6EP1437-2BA20 Bộ nguồn 24VDC/40A (400-500VAC) SITOP PSU300S

Name: Bộ nguồn 24VDC/40A (400-500VAC) SITOP PSU300S 6EP1437-2BA20
SKU: 6EP1437-2BA20

Liên hệ

SITOP PSU300S 40A Stabilized power supply input: 3 AC 400-500 V output: 24 V DC/40 A.

Tải về datasheet (pdf): Tại đây!

6EP1437-2BA20 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP1437-2BA20 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1437-2BA20 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bộ nguồn 24VDC/40A (400-500VAC) SITOP PSU300S 6EP1437-2BA20

Mục lục

Bảng tóm tắt thông số kỹ thuật 6EP1437-2BA20

SITOP PSU300S 40A Stabilized power supply input: 3 AC 400-500 V output: 24 V DC/40 A

Mã sản phẩm	6EP1437-2BA20
Dòng sản phẩm	SITOP PSU300S
Hãng sản xuất	SIEMENS
Nguồn đầu vào	3 AC 400-500 V
Nguồn đầu ra	24 V DC/40 A
Kích thước (RxCxS)	145 x 145 x 150 mm
Trọng lượng	3 100 g

Bảng chi tiết thông số kỹ thuật 6EP1437-2BA20

Article number	6EP1437-2BA20
Product	SITOP PSU300S
Power supply, type	24 V/40 A
Input
Input	3-phase AC
Rated voltage value Vin rated	400 … 500 V
Voltage range AC	340 … 550 V
Wide-range input	Yes
Mains buffering	at Vin = 400 V
Mains buffering at Iout rated, min.	6 ms; at Vin = 400 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
input current
● at rated input voltage 400 V	2 A
● at rated input voltage 500 V	1.7 A
Switch-on current limiting (+25 °C), max.	60 A
I²t, max.	3.4 A²·s
Built-in incoming fuse	none
Protection in the mains power input (IEC 898)	Required: 3-pole connected miniature circuit breaker 10 … 16 A characteristic C or circuit breaker 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489-listed, DIVQ)
Output
Output	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V

● output voltage at output 1 at DC rated value	24 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	1 %
Static load balancing, approx.	2 %
Residual ripple peak-peak, max.	150 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	240 mV
Adjustment range	24 … 28 V
product function output voltage adjustable	Yes
Output voltage setting	via potentiometer; max. 960 W
Status display	Green LED for 24 V OK
Signaling	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for “24 V OK”
On/off behavior	No overshoot of Vout (soft start)
Startup delay, max.	1.5 s
Voltage rise, typ.	15 ms
voltage increase time of the output voltage maximum	500 ms
Rated current value Iout rated	40 A
Current range	0 … 40 A
● Note	48 A up to +45°C; +60 … +70 °C: Derating 3%/K
supplied active power typical	960 W
short-term overload current
● on short-circuiting during the start-up typical	65 A
● at short-circuit during operation typical	65 A
duration of overloading capability for excess current
● on short-circuiting during the start-up	100 ms
● at short-circuit during operation	100 ms
Parallel switching for enhanced performance	Yes
Numbers of parallel switchable units for enhanced performance	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	91.5 %
Power loss at Vout rated, Iout rated, approx.	89 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	3 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	1.5 %
Load step setting time 50 to 100%, typ.	1 ms
Load step setting time 100 to 50%, typ.	1 ms
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.	3 %
Load step setting time 10 to 90%, typ.	1 ms
Load step setting time 90 to 10%, typ.	1 ms
setting time maximum	10 ms
Protection and monitoring
Output overvoltage protection	protection against overvoltage in case of internal fault Vout < 35 V
Current limitation, typ.	50 A
property of the output short-circuit proof	Yes
Short-circuit protection	Electronic shutdown, automatic restart
enduring short circuit current RMS value
● maximum	14 A
overcurrent overload capability in normal operation	overload capability 150 % Iout rated up to 5 s/min
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178, transformer acc. to EN 61558-2-16
Protection class	Class I
leakage current
● maximum
● typical
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Explosion protection	IECEx Ex nA nC IIC T3 Gc; ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3
certificate of suitability NEC Class 2	No
FM approval	–
CB approval	Yes
certificate of suitability EAC approval	Yes
Marine approval	ABS, DNV GL
EMC
Emitted interference	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	-25 … +70 °C
— Note	with natural convection
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	screw-type terminals
Connections
● Supply input	L1, L2, L3, PE: 1 screw terminal each for 0.5 … 4 mm² single-core/finely stranded
● Output	+, -: 2 screw terminals each for 0.5 … 10 mm²
● Auxiliary	13, 14 (alarm signal): 1 screw terminal each for 0.05 … 2.5 mm²
width of the enclosure	145 mm
height of the enclosure	145 mm
depth of the enclosure	150 mm
required spacing
● top	40 mm
● bottom	40 mm
● left	0 mm
● right	0 mm
Weight, approx.	3.1 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Snaps onto DIN rail EN 60715 35×15
electrical accessories	Redundancy module, buffer module, selectivity module, DC UPS
mechanical accessories	Device identification label 20 mm × 7 mm, pale turquoise 3RT1900-1SB20
MTBF at 40 °C	500 000 h
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP1437-2BA20

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP1437-2BA20 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.