IPC477E PRO

---

Cấu hình máy tính công nghiệp IPC477E PRO

Cấu hình mặc định SIMATIC IPC477E PRO: fully enclosed IP65; 4USB (back); w/o USB (front); Ethernet (10/100/1000). Chúng ta có thể tự chọn cấu hình các thành phần còn lại cho SIMATIC IPC477E PRO theo các tùy chọn có sẵn như sau:

Thông số kỹ thuật chung của SIMATIC IPC477E PRO

Article number	6AV7251-.....-....
	SIMATIC IPC477E PRO
General information
Product type designation	IPC477E
Installation type/mounting
Mounting	For mounting on stand or supporting bracket
Design	Panel PC on pedestal or supporting arm
maximum permissible installation angle +/-	±45 °
Supply voltage
Type of supply voltage	24 V DC
Mains buffering
● Mains/voltage failure stored energy time	20 ms
Processor
Processor type	Celeron G3902 (2C/2T, 1.6 GHz, 2 MB Cache); Core i3-6102E (2C/4T, 1.9 GHz, 3 MB Cache); Core i5-6442EQ (4C/4T, 1.9 (2.7) GHz, 6 MB Cache, iAMT); Xeon E3-1505L v5 (4C/8T, 2.0 (2.8) GHz, 8 MB Cache, iAMT)
Chipset	Intel C236 / Intel H110
Graphic
Graphics controller	Intel HD graphics controller
Drives
SSD	Yes; ≥ 128 GB optional
Memory
Type of memory	DDR4-2400 SO-DIMM
Main memory	4 / 8 / 16 GB, ECC optional
Capacity of main memory, max.	16 Gbyte
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.	512 kbyte; 128 KB can be stored in the buffer time
Hardware configuration
Slots
● Number of PCI slots	0; Different to the built-in unit
● Number of PCI slots	0; Different to the built-in unit
● Number of compact flash slots	1; CFast
Interfaces
Number of industrial Ethernet interfaces	3; 3x Ethernet (RJ45)
USB port	4x USB 3.0 onboard (rear)
Connection for keyboard/mouse	USB / USB
serial interface	Without / 2x COM (RS 232 / 422 / 485), selectable in the BIOS
Video interfaces
● Graphics interface	2x DisplayPort
Industrial Ethernet
● Industrial Ethernet interface	3x Ethernet (RJ45)
— 100 Mbps	Yes
— 1000 Mbps	Yes
Interrupts/diagnostics/status information
Bus diagnostics	Yes
Integrated Functions
Monitoring functions
● Temperature monitoring	Yes
● Watchdog	Yes
● Fan	No
● Monitoring function via network	Optional
EMC
Interference immunity against discharge of static electricity
● Interference immunity against discharge of static electricity	±6 kV contact discharge acc. to IEC 61000-4-2; ±8 kV air discharge acc. to IEC 61000-4-2
Interference immunity against high-frequency electromagnetic fields
● Interference immunity against high frequency radiation	10 V/m, 80 ... 2 000 MHz, 80 % AM acc. to IEC 61000-4-3; 3 V/m, 2 ... 2.7 GHz; 10 V, 10 kHz ... 80 MHz acc. to IEC 61000-4-6
Interference immunity to cable-borne interference
● Interference immunity on supply cables	±2 kV acc. to IEC 61000-4-4, burst; ±1 kV acc. to IEC 61000-4-5, surge symmetric; ±2 kV acc. to IEC 61000-4-5, surge asymmetric
● Interference immunity on signal cables >30m	±2 kV acc. to IEC 61000-4-5, surge, length > 30 m
● Interference immunity on signal cables < 30m	±1 kV acc. to IEC 61000-4-4; burst; length < 3 m; ±2 kV acc. to IEC 61000-4-4; burst; length > 3 m
Interference immunity against voltage surge
● asymmetric interference	±2 kV acc. to IEC 61000-4-5, surge asymmetric
● symmetric interference	±1 kV acc. to IEC 61000-4-5, surge symmetric
Interference immunity to magnetic fields
● Interference immunity to magnetic fields at 50 Hz	100 A/m; to IEC 61000-4-8
Emission of conducted and non-conducted interference
● Interference emission via line/AC current cables	EN 61000-6-3, EN 61000-6-4, CISPR 22 Class B, FCC Class A
Degree and class of protection
IP65 (all-round)	Yes; IP65 fully enclosed
IP (at the front)	IP65
IP (rear)	IP65
Standards, approvals, certificates
CE mark	Yes
CSA approval	Yes
UL approval	Yes
● UL 508	Yes
cULus	Yes
RCM (formerly C-TICK)	Yes
KC approval	Yes
EAC (formerly Gost-R)	Yes
EMC	CE, EN 61000-6-4; CISPR 22 Class A; FCC Class A
Use in hazardous areas
● ATEX Zone 2	Yes; Optional
● IECEx Zone 2	Yes; Optional
● cULus Class I Zone 2, Division 2	Yes; Optional
Marine approval
● Germanischer Lloyd (GL)	Yes
● American Bureau of Shipping (ABS)	Yes
● Det Norske Veritas (DNV)	Yes
● Korean Register of Shipping (KRS)	Yes
● Lloyds Register of Shipping (LRS)	Yes
Ambient conditions
Ambient temperature during operation
● Ambient temperature during operation	0 °C to 45 °C
Ambient temperature during storage/transportation
● min.	-20 °C
● max.	60 °C
Relative humidity
● Relative humidity	Tested according to IEC 60068-2-78, IEC 60068-2-30: Operation: 5 % to 85 % at 30 °C (no condensation), storage / transport: 5 % to 95 % at 25 / 55 °C (no condensation)
Vibrations
● Vibration resistance during operation acc. to IEC 60068-2-6	tested to DIN IEC 60068-2-6: 10 Hz to 58 Hz: 0.075 mm, 58 Hz to 200 Hz: 9.8 m/s² (1 g)
Shock testing
● Shock load during operation	Tested according to IEC 60068-2-27, IEC 60068-2-29: half-sine: 50 m/s² (5 g), 30 ms, 100 shocks per axis
Operating systems
pre-installed operating system	Windows 7 Ultimate (Multi-Language) 64-bit, Windows Embedded Standard 7 E/P 32-bit / 64-bit, Windows 10
without operating system	Yes; Optional
pre-installed operating system
● Windows 7	Yes; Ultimate 64 bit
● Windows 10 Enterprise	Yes; Windows 10 Enterprise 2016 LTSB, 64 bit, MUI

