6GK7543-1MX00-0XE0 là mô đun mở rộng giao tiếp – truyền thông cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. 6GK7543-1MX00-0XE0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6GK7543-1MX00-0XE0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6GK7543-1MX00-0XE0
TIM 1531 IRC Communications module for SIMATIC S7-1500, S7-400, S7-300 with SINAUT ST7, DNP3 and IEC 60870-5-101/104 with three RJ45 interfaces for communication via IP-based networks (WAN / LAN) and a RS 232/RS 485 interface for communication via classic WAN networks
Mã sản phẩm | 6GK7543-1MX00-0XE0 |
Dòng sản phẩm | SIMATIC S7-1500, TIM 1531 IRC |
Hãng sản xuất | SIEMENS |
Nguồn cung cấp | 24 V DC (20.4-28.8 V DC) |
Kích thước (RxCxS) | 70x147x129 mm |
Trọng lượng | 525 g |
Bảng chi tiết thông số kỹ thuật 6GK7543-1MX00-0XE0
Article number | 6GK7543-1MX00-0XE0 |
product type designation | TIM 1531 IRC |
transfer rate | |
transfer rate | |
● at the 1st interface | 10 … 1 000 Mbit/s |
● at the 2nd interface | 10 … 100 Mbit/s |
● at interface 3 | 10 … 100 Mbit/s |
● acc. to RS 232 | 300 … 115 200 bit/s |
interfaces | |
number of interfaces acc. to Industrial Ethernet | 3 |
number of electrical connections | |
● for external data transmission acc. to RS 232 | 1 |
● for power supply | 1 |
number of slots | |
● for memory cards | 1 |
type of electrical connection | |
● of Industrial Ethernet interface | RJ45 port |
type of electrical connection | |
● at interface 1 for external data transmission | 9 pin Sub-D-connector, RS232 switchable to RS485 |
● for power supply | 2-pole plugable terminal block |
slot version | |
● of the memory card | SD 1.0, SD 1.1, SDHC, Siemens SMC |
storage capacity of the memory card maximum | 32 Gibyte |
supply voltage, current consumption, power loss | |
type of voltage of the supply voltage | DC |
supply voltage | 24 V |
supply voltage | 20.4 … 28.8 V |
supply voltage external at DC rated value | 24 V |
supply voltage external at DC rated value | 20.4 … 28.8 V |
consumed current | |
● from external supply voltage at DC at 24 V typical | 0.15 A |
● from external supply voltage at DC at 24 V maximum | 0.3 A |
power loss [W] with external supply voltage at 24 V DC | |
● in update mode typical | 3.9 W |
● in communication mode typical | 3.9 W |
product extension optional backup battery | No |
ambient conditions | |
ambient temperature | |
● during operation | 0 … 70 °C |
● for vertical installation during operation | 0 … 50 °C |
● for horizontally arranged busbars during operation | 0 … 70 °C |
● during storage | -40 … +70 °C |
● during transport | -40 … +70 °C |
relative humidity | |
● at 25 °C without condensation during operation maximum | 95 % |
protection class IP | IP20 |
design, dimensions and weights | |
module format | Compact module S7-1500 double-wide |
width | 70 mm |
height | 147 mm |
depth | 129 mm |
net weight | 0.525 kg |
fastening method | |
● 35 mm top hat DIN rail mounting | No |
● S7-300 rail mounting | No |
● S7-1500 rail mounting | Yes |
product features, product functions, product components general | |
product function | |
● DynDNS client | No |
number of units | |
● note | Number of TIM per S7-1500: 1 |
wire length | |
● with RS 232 interface maximum | 6 m |
● with RS 485 interface maximum | 30 m |
performance data S7 communication | |
number of possible connections for S7 communication | |
● maximum | 132; only via LAN |
● with PG connections maximum | 4 |
● with PG/OP connections maximum | 4 |
● with OP connections maximum | 4 |
service | |
● of SIMATIC communication as server | Yes |
● SINAUT ST7 via S7 communication | Yes |
● PG/OP communication | Yes |
performance data IT functions | |
number of possible connections | |
● as server by means of HTTP maximum | 2 |
● as server by means of HTTPS maximum | 2; 2 per Ethernet interface |
● as email client maximum | 1 |
performance data telecontrol | |
suitability for use | |
