Switch PoE công nghiệp 8-port (8 cổng IEEE 802.3af PoE) + 2G SFP Gigabit Managed CME-822E

Mô tả switch PoE công nghiệp 8-port (8 cổng IEEE 802.3af PoE) + 2G SFP Gigabit Managed CME-822E.

Cung cấp switch công nghiệp sử dụng công nghệ mới nhất Power over Ethernet (PoE) hỗ trợ IEEE 802.3af, 802.3at và 802.3bt. Các dòng thiết bị chuyển mạch công nghiệp của chúng tôi hỗ trợ nhiều chức năng mạng như: STP/RSTP/MSTP/ ITU-T G.8032 ERPS và các chức nâng quản lý PoE nâng cao như lập lịch, tự động kiểm tra và tự động thiết lập lại.

Mô tả Switch PoE công nghiệp CME-822E

Đặc trưng của switch PoE công nghiệp managed

• High Performance Network Switching Technology
• Tuân thủ tiêu chuẩn IEEE
• Cung cấp nhiều cổng Gigabit TX với đầu nối RJ-45, hỗ trợ Green Ethernet IEEE802.3az EEE (Energy Efficient Ethernet)
• Cung cấp nhiều khe cắm Gigabit SFP, hỗ trợ DDMI
• Advanced PoE Management, PoE PD Failure Auto Checking and auto reset when PD fail, PoE port on/off weekly scheduling, PoE configuration for power planning
• Hỗ trợ các giải pháp dự phòng mạng khác nhau như: Direct-Ring, Direct-Chain, Join-Ring, STP, RSTP, MSTP và ITU-T G.8032
• Công nghệ độc quyền cho tốc độ cực cao với thời gian phục hồi <10ms @250 thiết bị
• Hỗ trợ IEEE1588 PTP V2 đồng bộ hóa thời gian chính xác, có thể hoạt động với Ordinary-Boundary, Peer to Peer Transparent Clock, End to End Transparent Clock, Master, Slave tùy theo từng cổng.
• Hỗ trợ các giải pháp bảo mật mạng khác nhau, Port và MAC based IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
• Hỗ trợ các tùy chọn DHCP Server/ Client/ Relay/ Snooping/ Snooping 82/ Relay 82
• Network traffic priority, QoS, Traffic classification QoS, CoS, bandwidth control for Ingress/Egress, broadcast storm control, DiffServ
• Hỗ trợ IEEE802.1Q VLAN, MAC-based VLAN, IP Subnet-based VLAN, Protocol-based VLAN, VLAN translation, GVRP/MVRP
• Hỗ trợ IGMP/MLD snooping V1/V2/V3, IGMP Filtering/Throttling, IGMP query, IGMP proxy reporting, MLD snooping
• Hỗ trợ IEEE 802.3ad LACP Link Aggregation, Static Link Aggregation
• Hỗ trợ giám sát RMON, MIB II, Port mirroring, Syslog, IEEE802.1ab LLDP
• Hỗ trợ IPv6 Telnet server, ICMPv6
• Hỗ trợ quản lý CLI, quản lý trên nền tảng Web, SNMP v1/v2c/v3, Telnet server
• Hỗ trợ nâng cấp phần mềm qua TFTP & HTTP

Nguồn cấp cho switch PoE công nghiệp managed

• Hỗ trợ nguồn cấp 48/-48VDC cho CMG-428EPZ2BT và CMG-1688EPZ2AT series
• Hỗ trợ nguồn cấp 24/48 với bộ tăng cường hiệu suất cao tích hợp để tăng lên 55 VDC đầu ra cổng PoE
• Hỗ trợ đầu vào điện áp âm với cổng RS-232 cho CMG-428EPZ2BT và CMG-1688EPZ2AT series
• Có thể điều chỉnh điện áp đầu ra PoE (55Vdc) để ổn định thiết bị cổng PoE và đảm bảo có thể cung cấp nguồn với khoảng cách 100m cho cổng PoE.
• Bảo vệ cổng Ethernet và nguồn với cách ly 2.25K Vdc cho CMG-428EPZ2BT và CMG-1688EPZ2AT series
• Cung cấp 4/8 port IEEE802.3af/802.3at PoE+ output, 30W mỗi cổng
• Cung cấp 4 port IEEE802.3af/802.3at/802.3bt PoE++ output, 60W mỗi cổng cho CMG-428EPZ2BT
• Bảo vệ chống phân cực ngược và bảo vệ quá tải

Chứng nhận switch PoE công nghiệp managed đạt chuẩn

• Chứng nhận UL60950-1, CE, FCC
• Chứng nhận EN 61000-6-2 và EN 61000-6-4 được sử dụng trong môi trường công nghiệp nặng
• Chứng nhận NEMA TS-2 choTraffic Control dành cho CMG-428EPTAT and CMG-838EPTAT series
• Chứng nhận EN 50121-4 dành cho Railway Applications (Track Side)
• Đạt chuẩn công nghiệp IP30
• Nhiệt độ hoạt động từ -10 đến 60°C & có thể mở rộng -40 đến 75°C
• Có thể lắp đặt trên thanh Ray chuẩn DIN-Rail hoặc tùy chọn

