6ES7522-1BH10-0AA0 là mô đun mở rộng tín hiệu ngõ ra số cho PLC S7-1500 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-1500. 6ES7522-1BH10-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7522-1BH10-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7522-1BH10-0AA0
SIMATIC S7-1500, digital output module, DQ 16×24 V DC/0.5A BA, 16 channels in groups of 8, 4 A per group; the module supports the safety-oriented shutdown of load groups up to SILCL2 acc. to EN 62061:2005 + A2:2015, and Category 3 / PL d according to EN ISO 13849-1:2015. delivery incl. front connector push-in
Mã sản phẩm | 6ES7522-1BH10-0AA0 |
Dòng sản phẩm | SIMATIC S7-1500, SM 522 |
Hãng sản xuất | SIEMENS |
Số lượng đầu ra số | 16 DQ 24 V DC/0.5A BA |
Nguồn cung cấp | 24 V DC (20.4-28.8 V DC) |
Kích thước (RxCxS) | 25x147x129 mm |
Trọng lượng | 230 g |
Bảng chi tiết thông số kỹ thuật 6ES7522-1BH10-0AA0
Article number | 6ES7522-1BH10-0AA0 |
S7-1500, DQ 16x24VDC/0.5A BA | |
General information | |
Product type designation | DQ 16x24VDC/0.5A BA |
HW functional status | FS01 |
Firmware version | |
● FW update possible | Yes |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Isochronous mode | No |
● Prioritized startup | Yes |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated from version | V13 / V13 |
● STEP 7 configurable/integrated from version | V5.5 SP3 / – |
● PROFIBUS from GSD version/GSD revision | V1.0 / V5.1 |
● PROFINET from GSD version/GSD revision | V2.3 / – |
Operating mode | |
● DQ | Yes |
● DQ with energy-saving function | No |
● PWM | No |
● Oversampling | No |
● MSO | Yes |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 20.4 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes; through internal protection with 7 A per group |
Input current | |
Current consumption, max. | 30 mA |
Output voltage | |
Rated value (DC) | 24 V |
Power | |
Power available from the backplane bus | 1.15 W |
Power loss | |
Power loss, typ. | 2.2 W |
Digital outputs | |
Type of digital output | Transistor |
Number of digital outputs | 16 |
Current-sourcing | Yes |
Digital outputs, parameterizable | No |
Short-circuit protection | Yes |
● Response threshold, typ. | 1 A |
Limitation of inductive shutdown voltage to | L+ (-53 V) |
Controlling a digital input | Yes |
Switching capacity of the outputs | |
● with resistive load, max. | 0.5 A |
● on lamp load, max. | 5 W |
Load resistance range | |
● lower limit | 48 Ω |
● upper limit | 12 kΩ |
Output voltage | |
● for signal “1”, min. | L+ (-0.8 V) |
Output current | |
● for signal “1” rated value | 0.5 A |
● for signal “1” permissible range, max. | 0.5 A |
● for signal “0” residual current, max. | 0.5 mA |
Output delay with resistive load | |
● “0” to “1”, max. | 100 µs |
● “1” to “0”, max. | 500 µs |
Parallel switching of two outputs | |
● for logic links | Yes |
● for uprating | No |
● for redundant control of a load | Yes |
Switching frequency | |
● with resistive load, max. | 100 Hz |
● with inductive load, max. | 0.5 Hz; According to IEC 60947-5-1, DC-13 |
● on lamp load, max. | 10 Hz |
Total current of the outputs | |
● Current per channel, max. | 0.5 A; see additional description in the manual |
● Current per group, max. | 4 A; see additional description in the manual |
● Current per module, max. | 8 A; see additional description in the manual |
Cable length | |
● shielded, max. | 1 000 m |
● unshielded, max. | 600 m |
Interrupts/diagnostics/status information | |
Diagnostics function | No |
Substitute values connectable | No |
Alarms | |
● Diagnostic alarm | No |
● Maintenance interrupt | No |
Diagnoses | |
● Monitoring the supply voltage | No |
● Wire-break | No |
● Short-circuit | No |
● Group error | No |
Diagnostics indication LED | |
● RUN LED | Yes; green LED |
● ERROR LED | Yes; red LED |
● Monitoring of the supply voltage (PWR-LED) | Yes; green LED |
● Channel status display | Yes; green LED |
● for channel diagnostics | No |
● for module diagnostics | No |
Potential separation | |
Potential separation channels | |
● between the channels | No |
● between the channels, in groups of | 8 |
● between the channels and backplane bus | Yes |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
Suitable for safety functions | No |
Suitable for safety-related tripping of standard modules | Yes; From FS02 |
Highest safety class achievable for safety-related tripping of standard modules | |
● Performance level according to ISO 13849-1 | PL d |
● Category according to ISO 13849-1 | Cat. 3 |
● SILCL according to IEC 62061 | SILCL 2 |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
Dimensions | |
Width | 25 mm |
Height | 147 mm |
Depth | 129 mm |
Weights | |
Weight, approx. | 230 g |
Other | |
Note: | Supplied incl. 40-pole push-in front connectors |
Nhà phân phối & báo giá 6ES7522-1BH10-0AA0
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7522-1BH10-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.