6ES7132-6BF00-0CA0 DQ 8×24 VDC/0.5A HF SIMATIC ET 200SP
Liên hệ
SIMATIC ET 200SP, digital output module, DQ 8x 24VDC/0.5A High Feature, source output PNP, source output, Packing unit: 1 unit, suitable for BU type A0, color code CC02, Channel diagnostics for: Short-circuit and wire break; supply voltage, channel fault LED.
Tải về datasheet (pdf): Tại đây!
6ES7132-6BF00-0CA0 là module mở rộng đầu ra số (digital output module) cho CPU ET200SP được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7132-6BF00-0CA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6BF00-0CA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7132-6BF00-0CA0
SIMATIC ET 200SP, digital output module, DQ 8x 24VDC/0.5A High Feature, source output PNP, source output, Packing unit: 1 unit, suitable for BU type A0, color code CC02, Channel diagnostics for: Short-circuit and wire break; supply voltage, channel fault LED
| Mã sản phẩm | 6ES7132-6BF00-0CA0 |
| Dòng sản phẩm | SIMATIC ET 200SP, DQ 8×24 V DC/0.5 A HF |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu ra số | DQ 8x 24VDC/0.5A |
| Nguồn cung cấp | 24 V DC (19.2 – 28.8 V DC) |
| Kích thước (RxCxS) | 15 x 73 x 58 mm |
| Trọng lượng | 30 g |
Bảng chi tiết thông số kỹ thuật 6ES7132-6BF00-0CA0
| Article number | 6ES7132-6BF00-0CA0 |
| ET 200SP, DQ 8x24VDC/0,5A HF, PU 1 | |
| General information | |
| Product type designation | DQ 8×24 V DC/0.5 A HF |
| HW functional status | From FS07 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type A0 |
| Color code for module-specific color identification plate | CC02 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | Yes |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V13 SP1 / – |
| ● STEP 7 configurable/integrated from version | V5.5 / – |
| ● PCS 7 configurable/integrated from version | V8.1 SP1 |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● DQ | Yes |
| ● DQ with energy-saving function | No |
| ● PWM | No |
| ● Cam control (switching at comparison values) | |
| ● Oversampling | No |
| ● MSO | Yes |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Rated value (AC) | |
| permissible range, lower limit (AC) | |
| permissible range, upper limit (AC) | |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption (rated value) | |
| Current consumption, max. | |
| Output voltage | |
| Rated value (DC) | 24 V |
| Rated value (AC) | |
| Power loss | |
| Power loss, typ. | 1 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 8 byte; 2 channels per submodule + QI information |
| ● Inputs | |
| ● Outputs | |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | Type A |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type A0 |
| ● 2-wire connection | BU type A0 |
| ● 3-wire connection | BU type A0 with AUX terminals or potential distributor module |
| ● 4-wire connection | BU type A0 + Potential distributor module |
| Digital outputs | |
| Type of digital output | Source output (PNP, current-sourcing) |
| Number of digital outputs | 8 |
| Current-sinking | No |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | Yes |
| ● Response threshold, typ. | 0.7 to 1.3 A |
| Limitation of inductive shutdown voltage to | Typ. L+ (-50 V) |
| Controlling a digital input | Yes |
| Digital output functions, parameterizable | |
| ● Switching tripped by comparison values | |
| — Number of cam tracks, max. | |
| — Number of cams per module, max. | |
| — Number of cams per track, max. | |
| — Supported axis types | |
| — Hysteresis | |
| — Pulsed cam output | |
| — Range of values for comparison values, max. | |
| ● Freely usable digital output | |
| ● PWM output | |
| — Number, max. | |
| — Cycle duration, parameterizable | |
| — Resolution of the duty cycle | |
| ● Digital output with oversampling | |
| — Number, max. | |
| — Values per cycle, max. | |
| — Resolution, min. | |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 0.5 A |
| ● on lamp load, max. | 5 W |
| Load resistance range | |
| ● lower limit | 48 Ω |
| ● upper limit | 12 kΩ |
| Output voltage | |
| ● for signal “1”, min. | |
| Output current | |
| ● for signal “1” rated value | 0.5 A |
| ● for signal “1” permissible range, min. | |
| ● for signal “1” permissible range, max. | |
| ● for signal “0” residual current, max. | 0.1 mA |
| Output delay with resistive load | |
| ● “0” to “1”, typ. | 50 µs |
| ● “0” to “1”, max. | |
| ● “1” to “0”, typ. | 100 µs |
| ● “1” to “0”, max. | |
| Parallel switching of two outputs | |
| ● for logic links | |
| ● for uprating | No |
| ● for redundant control of a load | Yes |
| Switching frequency | |
| ● with resistive load, max. | 100 Hz |
| ● with inductive load, max. | 2 Hz |
| ● on lamp load, max. | 10 Hz |
| Total current of the outputs | |
| ● Current per channel, max. | 0.5 A |
| ● Current per module, max. | 4 A |
| Total current of the outputs (per module) | |
| horizontal installation | |
| — up to 30 °C, max. | |
| — up to 40 °C, max. | |
| — up to 50 °C, max. | |
| — up to 60 °C, max. | 4 A |
| vertical installation | |
| — up to 30 °C, max. | |
| — up to 40 °C, max. | |
| — up to 50 °C, max. | 4 A |
| — up to 60 °C, max. | |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 600 m |
| Isochronous mode | |
| Execution and activation time (TCO), min. | 48 µs |
| Bus cycle time (TDP), min. | 500 µs |
| Jitter, max. | |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
| ● Diagnostic information readable | |
| ● Monitoring the supply voltage | Yes |
| ● Wire-break | Yes; channel by channel |
| ● Short-circuit | Yes; channel by channel |
| ● Group error | Yes |
| Diagnostics indication LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | Yes; red LED |
| ● for module diagnostics | Yes; green/red DIAG LED |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | No |
| ● between the channels and backplane bus | Yes |
| ● between the channels and the power supply of the electronics | No |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Standards, approvals, certificates | |
| Suitable for safety functions | No |
| Suitable for safety-related tripping of standard modules | Yes; From FS02 |
| Highest safety class achievable in safety mode | |
| ● Performance level according to ISO 13849-1 | PL d |
| ● SIL acc. to IEC 61508 | SIL 2 |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C; < 0 °C as of FS07 |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C; < 0 °C as of FS07 |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions | |
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weights | |
| Weight, approx. | 30 g |
Phân phối & báo giá 6ES7132-6BF00-0CA0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6BF00-0CA0 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Nhận thông báo qua Email
Mới nhất