Datasheet CME-822E

Features

High Performance Network Switching Technology

• Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3X, IEEE 802.1p, IEEE 802.1q, IEEE 802.1d, IEEE 802.1w,  IEEE 802.1x, IEEE 802.3ad, IEEE 802.3z
• Provides 8 x 10/100 Mbps Ethernet ports with RJ-45 connector
• Provides 2 x 10/100/1000T Mini-GBIC socket (Combo with 1000TX port )
• Embedded 8 ports PoE Injector Function classified as PSE
• Supplies 15.4 watts of power per port full load with PoE
• RJ-45 Port support auto MDI/MDI-X crossover
• Provides broadcast storm protection
• Redundant X-Ring recovery time < 10 ms on full load
• Supports Dual Homing – RSTP over X-ring
• Supports Ring coupling
• SNMP for network management
• IGMP snooping for filtering multicast traffic
• QoS / ToS to increase network packet determinism
• VLAN for easy network planning
• Event notification by e-mail, SNMP trap, Syslog & Relay output
• Online Port Mirroring for online debugging
• IP security to define access levels for protection
• Configurable by WEB browser
• IntraVUE Network Management software compatible

Robust Industrial Design

• Robust Aluminum case complying to IP-30 housing standard
• Supports operating temperature -40 to 80 ^oC
• DIN-Rail, Panel mount or desktop installation
• High level of immunity to electromagnetic interference & power supply surges typically found in industrial plant environments or external curb side enclosures

Reliable Power Design

• Wide range redundant power design
• Equipped with Redundant power inputs
• Supports 48VDC redundant power with polarity reverse protection
• Terminal block present for master and slave power

Overview

The Cobra series CME-822E is a highly reliable and fault-tolerant Industrial 10-port Managed Power over Ethernet Switch. It supports eight PoE injector ports classified as power source equipment (PSE). CME-822E offers state of the art design with eight 10/100 Mbps Ethernet ports and two small form pluggable (SFP) ports that supports Gigabit SX or LC depending on your existing network structure. The innovative SFP fiber slot design provides user the flexibility to insert different fiber modules, either multi-mode or single-mode at various distances, whether you require typical 10km or overhaul 40 km, 80 km and 120 km distances. With its high performance switching device, CME-822E provides redundant self-recovery mechanism in less than 10ms on full load which allows you to establish a redundant Ethernet network to build a back-up ring topology. Dual homing and Ring coupling are supported to add reliability by allowing a device to be connected to be network by way of two independent connection points. CME-822E offers powerful network management functions including SNMP, SMTP, SNTP, Quality of Service, Class of Service, IGMP, Snooping, LACP, DHCP, VLAN, RMON, Port Trunk,
Port Mirror, User Authentication (Radius) and IP Security. The CME-822E is equipped with a terminal block to provide dual power inputs with reverse polarity protection. Its IP-30 housing protection, wide operating temperature of -40 to 80 and DIN-Rail mounting is suitable for an industrial environment. The CME-822E is a plug-and-play solution for your Power over Ethernet applications.

Hardware Specifications

Interface

• RJ-45 Ports: 8 10/100Base-TX auto-negotiation speed, Full/Half duplex, auto MDI/MDI-X (PoE ports)
• Fiber Port: 2 10/100/1000T Mini-GBIC socket (Combo with 1000TX port )
• LEDs
  • Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Yellow), Master (Green)
  • 8 port 10/100: Link/Activity (Green), Full duplex/Collision (Yellow)
  • Mini GBIC: Link/Activity (Green)
  • Giga Copper: Link/Activity (Green), speed (1000 Green)
• Alarm: Relay output for port break and power failure
• Power Input:
  • VDC 48V
  • Redundant power with polarity reverse protect function and removable terminal block
• Power Protection
  • ESD (Ethernet) : Present
  • Surge : 1500VDC
  • Power Reverse Polarity: Present
• Power Consumption: 9.64 watts
• Dimensions: IP-30 standard, 72 mm (W) x 152 mm (H) x 105 mm (D)
• Installation: DIN-Rail, Panel mount or desktop

Environmental

• Operating Temperature: Extended: -40 to 80 ^oC
• Storage Temperature: -40 to 85 ^oC (-40 to 185 ^oF)
• Operating Humidity: 5%~90% RH (Non-condensing)

