6EP3332-7SB00-0AX0 Bộ nguồn 24VDC/2.5A (120-230VAC/DC) SITOP PSU6200

Name: Bộ nguồn 24VDC/2.5A (120-230VAC/DC) SITOP PSU6200 6EP3332-7SB00-0AX0
SKU: 6EP3332-7SB00-0AX0

Liên hệ

SITOP PSU6200 24 V/2.5 A Stabilized power supply Input: 120 – 230 V AC, (120 – 240 V DC) Output: 24 V DC/2.5 A.

Tải về datasheet (pdf): Tại đây!

6EP3332-7SB00-0AX0 là bộ cung cấp nguồn ổn định cho các thiết bị được hãng SIEMENS sản xuất và phát triển với thương hiệu SITOP. 6EP3332-7SB00-0AX0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3332-7SB00-0AX0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

Bộ nguồn 24VDC/2.5A (120-230VAC/DC) SITOP PSU6200 6EP3332-7SB00-0AX0

Mục lục

Bảng tóm tắt thông số kỹ thuật 6EP3332-7SB00-0AX0

SITOP PSU6200 24 V/2.5 A Stabilized power supply Input: 120 – 230 V AC, (120 – 240 V DC) Output: 24 V DC/2.5 A

Mã sản phẩm	6EP3332-7SB00-0AX0
Dòng sản phẩm	SITOP PSU6200
Hãng sản xuất	SIEMENS
Nguồn đầu vào	120 – 230 V AC, (120 – 240 V DC)
Nguồn đầu ra	24 V DC/2.5 A
Kích thước (RxCxS)	40 x 100 x 88 mm
Trọng lượng	250 g

Bảng chi tiết thông số kỹ thuật 6EP3332-7SB00-0AX0

Article number	6EP3332-7SB00-0AX0
Product	SITOP PSU6200
Power supply, type	24 V/2.5 A
Input
Input	1-phase AC or DC
Rated voltage value Vin rated	120 … 240 V
Voltage range AC	85 … 264 V
supply voltage
● at DC	120 … 240 V
input voltage
● at DC	110 … 275 V
Wide-range input	Yes
Overvoltage resistance	300 V AC for 30 s
Mains buffering	at Vin = 230 V
Mains buffering at Iout rated, min.	150 ms; at Vin = 230 V
Rated line frequency 1	50 Hz
Rated line frequency 2	60 Hz
Rated line range	47 … 63 Hz
input current
● at rated input voltage 120 V	1.1 A
● at rated input voltage 230 V	0.6 A
Switch-on current limiting (+25 °C), max.	32 A
Built-in incoming fuse	3.15 A
Protection in the mains power input (IEC 898)	Circuit breaker from 4 A characteristic C/6 A characteristic B to 16 A characteristic C or circuit breaker 3RV2011-1EA10 (setting 4 A) or 3RV2711-1ED10 (UL 489)
Output
Output	Controlled, isolated DC voltage
number of outputs	1
Rated voltage Vout DC	24 V

● output voltage at output 1 at DC rated value	24 V
Total tolerance, static ±	3 %
Static mains compensation, approx.	0.1 %
Static load balancing, approx.	0.1 %
Residual ripple peak-peak, max.	30 mV
Residual ripple peak-peak, typ.	20 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	30 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz)	20 mV
Adjustment range	22.2 … 26.4 V
product function output voltage adjustable	Yes
Output voltage setting	via potentiometer; max. 60 W
Status display	Green LED for 24 V OK
Signaling
On/off behavior	Overshoot of Vout approx. 3 %
Startup delay, max.	1 s
Voltage rise, typ.	100 ms
Rated current value Iout rated	2.5 A
Current range	0 … 2.5 A
● Note	+60 … +70 °C: Derating 2.5%/K
supplied active power typical	60 W
short-term overload current
● on short-circuiting during the start-up typical	2.5 A
● at short-circuit during operation typical	2.5 A
Parallel switching for enhanced performance	No
Efficiency
Efficiency at Vout rated, Iout rated, approx.	89 %
Power loss at Vout rated, Iout rated, approx.	7 W
power loss [W] during no-load operation maximum	0.8 W
Closed-loop control
Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ.	3 %
Load step setting time 10 to 90%, typ.	1 ms
Load step setting time 90 to 10%, typ.	1 ms
setting time maximum	2 ms
Protection and monitoring
Output overvoltage protection	< 32 V
Current limitation, typ.	3.1 A
property of the output short-circuit proof	Yes
Short-circuit protection	Shutdown and periodic restart attempts
Safety
Primary/secondary isolation	Yes
galvanic isolation	Safety extra low output voltage Vout according to EN 60950-1
Protection class	Class I
leakage current
● maximum	3.5 mA
Degree of protection (EN 60529)	IP20
Approvals
CE mark	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Explosion protection	–
certificate of suitability NEC Class 2	Yes
FM approval	–
CB approval	Yes
certificate of suitability EAC approval	Yes
Regulatory Compliance Mark (RCM)	No
Marine approval	in process: DNV GL, ABS
EMC
Emitted interference	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2
Noise immunity	EN 61000-6-2
environmental conditions
ambient temperature
● during operation	-25 … +70 °C
— Note	with natural convection
● during transport	-40 … +85 °C
● during storage	-40 … +85 °C
Humidity class according to EN 60721	Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology	Push-in terminals
Connections
● Supply input	L1/+, L2/N/-; PE PushIn for 0.5 … 2.5 mm² single-core/finely stranded
● Output	+1, -1, -2: PushIn for 0.5 … 2.5 mm²
● Auxiliary	–
width of the enclosure	40 mm
height of the enclosure	100 mm
depth of the enclosure	88 mm
required spacing
● top	50 mm
● bottom	50 mm
● left	0 mm
● right	0 mm
Weight, approx.	0.25 kg
product feature of the enclosure housing can be lined up	Yes
Installation	Snaps onto DIN rail EN 60715 35×7.5/15
electrical accessories	Buffer module, redundancy module
mechanical accessories	Identification labels SIMATIC ET 200SP 6ES7193-6LF30-0AW0
other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối & báo giá 6EP3332-7SB00-0AX0

Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6EP3332-7SB00-0AX0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.