6ES7307-1EA01-0AA0 PS 307 120/230VAC 24VDC/5A

4.561.000 

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V/5 A DC.

Tải về datasheet (pdf): Tại đây!

6ES7307-1EA01-0AA0 là mô đun cấp nguồn cho PLC S7-300 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. 6ES7307-1EA01-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7307-1EA01-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

6ES7307-1EA01-0AA0

Bảng tóm tắt thông số kỹ thuật 6ES7307-1EA01-0AA0

SIMATIC S7-300 Regulated power supply PS307 input: 120/230 V AC, output: 24 V/5 A DC

Mã sản phẩm 6ES7307-1EA01-0AA0
Dòng sản phẩm SIMATIC S7-300, PS 307
Hãng sản xuất SIEMENS
Nguồn cung cấp 120/230 V AC
Nguồn đầu ra 24 V DC/ 5 A
Kích thước (RxCxS) 60x125x120 mm
Trọng lượng 600 g

Bảng chi tiết thông số kỹ thuật 6ES7307-1EA01-0AA0

Article number 6ES7307-1EA01-0AA0
Product PS 307
Power supply, type 24 V/5 A
Input
Input 1-phase AC
Note Automatic range selection
supply voltage
1 at AC rated value 120 V
2 at AC rated value 230 V
at DC
input voltage
1 at AC 85 … 132 V
2 at AC 170 … 264 V
at DC
Wide-range input No
Overvoltage resistance 2.3 × Vin rated, 1.3 ms
Mains buffering at Vin = 93/187 V
Mains buffering at Iout rated, min. 20 ms; at Vin = 93/187 V
Rated line frequency 1 50 Hz
Rated line frequency 2 60 Hz
Rated line range 47 … 63 Hz
input current
at rated input voltage 120 V 2.3 A
at rated input voltage 230 V 1.2 A
at rated input voltage 24 V
at rated input voltage 110 V
Switch-on current limiting (+25 °C), max. 20 A
duration of inrush current limiting at 25 °C
maximum 3 ms
I²t, max. 1.2 A²·s
Built-in incoming fuse T 3,15 A/250 V (not accessible)
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 6 A characteristic C
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
Total tolerance, static ± 3 %
Static mains compensation, approx. 0.1 %
Static load balancing, approx. 0.5 %
Residual ripple peak-peak, max. 50 mV
Residual ripple peak-peak, typ. 10 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 150 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz) 20 mV
product function output voltage adjustable No
Output voltage setting
Status display Green LED for 24 V OK
On/off behavior No overshoot of Vout (soft start)
Startup delay, max. 2 s
Voltage rise, typ. 10 ms
Rated current value Iout rated 5 A
Current range 0 … 5 A
Note
supplied active power typical 120 W
short-term overload current
on short-circuiting during the start-up typical 20 A
at short-circuit during operation typical 20 A
duration of overloading capability for excess current
on short-circuiting during the start-up 100 ms
at short-circuit during operation 100 ms
Parallel switching for enhanced performance Yes
Numbers of parallel switchable units for enhanced performance
Efficiency
Efficiency at Vout rated, Iout rated, approx. 87 %
Power loss at Vout rated, Iout rated, approx. 18 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max. 0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 1 %
Load step setting time 50 to 100%, typ. 0.3 ms
Load step setting time 100 to 50%, typ. 0.3 ms
setting time maximum
Protection and monitoring
Output overvoltage protection Additional control loop, shutdown at < 28.8 V, automatic restart
Current limitation 5.5 … 6.5 A
property of the output short-circuit proof Yes
Short-circuit protection Electronic shutdown, automatic restart
enduring short circuit current RMS value
maximum 7 A
Overload/short-circuit indicator
Safety
Primary/secondary isolation Yes
galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class Class I
leakage current
maximum 3.5 mA
typical 0.5 mA
Degree of protection (EN 60529) IP20
Approvals
CE mark Yes
UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289
Explosion protection ATEX (EX) II 3G Ex nA II T4; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455
certificate of suitability NEC Class 2 No
FM approval Class I, Div. 2, Group ABCD, T4
CB approval No
certificate of suitability EAC approval Yes
Marine approval In S7-300 system
EMC
Emitted interference EN 55022 Class B
Supply harmonics limitation EN 61000-3-2
Noise immunity EN 61000-6-2
environmental conditions
ambient temperature
during operation 0 … 60 °C
— Note with natural convection
during transport -40 … +85 °C
during storage -40 … +85 °C
Humidity class according to EN 60721 Climate class 3K3, 5 … 95% no condensation
Mechanics
Connection technology screw-type terminals
Connections
Supply input L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded
Output L+, M: 3 screw terminals each for 0.5 … 2.5 mm²
Auxiliary
width of the enclosure 60 mm
height of the enclosure 125 mm
depth of the enclosure 120 mm
required spacing
top 40 mm
bottom 40 mm
left 0 mm
right 0 mm
Weight, approx. 0.6 kg
product feature of the enclosure housing can be lined up Yes
Installation Can be mounted onto S7 rail
mechanical accessories Mounting adapter for standard mounting rail (6EP1971-1BA00)
MTBF at 40 °C 2 480 589 h
other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối và báo giá 6ES7307-1EA01-0AA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7307-1EA01-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

5/5 - (1 bình chọn)
Trọng lượng 0,600 kg
Kích thước 6 × 12,5 × 12 cm
Nhận thông báo qua Email
Nhận thông báo cho
guest

Mới nhất
Cũ nhất
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x