SIEMENS giới thiệu về SIMATIC IPC477E PRO

The fully enclosed IP65-protected SIMATIC IPC477E PRO in 15", 19" and 22" versions extends the portfolio of PRO devices.

The robust aluminum housing allows it to be used directly on the machine even in harsh environmental conditions. The operating unit can either be mounted on a pedestal or connected to a support arm system from above.

Đặc trưng chính của SIMATIC IPC477E PRO

Direct mounting on the machine – without control cabinet

Enhancement of the machine by the modern, slim design

Compact design ideal for applications with little space available

Excellent industrial compatibility due to rugged construction, even when subjected to extreme vibration and shock

Intuitive operation and more space for visualization due to widescreen format, and greater resistance to corrosive cleaning agents and scratches thanks to capacitive multitouch glass front

Maintenance-free due to lack of rotating components (fan and hard disk)

The different mounting options offer complete flexibility when choosing make and model of the support arm

Standard connecting cables can be used for easy commissioning and maintenance

High degree of investment protection thanks to assured availability of spare parts for a period of 5 years following the end of active marketing

Excellent continuity of components for machine concepts with a long service life without any new engineering costs

Savings in time and costs due to service-friendly equipment construction

• • Minimization of downtimes thanks to high system availability
  • Efficient self-diagnostics (DiagBase and SIMATIC IPC DiagMonitor)

High reliability and security of an embedded platform

Integral component of Totally Integrated Automation (TIA):

• • Enhanced productivity, minimization of engineering costs, reduction of lifecycle costs

Ứng dụng phù hợp với SIMATIC IPC477E PRO

The SIMATIC IPC477E is designed for use directly on the machine in tough environmental conditions, where the combination of ruggedness and maximum reliability is a major priority (the reliability of an embedded platform) and the openness of a PC is also required (e.g. connection of I/O devices such as printers, keyboards, etc.).

The compact and versatile SIMATIC IPC477E PRO operator panels can be integrated perfectly into many machines or production and automation systems. Thanks to the low-profile design, it can also be used in confined spaces.

The PC is used in both factory and process automation, as support-arm or pedestal-mounted versions.

