6ES7322-1FH00-0AA0 là mô đun mở rộng đầu ra số cho PLC S7-300 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. 6ES7322-1FH00-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7322-1FH00-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Bảng tóm tắt thông số kỹ thuật 6ES7322-1FH00-0AA0
SIMATIC S7-300, Digital output SM 322, Isolated 16 DO, 120/230 V AC, 1 A, 1x 20-pole
Mã sản phẩm | 6ES7322-1FH00-0AA0 |
Dòng sản phẩm | SIMATIC S7-300, SM 322 |
Hãng sản xuất | SIEMENS |
Số lượng đầu ra số | 16DO, 120/230V AC, 1A |
Nguồn cung cấp | 230 V; 120/230 V AC |
Kích thước (RxCxS) | 40x125x120 mm |
Trọng lượng | 275 g |
Bảng chi tiết thông số kỹ thuật 6ES7322-1FH00-0AA0
Article number | 6ES7322-1FH00-0AA0 |
SM322, 16DO, 120/230V AC, 1A | |
Supply voltage | |
Mains buffering | |
Mains/voltage failure stored energy time | |
Load voltage L+ | |
Rated value (DC) | |
permissible range, lower limit (DC) | |
permissible range, upper limit (DC) | |
Reverse polarity protection | |
Load voltage L1 | |
Rated value (AC) | 230 V; 120/230 V AC |
permissible range, lower limit (AC) | 79 V |
permissible range, upper limit (AC) | 264 V |
permissible frequency range, lower limit | |
permissible frequency range, upper limit | |
Input current | |
from supply voltage L+, max. | |
from load voltage L+ (without load), max. | |
from load voltage L1 (without load), max. | 2 mA |
from backplane bus 5 V DC, max. | 200 mA |
Power loss | |
Power loss, typ. | 8.6 W |
Digital outputs | |
Number of digital outputs | 16 |
Short-circuit protection | Yes; Fuse 8 A, 250 V; per group |
Response threshold, typ. | |
required current for fuse shutdown, min. | 40 A |
Response time, max. | 300 ms |
Limitation of inductive shutdown voltage to | |
Controlling a digital input | Yes |
Size of motor starters according to NEMA, max. | 4 NEMA compliant |
Spare fuses | 8 A / quick response |
Zero-crossing switch | |
Switching capacity of the outputs | |
on lamp load, max. | 50 W |
Load resistance range | |
lower limit | |
upper limit | |
Output voltage | |
for signal “1”, min. | |
for signal “1” (at max. current), min. | L1 (-1.5 V) |
for signal “1” (at min. current), min. | L1 (-8.5 V) |
Output current | |
for signal “1” rated value | 1 A |
for signal “1” permissible range for 0 to 40 °C, min. | 10 mA |
for signal “1” permissible range for 0 to 40 °C, max. | 1 A |
for signal “1” permissible range for 40 to 60 °C, min. | 10 mA |
for signal “1” permissible range for 40 to 60 °C, max. | 0.5 A |
for signal “1” minimum load current | 10 mA |
for signal “1” permissible surge current, max. | 20 A; with 2 half waves |
for signal “0” residual current, max. | 2 mA |
Output delay with resistive load | |
“0” to “1”, max. | |
“1” to “0”, max. | |
Parallel switching of two outputs | |
for uprating | No |
for redundant control of a load | Yes; only outputs of the same group |
Switching frequency | |
with resistive load, max. | 10 Hz |
with inductive load, max. | 0.5 Hz |
with inductive load (acc. to IEC 60947-5-1, DC13), max. | |
with inductive load (acc. to IEC 60947-5-1, AC15), max. | 0.5 Hz |
on lamp load, max. | 1 Hz |
Total current of the outputs (per group) | |
horizontal installation | |
— up to 40 °C, max. | 4 A |
— up to 50 °C, max. | |
— up to 60 °C, max. | 2 A |
vertical installation | |
— up to 40 °C, max. | 2 A |
Cable length | |
shielded, max. | 1 000 m |
unshielded, max. | 600 m |
Interrupts/diagnostics/status information | |
Alarms | |
Diagnostics function | Yes; Fuse blown or load voltage missing |
Alarms | |
Diagnostic alarm | No |
Diagnoses | |
Diagnostic information readable | |
Wire-break | No |
Short-circuit | No |
Fuse blown | Yes |
missing load voltage | No |
Diagnostics indication LED | |
Rated load voltage PWR (green) | No |
Fuse OK FSG (green) | Yes; Red LED for fuse |
Group error SF (red) | Yes |
Status indicator digital output (green) | Yes |
Potential separation | |
Potential separation digital outputs | |
between the channels | |
between the channels, in groups of | 8 |
between the channels and backplane bus | Yes; Optocoupler |
between the channels and the power supply of the electronics | |
Isolation | |
Isolation tested with | 4 000 V DC |
Connection method | |
required front connector | 20-pin |
Dimensions | |
Width | 40 mm |
Height | 125 mm |
Depth | 120 mm |
Weights | |
Weight, approx. | 275 g |
Phân phối và báo giá 6ES7322-1FH00-0AA0
Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7322-1FH00-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.