SIMATIC Energy Suite là phần mềm thu thập dữ liệu năng lượng và quản lý tải. Nếu bạn muốn kiểm soát chi phí năng lượng trong dài hạn và bạn đang tập trung vào tương lai kỹ thuật số, bạn sẽ trang bị cho nhà máy của mình công nghệ đo lường năng lượng tích hợp, nhờ đó giúp quản lý năng lượng tự động hóa các quy trình sản xuất của bạn – đó là nơi tiêu hao nhiều năng lượng nhất.

Phan Mem SIMATIC Energy Suite

SIMATIC Energy Suite là một tiện ích bổ sung tùy chọn cho TIA Portal, nhằm quản lý năng lượng hiệu quả và được liên kết với hệ thống tự động hóa, bởi vậy tạo ra sự minh bạch về năng lượng trong hệ thống sản xuất. Bằng cách liên kết giữa mức tiêu thụ năng lượng, bộ đếm sản xuất và trạng thái hoạt động, có thể dễ dàng đánh giá hiệu quả năng lượng dựa trên các chỉ số hiệu suất năng lượng (EnPI).

Toi Uu Nang Luong Bang SIMATIC Energy Suite

MESIDAS.COM chuyên cung cấp license (key/code) cấp phép/ kích hoạt bản quyền cho các phần mềm tự động hóa Siemens. Nếu bạn đang cần tư vấn, báo giá hay mua license SIMATIC Energy Suite thì hãy liên hệ với MESIDAS GROUP để được hỗ trợ một cách nhanh chóng, hiệu quả và tận tâm nhé.

Thông số kỹ thuật của SIMATIC Energy Suite V16

PC hardware requirements In accordance with the requirement of the TIA Portal components:
– SIMATIC STEP 7 (TIA Portal)
– SIMATIC WinCC Professional, Advanced, Comfort, Basic
Operating system requirements In accordance with the requirement of the TIA Portal components:
– SIMATIC STEP 7 (TIA Portal)
– SIMATIC WinCC Professional, Advanced, Comfort, Basic
Supported STEP 7 version SIMATIC STEP 7 V16
Supported WinCC versions SIMATIC WinCC V16 Professional, Advanced, Comfort, Basic
Supported SIMATIC CPUs
SIMATIC Energy Suite Runs on all S7-1500 CPUs (except S7-1500S) and ET 200SP CPU; with FW V2.0 and higher.
S7 Energy Efficiency Monitor for Machines Runs on all S7-1500 CPUs and ET 200SP CPUs; with FW V2.1

Runs on all S7-1200 CPUs; with FW V4.2

SIMATIC Energy Suite có sẵn những mã sản phẩm sau:

Giao Dien Giam Sat Cho SIMATIC Energy Suite

6AV2108-0AA00-0AL0

SIMATIC Energy Suite Engineering, Software Update Service; Within the framework of this contract, you will receive for one year all up-to-date software versions. The contract is extended automatically by 1 year if it is not canceled 3 months prior to expiration. Period of delivery and service: 1 year from date of invoice; Requirement for conclusion: current version of the software

6AV2108-0AA00-0AY0

SIMATIC Energy Suite Engineering, Software Update Service; within the framework of this contract, you will receive for one year all up-to-date software versions. The contract is extended automatically by 1 year, if not canceled 3 months prior to expiration. Period of delivery and service: 1 year from date of invoice; Requirement for conclusion: current version of the software. Email address required for delivery

6AV2108-0AA06-0AA5

SIMATIC Energy Suite V16, engineering software in TIA Portal; Floating License; SW and documentation on CD; license key on a USB stick; Class A; 6 languages: de,en,fr,es,it,zh; contains license certificate for 10 energy objects (2×5 EnO). Content: set (1x DVD + 1x USB)

6AV2108-0AA06-0AA7

SIMATIC Energy Suite Trial V16; engineering software in TIA Portal; Trial License; SW and documentation on CD; Class A; 6 languages: de,en,fr,es,it,zh. Content: 1x DVD

6AV2108-0AA06-0AH5

SIMATIC Energy Suite V16, engineering software in the TIA Portal; Floating License; software, documentation and license key for download; class A; 6 languages: de,en,fr,es,it,zh; contains license certificates for 10 energy objects (2×5 EnO) as pdf for download. Email address required for delivery