The SIMATIC IPC477E PRO is the ideal platform for PC-based Automation:

• • PC-based visualization on site at the machine with SIMATIC WinCC Advanced or WinCC Professional
  • PC-based Control with SIMATIC Software Controllers
  • SIMATIC WinCC Client (standard or multi client) for distributed operator control and monitoring
  • SIMATIC WinCC as single-user station solution for centralized operator control and monitoring (also in combination with WinCC WebNavigator server)

SIMATIC IPC477E PRO được thiết kế như thế nào?

SIMATIC IPC477E PRO is a compact device with a high-quality aluminum enclosure.

Basic design

Rugged aluminum enclosure, resistant to vibration and shock, with high electromagnetic compatibility

Graphics onboard for additional monitor/flat panel (DVI and DisplayPort):

• • DisplayPort resolution: up to 1 920 x 1 200 / true color / 60 to 120 Hz
  • DVI-I resolution: up to 1 920 x 1 200 pixels / true color

Interfaces:

• • 3 x LAN 10/100/1000 Mbps Ethernet interface (RJ45)
  • 4 x high-speed USB V3.0
  • 1 x COM1 (RS232)

Isolated power supply: 24 V DC (19.2 to 28.8 V)

Computer unit design versions

Processor:

• • Celeron G3902E; 3x Gigabit Ethernet (IE/PN)
  • Core i3-6102E; 3x Gigabit Ethernet (IE/PN)
  • Core i5-6442EQ; 3x Gigabit Ethernet (IE/PN)
  • XEON E3-1505L; 3x Gigabit Ethernet (IE/PN)

Main memory configuration from 4 GB (8/16 GB optional), DDR3 SDRAM

Fieldbus

• • PROFINET onboard, 3 x RJ45

Drives:

• • Solid-state drive, 256 GB, 240 GB or 480 GB, rugged alternative to hard disk
  • Flash drive (replaceable, accessible): 2 GB, 4 GB, 8 GB, 16 GB or 128 GB

Preinstalled operating systems:

• • Windows 7 Ultimate MUI
  • Windows Embedded Standard 7
  • Windows 10 IoT Enterprise 2016 LTSB (64-bit)
  • Windows 10 Enterprise 2019 LTSC (64-bit)

Components of the operator control unit:

The operator control units are available in the following versions:

15" multi-touch (1 366 x 768)

• • Prepared for support arm without extension components (flange on top)
  • Prepared for pedestal/extension components (flange below)
  • Prepared for support arm and extension components (round tube connection)

19" multi-touch (1 366 x 768 or 1 920 x 1 080)

• • Prepared for support arm without extension components (flange on top)
  • Prepared for pedestal/extension components (flange below)
  • Prepared for support arm and extension components (round tube connection)

22" multi-touch (1 920 x 1 080)

• • Prepared for support arm without extension components (flange on top)
  • Prepared for pedestal/extension components (flange below)
  • Prepared for support arm and extension components (round tube connection)

24" multi-touch (1 920 x 1 080)

• • Prepared for pedestal/extension components (flange below)
  • Prepared for support arm and extension components (round tube connection)

The integration of operator controls in the new Extension Units enables customers to implement a large variety of operating scenarios:

SIMATIC IPC DiagMonitor

• • PC diagnostics/alarm software for early detection and diagnosis of PC problems
  • Comprehensive monitoring of temperature, watchdog
  • Operating hours counter for preventive maintenance
  • Integrated protocol function, extensive text messages, online help (German/English), network-wide monitoring via SNMP and OPC interface possible

Chức năng vượt trội trong SIMATIC IPC477E PRO

Diagnostics

• • DiagBase: Integrated, parameterizable monitoring functions (program flowchart/watchdog, internal enclosure temperature, DIAG bit for CFast cards similar to S.M.A.R.T for hard disks)
  • Expanded diagnostics/messages via Ethernet, email, text message and for direct transfer to SIMATIC software via OPC (optionally via SIMATIC IPC DiagMonitor)

Integrated interfaces

• • Ethernet: The integrated PROFINET interfaces (10/100/1000 Mbps) can be used for IT communication and for data exchange with PLCs such as SIMATIC S7 (with "SOFTNET S7" software packages).
  • Other interfaces: 4 USB (Universal Serial Bus) interfaces and one serial interface are available for connecting additional I/O devices.

*Chú ý: chúng ta có thể tùy chọn các thành phần còn lại để tạo nên một cấu hình máy tính công nghiệp SIMATIC IPC477E PRO hoàn chỉnh (Vui lòng xem các tùy chọn ở phía trên hoặc liên hệ để được tư vấn).