Number of digital outputs | 4 |
Current-sinking | No |
Current-sourcing | Yes |
Digital outputs, parameterizable | No |
Short-circuit protection | No; When using BU type B1, a miniature, quick-response fuse with 10 A tripping current must be provided |
Controlling a digital input | Yes |
Switching capacity of the outputs | |
● with resistive load, max. | 2 A |
● on lamp load, max. | 100 W |
Output voltage | |
● for signal “1”, min. | 20.4 V |
Output current | |
● for signal “1” rated value | 2 A |
● for signal “1” permissible range, min. | 10 mA |
● for signal “1” permissible range, max. | 2 A |
● for signal “0” residual current, max. | 460 µA |
Output delay with resistive load | |
● “0” to “1”, max. | 10 ms |
● “1” to “0”, max. | 10 ms |
Parallel switching of two outputs | |
● for logic links | No |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 10 Hz |
● with inductive load, max. | 0.5 Hz; Higher frequencies are possible, see Equipment Manual / Product Information |
● on lamp load, max. | 1 Hz |
Total current of the outputs | |
● Current per channel, max. | 2 A |
● Current per module, max. | 8 A |
Total current of the outputs (per module) | |
horizontal installation | |
— up to 40 °C, max. | 8 A |
— up to 50 °C, max. | 6 A |
— up to 60 °C, max. | 4 A |
vertical installation | |
— up to 30 °C, max. | 8 A |
— up to 40 °C, max. | 6 A |
— up to 50 °C, max. | 4 A |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Interrupts/diagnostics/status information | |
Diagnostics function | No |
Substitute values connectable | Yes |
Alarms | |
● Diagnostic alarm | No |
Diagnoses | |
● Monitoring the supply voltage | No |
● Wire-break | No |
● Short-circuit | No |
● Group error | Yes |
Diagnostics indication LED | |
● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
● Channel status display | Yes; green LED |
● for channel diagnostics | No |
● for module diagnostics | Yes; green/red DIAG LED |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● between the channels and the power supply of the electronics | No |
Isolation | |
Isolation tested with | 2 545 V DC/2 s (routine test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C |
● vertical installation, max. | 60 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 2 000 m; On request: Installation altitudes greater than 2 000 m |
Dimensions | |
Width | 20 mm |
Height | 73 mm |
Depth | 58 mm |
Weights | |
Weight, approx. | 50 g |
Phân phối & báo giá 6ES7132-6FD00-2BB1
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6FD00-2BB1 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.