6ES7522-1BF00-0AB0 SM 522 DQ 8x24VDC/2A HF SIEMENS
4.027.000 ₫
SIMATIC S7-1500, digital output module DQ 8×24 V DC/2A HF; 8 channels in groups of 8; 8 A per group; diagnostics; substitute value: the module supports the safety-oriented shutdown of load groups up to SILCL2 acc. to EN 62061:2005 + A2:2015, and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately.
Tải về datasheet (pdf): Tại đây!
6ES7522-1BF00-0AB0 là mô đun mở rộng tín hiệu ngõ ra số cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. 6ES7522-1BF00-0AB0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7522-1BF00-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7522-1BF00-0AB0
SIMATIC S7-1500, digital output module DQ 8×24 V DC/2A HF; 8 channels in groups of 8; 8 A per group; diagnostics; substitute value: the module supports the safety-oriented shutdown of load groups up to SILCL2 acc. to EN 62061:2005 + A2:2015, and Category 3 / PL d according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately
| Mã sản phẩm | 6ES7522-1BF00-0AB0 |
| Dòng sản phẩm | SIMATIC S7-1500, SM 522 |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu ra số | 8 DQ 24 V DC/2A HF |
| Nguồn cung cấp | 24 V DC (20.4-28.8 V DC) |
| Kích thước (RxCxS) | 35x147x129 mm |
| Trọng lượng | 240 g |
Bảng chi tiết thông số kỹ thuật 6ES7522-1BF00-0AB0
| Article number | 6ES7522-1BF00-0AB0 |
| S7-1500, DQ 8x24VDC/2A HF | |
| General information | |
| Product type designation | DQ 8x24VDC/2A HF |
| HW functional status | FS03 |
| Firmware version | V2.2.0 |
| ● FW update possible | Yes |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| ● Prioritized startup | Yes |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V13 SP1 / – |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 / – |
| ● PROFIBUS from GSD version/GSD revision | V1.0 / V5.1 |
| ● PROFINET from GSD version/GSD revision | V2.3 / – |
| Operating mode | |
| ● DQ | Yes |
| ● DQ with energy-saving function | Yes; with an application |
| ● PWM | Yes |
| ● Cam control (switching at comparison values) | No |
| ● Oversampling | No |
| ● MSO | Yes |
| ● Integrated operating cycle counter | Yes |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes; through internal protection with 10 A per group |
| Input current | |
| Current consumption, max. | 40 mA; 20 mA per group, no output is activated. |
| Output voltage | |
| Rated value (DC) | 24 V |
| Rated value (AC) | |
| Power | |
| Power available from the backplane bus | 0.9 W |
| Power loss | |
| Power loss, typ. | 5.6 W; 6.8 W for PWM operation |
| Digital outputs | |
| Type of digital output | Transistor |
| Number of digital outputs | 8 |
| Current-sinking | |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | Yes |
| ● Response threshold, typ. | 3 A |
| Limitation of inductive shutdown voltage to | -17 V |
| Controlling a digital input | Yes |
| Digital output functions, parameterizable | |
| ● Freely usable digital output | Yes |
| ● PWM output | Yes |
| — Number, max. | 2 |
| — Cycle duration, parameterizable | Yes; 2 … 100 ms continuous |
| — ON period, min. | 0 % |
| — ON period, max. | 100 % |
| — Resolution of the duty cycle | 0.1 % |
| — Minimum pulse duration | 300 µs |
| Switching capacity of the outputs | |
| ● with resistive load, max. | |
| ● on lamp load, max. | 10 W |
| Load resistance range | |
| ● lower limit | 12 Ω |
| ● upper limit | 4 kΩ |
| Output voltage | |
| ● for signal “1”, min. | L+ (-0.8 V) |
| Output current | |
| ● for signal “1” rated value | 2 A |
| ● for signal “1” permissible range, max. | 2.4 A; note derating specification for PWM operation |
| ● for signal “0” residual current, max. | 0.5 mA |
| Output delay with resistive load | |
| ● “0” to “1”, typ. | 80 µs |
| ● “0” to “1”, max. | 100 µs |
| ● “1” to “0”, typ. | 300 µs |
| ● “1” to “0”, max. | 500 µs |
| Parallel switching of two outputs | |
| ● for logic links | Yes |
| ● for uprating | No |
| ● for redundant control of a load | Yes |
| Switching frequency | |
| ● with resistive load, max. | 100 Hz; With PWM operation: 500 Hz |
| ● with inductive load, max. | 0.5 Hz; According to IEC 60947-5-1, DC-13; max. 500 Hz with PWM operation only with external circuit; see additional description in the manual |
| ● on lamp load, max. | 10 Hz |
| Total current of the outputs | |
| ● Current per channel, max. | 2 A; see additional description in the manual |
| ● Current per group, max. | 8 A; see additional description in the manual |
| ● Current per module, max. | 16 A; see additional description in the manual |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 600 m |
| Isochronous mode | |
| Execution and activation time (TCO), min. | |
| Bus cycle time (TDP), min. | |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| ● Maintenance interrupt | Yes |
| Diagnoses | |
| ● Monitoring the supply voltage | Yes |
| ● Wire-break | No |
| ● Short-circuit | Yes |
| ● Group error | Yes |
| Diagnostics indication LED | |
| ● RUN LED | Yes; green LED |
| ● ERROR LED | Yes; red LED |
| ● MAINT LED | Yes; Yellow LED |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green LED |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | Yes; red LED |
| ● for module diagnostics | Yes; red LED |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | No |
| ● between the channels, in groups of | 4 |
| ● between the channels and backplane bus | Yes |
| Permissible potential difference | |
| between different circuits | |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Standards, approvals, certificates | |
| Suitable for safety functions | No |
| Suitable for safety-related tripping of standard modules | Yes; From FS03 |
| Highest safety class achievable for safety-related tripping of standard modules | |
| ● Performance level according to ISO 13849-1 | PL d |
| ● Category according to ISO 13849-1 | Cat. 3 |
| ● SILCL according to IEC 62061 | SILCL 2 |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | |
| ● horizontal installation, max. | |
| ● vertical installation, min. | |
| ● vertical installation, max. | |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions | |
| Width | 35 mm |
| Height | 147 mm |
| Depth | 129 mm |
| Weights | |
| Weight, approx. | 240 g |
Nhà phân phối & báo giá 6ES7522-1BF00-0AB0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7522-1BF00-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
| Trọng lượng | 0,240 kg |
|---|---|
| Kích thước | 3,5 × 14,7 × 12,9 cm |