6AV2108-0CF00-0BB0

SIMATIC Energy Suite S7-1500, Single Runtime License; contains license certificate for 5 energy objects (1×5 EnO); Class A, executable on all S7-1500 CPU (without S7-1500S) and ET 200SP CPU Firmware V2.0 or higher

6AV2108-0CF00-0BH0

SIMATIC Energy Suite S7-1500, Single Runtime License download contains license certificate for 5 energy objects (1×5 EnO) as pdf for download, class A; executable on all S7-1500 CPU (without S7-1500S) and ET 200SP CPU Firmware V2.0 or higher. Email address required for delivery

6AV2108-0CH00-0BB0

SIMATIC Energy Suite S7-1500, Single Runtime License; contains license certificate for 10 energy objects (1×10 EnO); Class A, executable on all S7-1500 CPU (without S7-1500S) and ET 200SP CPU Firmware V2.0 or higher

6AV2108-0CH00-0BH0

SIMATIC Energy Suite S7-1500, Single Runtime License download contains license certificate for 10 energy objects (1×10 EnO) as pdf for download, class A; executable on all S7-1500 CPU (without S7-1500S) and ET 200SP CPU Firmware V2.0 or higher. Email address required for delivery

6AV2108-0DF00-0BB0

SIMATIC Energy Suite S7-1500, Single Runtime License; contains license certificate for 10 energy objects (2×5 EnO); Class A, executable on all S7-1500 CPU (without S7-1500S) and ET 200SP CPU Firmware V2.0 or higher

Đặc trưng vượt trội của SIMATIC Energy Suite

Energy measurement and load management

  • Integrated into the TIA Portal and automation
  • Easy and intuitive configuration of energy data recording and of load management instead of complex manual programming
  • Automatic generation of the PLC energy program for S7-1500 controllers
  • Generation of Energy Suite screens with SiVArc (no SiVArc license required)
  • Archiving in the tags archive of WinCC Professional or on the PLC-internal SIMATIC Memory Card

Production-related energy efficiency of machines (energy efficiency monitor for machines):

  • Production-related and standardized determination of energy consumption in machines (in accordance with VDMA 34179)
  • Easy integration into machine control system (S7-1500 / S7-1200) and on-site visualization of the efficiency status and the energy performance indicators (EnPI)
  • Automatic long-term measurements (e.g. batch, layer)
  • Creation of an efficiency log (.csv) for detailed evaluation and documentation

Thiết kế của SIMATIC Energy Suite

SIMATIC Energy Suite Tren TIA Portal

SIMATIC Energy Suite consists of the following components:

Engineering components (TIA Portal):

  • Adds new, integrated editors to the TIA Portal for configuring the energy recording and load management system
  • Library with preconfigured WinCC Professional screens for displaying energy consumption and the load management system
  • Includes S7 program generator for the automatic generation of the complete S7 program
    • For acquisition, processing, buffering and archiving (WinCC Professional or SIMATIC Memory Card) of the basic energy values relevant to billing (power rating and energy)
    • For the priority-controlled connection and disconnection of loads and producers
    • Also for the extended energy values (including voltage, current, frequency) for measuring devices that offer this function and are supported within the scope of the Energy Support Library (see below).

WinCC Runtime components (toolbox for WinCC Professional):

  • Export tool for exporting the energy data archived periodically in WinCC Professional in Excel files
  • Transfer tool for buffered communication of the periodic energy values relevant to billing from S7-1500 CPUs to the tag archive of WinCC Professional

S7 driver block library (Energy Support Library – EnSL):

  • Contains S7 blocks for simplified communication with measuring components from the product families SIMATIC, SENTRON, SINAMICS, SIRIUS and SIMOCODE.
    Installation of the Energy Support Library (EnSL) enables the supported devices to be recognized by the Energy Suite. They can then be configured as energy data sources simply by selecting the devices – making complex communication programming unnecessary.

Chức năng chính của SIMATIC Energy Suite

Simple configuration direct in the TIA Portal

The SIMATIC Energy Suite is an option package for STEP 7 and WinCC (TIA Portal) which integrates new editors into the engineering HMI of the TIA Portal. These editors can be used to create and configure energy measuring points (‘acquisition objects’) and load management actuators (‘actuator objects’) in a simple manner.

