6EP3337-8SB00-0AY0 Bộ nguồn 24VDC/40A (120/230VAC) SITOP PSU8200

Name: Bộ nguồn 24VDC/40A (120/230VAC) SITOP PSU8200 6EP3337-8SB00-0AY0
SKU: 6EP3337-8SB00-0AY0

Liên hệ

SITOP PSU8200 24 V/40 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/40 A.

Tải về datasheet (pdf): Tại đây!

6EP3337-8SB00-0AY0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP3337-8SB00-0AY0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3337-8SB00-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bộ nguồn 24VDC/40A (120/230VAC) SITOP PSU8200 6EP3337-8SB00-0AY0

Mục lục

Bảng tóm tắt thông số kỹ thuật 6EP3337-8SB00-0AY0

SITOP PSU8200 24 V/40 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/40 A

Mã sản phẩm	6EP3337-8SB00-0AY0
Dòng sản phẩm	SITOP PSU8200
Hãng sản xuất	SIEMENS
Nguồn đầu vào	120/230 V AC
Nguồn đầu ra	24 V DC/40 A
Kích thước (RxCxS)	145 x 145 x 150 mm
Trọng lượng	3 100 g

Bảng chi tiết thông số kỹ thuật 6EP3337-8SB00-0AY0

Article number	6EP3337-8SB00-0AY0
Product	SITOP PSU8200
Power supply, type	24 V/40 A
Input
Input	1-phase and 2-phase AC
Rated voltage value Vin rated
Voltage range AC
● Note	Automatic selection; startup starting from Ue ≥ 90/180 V
supply voltage
● 1 at AC rated value	120 V
● 2 at AC rated value	230 V
● at DC
input voltage
● 1 at AC	85 … 132 V
● 2 at AC	170 … 264 V
● at DC
Wide-range input	No
Mains buffering	at Vin = 230 V
Mains buffering at Iout rated, min.	25 ms; at Vin = 230 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	45 … 65 Hz
input current
● at rated input voltage 120 V	15 A
● at rated input voltage 230 V	9 A
Switch-on current limiting (+25 °C), max.	50 A
I²t, max.	8 A²·s
Built-in incoming fuse	Yes
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker at 1-phase operation: 16 A characteristic C; required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2421-4BA10 (120 V) or 3RV2411-1JA10 (230 V)
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V

● output voltage at output 1 at DC rated value	24 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	0.1 %
Residual ripple peak-peak, max.	100 mV
Residual ripple peak-peak, typ.	50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	240 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)	220 mV
Adjustment range	24 … 28 V
product function output voltage adjustable	Yes
Output voltage setting	via potentiometer; max. 960 W
Status display	Green LED for 24 V OK; LED yellow for overload; LED red for short-circuit or latching shutdown
Signaling	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK”
On/off behavior	Overshoot of Vout approx. 3 %
Startup delay, max.	1.5 s
Voltage rise, typ.	30 ms
Rated current value Iout rated	40 A
Current range	0 … 40 A
● Note	+60 … +70 °C: Derating 3%/K
supplied active power typical	960 W
short-term overload current
● on short-circuiting during the start-up typical	120 A
● at short-circuit during operation typical	120 A
duration of overloading capability for excess current
● on short-circuiting during the start-up	25 ms
● at short-circuit during operation	25 ms
constant overload current
● on short-circuiting during the start-up typical	60 A
Parallel switching for enhanced performance	Yes; switchable characteristic
Numbers of parallel switchable units for enhanced performance	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	92 %
Power loss at Vout rated, Iout rated, approx.	82 W
power loss [W] during no-load operation maximum	6.8 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	1.9 %
Load step setting time 50 to 100%, typ.	2 ms
Load step setting time 100 to 50%, typ.	2 ms
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.	3.8 %
Load step setting time 10 to 90%, typ.	1 ms
Load step setting time 90 to 10%, typ.	1 ms
setting time maximum	1 ms
Protection and monitoring
Output overvoltage protection	< 32 V
Current limitation, typ.	41 A
property of the output short-circuit proof	Yes
Short-circuit protection	Alternatively, constant current characteristic approx. 41 A or latching shutdown
enduring short circuit current RMS value
● typical	41 A
overcurrent overload capability in normal operation	250% Iout rated up to 25 ms, 150% Iout rated up to 5 s/min
Overload/short-circuit indicator	LED yellow for “overload”, LED red for “latching shutdown” or “short-circuit”
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I
leakage current
● maximum	0.1 mA
● typical	0.1 mA
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Explosion protection	IECEx Ex nA nC IIC T3 Gc; ATEX (EX) II 3G Ex nA nC IIC T3; cULus (Hazloc) Class I, Div. 2, Group ABCD, T3; File E330455
certificate of suitability NEC Class 2	No
FM approval	–
CB approval	Yes
certificate of suitability EAC approval	Yes
Marine approval	ABS, DNV GL
EMC
Emitted interference	EN 55022 Class B
Supply harmonics limitation	–
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	-25 … +70 °C
— Note	with natural convection
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	screw-type terminals
Connections
● Supply input	L, N, PE: 1 screw terminal each for 0.2 … 4 mm² single-core/finely stranded
● Output	+, -: 2 screw terminals each for 0.5 … 10 mm²
● Auxiliary	13, 14 (alarm signal): 1 screw terminal each for 0.14 … 1.5 mm²
width of the enclosure	145 mm
height of the enclosure	145 mm
depth of the enclosure	150 mm
required spacing
● top	40 mm
● bottom	40 mm
● left	0 mm
● right	0 mm
Weight, approx.	3.1 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Snaps onto DIN rail EN 60715 35×15
electrical accessories	Buffer module, redundancy module
mechanical accessories	Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20
MTBF at 40 °C	838 156 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP3337-8SB00-0AY0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3337-8SB00-0AY0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.