Technology Specifications

• Standard
  • IEEE 802.3 10Base-T Ethernet
  • IEEE 802.3u 100Base-TX
  • IEEE802.3ab 1000Base-T
  • IEEE802.3z Gigabit fiber
  • IEEE802.3x Flow Control and Back Pressure
  • IEEE802.3ad Port trunk with LACP
  • IEEE802.3af Power over Ethernet
  • IEEE802.1d Spanning Tree/ IEEE802.1w Rapid Spanning Tree
  • IEEE802.1p Class of Service
  • IEEE802.1Q VLAN Tag
  • IEEE 802.1x User Authentication (Radius)
• Network Media
  • 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5/ 5E cable
  • EIA/TIA-568 100-ohm (100m)
  • 100Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
  • EIA/TIA-568 100-ohm (100m)
  • 1000Base-TX: 2-pair UTP/STP Cat. 5/ 5E cable
  • EIA/TIA-568 100-ohm (100m)
• Protocol Technology: CSMA/CD
• Switching Architecture: Store and Forward

Performance

• Data Transfer Rate
  • 14,880 pps for Ethernet port
  • 148,800 pps for Fast Ethernet port
  • 1,488,000pps for Gigabit Fiber Ethernet port
• MAC Address: 8K
• Memory Buffer: 4Mbytes
• Back-plane:  5.6 Gbps
• Port Statistics: Supported
• Flow Control: Full-duplex and Back Pressure for Half-duplex
• Packet Filter: Broadcast/Multi-cast/Unknown Broadcast storm packet filter
• Transfer Packet Size: 8.3 Mpps at 64 bytes

Regulatory Approvals

• EMI: FCC Class A
• EMS
  • EN6100-4-2
  • EN6100-4-3
  • EN-6100-4-4
  • EN6100-4-5
  • EN6100-4-6
  • EN61000-4-8
  • EN61000-4-11
• Safety: UL, cUL, CE/EN60950
• Shock: IEC60068-2-27
• Vibration: IEC60068-2-6
• Free Fall: IEC60068-2-32
• Class 1 DIV 2: Pending *
• DNV: Pending *
• Environmental: WEEE, RoHS
• MTBF: 325,000 hrs based on Mil-Hdbk-217F, GB
• Warranty: 5 years

Management Specifications

• Redundancy
  • Supports X-ring redundant back-up path
  • Supports Dual Homing
  • Supports Ring Coupling.
  • Recovery time less than 10 ms
  • Web interface management can activate X-ring protocol
• Management Protocols
  • SNMP V1/V2c, RMON 1 (Statistics, History, Alarm, Events)
  • SMTP, SNTP, IGMP V1 & Query mode, DHCP/Client, TFTP
• MIB: MIB-II, Bridge MIB, Ethernet like MIB, VLAN MIB, Private MIB
• Configuration
  • Web interface management
  • Default button is available to restore default settings
• VLAN
  • Support Port based VLAN/Tag VLAN(256 entries)
  • VLAN ID(Up to 4K)
  • GVRP(256 Groups)
  • Static VLAN groups up to 256, the VLAN ID can be assigned from 1 to 4094
• Quality of Service: Full-duplex and Back Pressure for Half-duplex
• Port Mirroring: Broadcast/Multi-cast/Unknown Broadcast storm packet filter
• MAC IP Security
  • Supports ingress and egress MAC address filter and static source MAC address lock, Dumping MAC address Table
  • Ingress/Egress MAC address security, per port support learning 50 MAC addresses
• IP Security: Support 10 IP address accounts for system management security for Web, SNMP and Telnet management security to prevent intruder.
• IGMP Snooping: v1 and v2, query mode, multicast group with 256 entries
• LACP Port Trunk: 3 Trunk groups/Maximum 4 trunk members
• Port Mirror: Global system supports 3 mirroring types: “RX, TX and Both packet”. Maximum of 8 entries
• Port Trunk: 802.3ad with LACP function. Up to 3 trunk groups and maximum group member up to 4 ports
• Class of Service: Per port 4 queues
• E-mail Warning: Pre-defined events
• IP Security: Cold start, link down, link up, authorization fail, X-ring topology Change, Power alarm trap, Trap station up to 3
• IGMP Snooping: Support up to 6 e-mail accounts
• Firmware Upgrade: By TFTP

Power over Ethernet Specification

• PoE Compliance: 100% IEEE 802.3af compliant
• PoE Classification: Power Sourcing Equipment (PSE)
• PoE Voltage: 45 to 48 VDC depending on power input
• PoE Power: Up to 15.4 watts per channel
• PoE Pin Assignment
  • RJ-45 port # 1~# 8 support IEEE 802.3af End-point, Alternative B mode
  • Per port provides 15.4W ability
  • Positive (VCC+): RJ-45 pin 4,5
  • Negative (VCC-): RJ-45 pin 7,8
• PoE Protection: Over-temperature, over-current, over/under-voltage and transient

SFP Specifications

• Compliant with IEEE 802.3z Gigabit Ethernet Standard
• Single mode LX versions are compliant with Fiber Channel 100-SM-LC-L standard
• Multimode SX versions are compliant with Fiber Channel 100-M5-SN-I & 100-M6-SN-I
• Industry standard small form pluggable SFP package
• Duplex LC connector
• Single power supply 3.3V
• Class 1 laser product complies with EN 60825-1