Automatic program generation instead of complex programming

Following the completed configuration of all energy objects (acquisition objects and actuator objects), the S7 energy program is automatically generated by the program generator of the Energy Suite. This energy program can be downloaded to the controller (S7-1500) immediately after the compilation. The recording objects begin recording and pre-processing the energy values immediately after the start-up of the PLC.

Energy data recording and preprocessing is already carried out in the automation environment, close to the consumers

The recorded energy data is standardized and calculated according to the set archiving period, provided with a time stamp, and is ready for archiving.

Free choice of archive location

Archiving of the power rating and energy values relevant to billing can be made directly on the PLC-internal SIMATIC Memory Card or in a connected WinCC Professional archive.

  • Archiving on SIMATIC Memory Card
    The energy data is directly saved on the CPU-internal SIMATIC Memory Card according to the respective archiving period. The data is always available there as a CSV file for direct downloading via the CPU’s web server
  • Archiving in the WinCC Professional archive
    The basic energy data (power rating and energy values) relevant to billing is saved in the archive of a connected WinCC Professional system according to the respective archiving period.
    Buffered communication
    To ensure high data quality, the basic energy data (power rating and energy values) is buffered in the WinCC archive prior to transfer. This data relevant to billing is then still available in the WinCC archive without losses or errors, even after a longer interruption in communication with the archive system (e.g. when restarting the PC or when there is a fault in the IT infrastructure).

Export tool for simple reading of energy data

The power rating and energy data (basic energy values relevant to billing) in the archive of the WinCC Professional system can be directly exported from the archive database to an Excel file using the supplied export tool. It is possible to create individual export templates with free selection of measuring points and time periods. These templates can subsequently be started fully automatically, or manually at a time selected by the user (e.g. at the beginning of each month).

Display and monitoring of the energy data

Bang Du Lieu SIMATIC Energy Suite

When generating the energy program, the power rating and energy data (basic energy values relevant to billing) of the individual measuring points (acquisition objects) are made available in uniform S7 blocks with standardized data structures. These data include all the relevant configuration data in addition to the current and periodic energy values. Thanks to this central and homogenized provision of data in the S7 CPU, it is very easy to implement additional real-time monitoring and evaluation (e.g. calculation of key statistics) in the control program, as well as uniform visualization of the energy data and energy parameters on HMI and SCADA screens.

New as of V16: Automatic screen generation with SIMATIC Visualization Architect (SiVArc)

Especially in larger configurations, the screens for energy recording and load management objects can be automatically generated through the use of the SiVArc option package, which saves time. To this end, an additional installation of SiVArc on the same station as Energy Suite is required. However, no SiVArc license is required for the exclusive generation of the Energy Suite screens.

New as of V16: PLC-based load management

In the corresponding editors of the TIA Portal, a load management system is first created and a recording object is assigned to it as an infeed signal. The individual actuator objects are then created in this load management system and their basic properties are configured. Actuators of the type load and producer can be configured. For each actuator type, a distinction can be made between a binary-switching (on/off) or an analog-switching (0-100%) behavior. After the S7 program has been successfully generated and downloaded to the PLC and WinCC Professional Runtime has been activated, the runtime parameters of the load management system and of the associated actuator objects are set – this primarily includes the output limit, the priorities, and the chronological limit values of the actuators. With these settings, if the set output limits are exceeded, the load management system will escalate the configured actuators based on their priority and availability (disconnection of loads or connection of producers). When the current power consumption once again drops below the output limit, the load management system de-escalates these actuators (also in accordance with the respective priorities).

MESIDAS.COM chuyên cung cấp license (key/code) cấp phép/ kích hoạt bản quyền cho các phần mềm tự động hóa Siemens. Nếu bạn đang cần tư vấn, báo giá hay mua license SIMATIC Energy Suite thì hãy liên hệ với MESIDAS GROUP để được hỗ trợ một cách nhanh chóng, hiệu quả và tận tâm nhé.

0 0 votes
Article Rating
Nhận thông báo qua Email
Nhận thông báo cho
guest

0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x