6ES7522-1BL10-0AA0 SM 522 DQ 32x24VDC/0.5A BA SIEMENS

8.632.000 

SIMATIC S7-1500, digital output module, DQ 32×24 V DC/0.5A BA, 32 channels in groups of 8, 4 A per group; the module supports the safety-oriented shutdown of load groups up to SILCL2 acc. to EN 62061:2005 + A2:2015, and Category 3 / PL d according to EN ISO 13849-1:2015. delivery incl. front connector push-in.

Tải về datasheet (pdf): Tại đây!

6ES7522-1BL10-0AA0 là mô đun mở rộng tín hiệu ngõ ra số cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. 6ES7522-1BL10-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7522-1BL10-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

6ES7522-1BL10-0AA0

Bảng tóm tắt thông số kỹ thuật 6ES7522-1BL10-0AA0

SIMATIC S7-1500, digital output module, DQ 32×24 V DC/0.5A BA, 32 channels in groups of 8, 4 A per group; the module supports the safety-oriented shutdown of load groups up to SILCL2 acc. to EN 62061:2005 + A2:2015, and Category 3 / PL d according to EN ISO 13849-1:2015. delivery incl. front connector push-in

Mã sản phẩm 6ES7522-1BL10-0AA0
Dòng sản phẩm SIMATIC S7-1500, SM 522
Hãng sản xuất SIEMENS
Số lượng đầu ra số 32 DQ 24 V DC/0.5A BA
Nguồn cung cấp 24 V DC (20.4-28.8 V DC)
Kích thước (RxCxS) 25x147x129 mm
Trọng lượng 280 g

Bảng chi tiết thông số kỹ thuật 6ES7522-1BL10-0AA0

Article number 6ES7522-1BL10-0AA0
S7-1500, DQ 32x24VDC/0.5A BA
General information
Product type designation DQ 32x24VDC/0.5A BA
HW functional status FS01
Firmware version
● FW update possible Yes
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
● Prioritized startup Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V13 / V13
● STEP 7 configurable/integrated from version V5.5 SP3 / –
● PROFIBUS from GSD version/GSD revision V1.0 / V5.1
● PROFINET from GSD version/GSD revision V2.3 / –
Operating mode
● DQ Yes
● DQ with energy-saving function No
● PWM No
● Oversampling No
● MSO Yes
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes; through internal protection with 7 A per group
Input current
Current consumption, max. 60 mA
Output voltage
Rated value (DC) 24 V
Power
Power available from the backplane bus 1.15 W
Power loss
Power loss, typ. 3.8 W
Digital outputs
Type of digital output Transistor
Number of digital outputs 32
Current-sourcing Yes
Digital outputs, parameterizable No
Short-circuit protection Yes
● Response threshold, typ. 1 A
Limitation of inductive shutdown voltage to L+ (-53 V)
Controlling a digital input Yes
Switching capacity of the outputs
● with resistive load, max. 0.5 A
● on lamp load, max. 5 W
Load resistance range
● lower limit 48 Ω
● upper limit 12 kΩ
Output voltage
● for signal “1”, min. L+ (-0.8 V)
Output current
● for signal “1” rated value 0.5 A
● for signal “1” permissible range, max. 0.5 A
● for signal “0” residual current, max. 0.5 mA
Output delay with resistive load
● “0” to “1”, max. 100 µs
● “1” to “0”, max. 500 µs
Parallel switching of two outputs
● for logic links Yes
● for uprating No
● for redundant control of a load Yes
Switching frequency
● with resistive load, max. 100 Hz
● with inductive load, max. 0.5 Hz; According to IEC 60947-5-1, DC-13
● on lamp load, max. 10 Hz
Total current of the outputs
● Current per channel, max. 0.5 A; see additional description in the manual
● Current per group, max. 4 A; see additional description in the manual
● Current per module, max. 16 A; see additional description in the manual
Cable length
● shielded, max. 1 000 m
● unshielded, max. 600 m
Interrupts/diagnostics/status information
Diagnostics function No
Substitute values connectable No
Alarms
● Diagnostic alarm No
● Maintenance interrupt No
Diagnoses
● Monitoring the supply voltage No
● Wire-break No
● Short-circuit No
● Group error No
Diagnostics indication LED
● RUN LED Yes; green LED
● ERROR LED Yes; red LED
● Monitoring of the supply voltage (PWR-LED) Yes; green LED
● Channel status display Yes; green LED
● for channel diagnostics No
● for module diagnostics No
Potential separation
Potential separation channels
● between the channels No
● between the channels, in groups of 8
● between the channels and backplane bus Yes
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions No
Suitable for safety-related tripping of standard modules Yes; From FS02
Highest safety class achievable for safety-related tripping of standard modules
● Performance level according to ISO 13849-1 PL d
● Category according to ISO 13849-1 Cat. 3
● SILCL according to IEC 62061 SILCL 2
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width 25 mm
Height 147 mm
Depth 129 mm
Weights
Weight, approx. 280 g
Other
Note: Supplied incl. 40-pole push-in front connectors

Nhà phân phối & báo giá 6ES7522-1BL10-0AA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7522-1BL10-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

5/5 - (1 bình chọn)
Trọng lượng 0,280 kg
Kích thước 2,5 × 14,7 × 12,9 cm
Nhận thông báo qua Email
Nhận thông báo cho
guest

Mới nhất
Cũ nhất
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x