● node station | Yes |
● substation | Yes |
● TIM control center | Yes |
control center connection | Systems with ST7, DNP3 and IEC 60870-5-101/104 protocol |
● by means of a permanent connection | Systems with ST7, DNP3 and IEC 60870-5-101/104 protocol |
protocol is supported | |
● DNP3 | Yes |
● IEC 60870-5 | Yes |
● SINAUT ST1 protocol | No |
● SINAUT ST7 protocol | Yes |
● Modbus RTU | No |
product function data buffering if connection is aborted | Yes; 100000 data telegrams (ST7) or 250000 events (IEC 60870-5 / DNP3) |
number of data points per station maximum | 3 000 |
number of DNP3 masters | |
● for Ethernet maximum | 4 |
● with RS 232 interface maximum | 4 |
product feature buffered message frame memory | Yes |
transmission format | |
● for SINAUT ST7 protocol with polling or spontaneous 10-bit or 11-bit | Yes |
operating mode for scanning of data transmission | |
● with dedicated line/radio link with SINAUT ST7 protocol | Polling, polling with time slot procedure |
● with dial-up network with SINAUT ST7 protocol | spontaneous |
hamming distance | |
● for SINAUT ST7 protocol | 4 |
performance data teleservice | |
diagnostics function online diagnostics with SIMATIC STEP 7 | Yes |
product function | |
● program download with SIMATIC STEP 7 | Yes |
● remote firmware update | Yes |
● remote configuration | Yes |
product functions management, configuration, engineering | |
product function MIB support | Yes |
protocol is supported | |
● SNMP v1 | Yes |
● SNMP v3 | Yes |
● DCP | Yes |
● LLDP | Yes |
configuration software | |
● required | STEP 7 Professional V14 SP1 (TIA Portal) or higher |
● for CPU configuring required SINAUT TD7 block library for CPU | No |
● for PG configuring required SINAUT ST7 configuration software for PG | No |
storage location of TIM configuration data | Flash or SD card of the TIM 1531 IRC |
identification & maintenance function | |
● I&M0 – device-specific information | Yes |
● I&M1 – higher level designation/location designation | Yes |
● I&M2 – installation date | Yes |
● I&M3 – comment | Yes |
product functions diagnostics | |
product function web-based diagnostics | Yes |
product functions routing | |
service routing note | IP routing up to 1 Mbps |
product function | |
● static IP routing | Yes |
● static IP routing IPv6 | Yes |
● dynamic IP routing | No |
● dynamic IP routing IPv6 | No |
protocol is supported | |
● RIP v1 | No |
● RIPv2 | No |
● RIPnG for IPv6 | No |
● OSPFv2 | No |
● OSPFv3 for IPv6 | No |
● VRRP | No |
● VRRP for IPv6 | No |
● BGP | No |
● PPP | No |
● PPoE via DSL | No |
product functions security | |
product function | |
● MSC client via GPRS modem with MSC capability | Yes |
protocol | |
● is supported MSC protocol | Yes |
● with Virtual Private Network MSC is supported | TCP/IP |
key length for MSC with Virtual Private Network | 128 bit |
number of possible connections | |
● as MSC client with VPN connection | 1 |
● as MSC server with VPN connection | 127 |
product functions time | |
product function SICLOCK support | No |
product function pass on time synchronization | Yes |
protocol is supported | |
● NTP | Yes |
● NTP (secure) | Yes |
product component hardware real time clock | No |
product feature hardware real time clock w. battery backup | No |
time synchronization | |
● from NTP-server | Yes |
● from GPS-signal | No |
● from control center | Yes |
● from mobile network provider | No |
● PC | No |
● manual setting | No |
product functions position detection | |
product function | |
● position detection with GPS | No |
● pass on position data | No |
standards, specifications, approvals hazardous environments | |
certificate of suitability CCC for hazardous zone according to GB standard | Yes |
Nhà phân phối & báo giá 6GK7543-1MX00-0XE0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6GK7543-1MX00-0XE0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.