6ES7321-7BH01-0AB0 là mô đun mở rộng đầu vào số cho PLC S7-300 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. 6ES7321-7BH01-0AB0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7321-7BH01-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Bảng tóm tắt thông số kỹ thuật 6ES7321-7BH01-0AB0
SIMATIC S7-300, Digital input SM 321, isolated, 16 DI; 24 V DC, 1x 20-pole, process interrupt, diagnostics, suitable for isochronous mode
Mã sản phẩm | 6ES7321-7BH01-0AB0 |
Dòng sản phẩm | SIMATIC S7-300, SM 321 |
Hãng sản xuất | SIEMENS |
Số lượng đầu vào số | 16 DI, 24 V DC |
Nguồn cung cấp | 24 V DC (20.4-28.8V DC) |
Kích thước (RxCxS) | 40x125x120 mm |
Trọng lượng | 200 g |
Bảng chi tiết thông số kỹ thuật 6ES7321-7BH01-0AB0
Article number | 6ES7321-7BH01-0AB0 |
SM321, 16DI, 24V DC | |
Supply voltage | |
Load voltage L+ | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 20.4 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Load voltage L1 | |
Rated value (AC) | |
permissible range, lower limit (AC) | |
permissible range, upper limit (AC) | |
Input current | |
from load voltage L+ (without load), max. | 90 mA |
from backplane bus 5 V DC, max. | 130 mA |
Encoder supply | |
Number of outputs | 2 |
Type of output voltage | L+ (-2.5 V) |
Short-circuit protection | Yes; Electronic |
additional (redundant) feed | Yes |
Output current | |
Rated value | 120 mA |
permissible range, lower limit | 0 mA |
permissible range, upper limit | 150 mA |
Power loss | |
Power loss, typ. | 4 W |
Digital inputs | |
Number of digital inputs | 16 |
Input characteristic curve in accordance with IEC 61131, type 1 | |
Input characteristic curve in accordance with IEC 61131, type 2 | Yes |
horizontal installation | |
— up to 40 °C, max. | 16 |
— up to 60 °C, max. | 16 |
vertical installation | |
— up to 40 °C, max. | 16 |
Input voltage | |
Type of input voltage | DC |
Rated value (DC) | 24 V |
Rated value (AC) | |
for signal “0” | -30 to +5 V |
for signal “1” | 13 to 30V |
Input current | |
for signal “0”, min. | |
for signal “0”, max. (permissible quiescent current) | |
for signal “1”, typ. | 7 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
— parameterizable | Yes; 0.1 / 0.5 / 3 / 15 / 20 ms |
— at “0” to “1”, min. | |
— at “0” to “1”, max. | |
— at “1” to “0”, min. | |
— at “1” to “0”, max. | |
Encoder connection | |
Fixed current limitation for wire-break monitoring, min. | 10 kΩ |
Fixed current limitation for wire-break monitoring, max. | 18 kΩ |
Cable length | |
shielded, max. | 1 000 m |
unshielded, max. | 600 m |
Encoder | |
Connectable encoders | |
2-wire sensor | Yes |
— permissible quiescent current (2-wire sensor), max. | 2 mA |
Interrupts/diagnostics/status information | |
Alarms | Yes |
Diagnostics function | Yes; Parameterizable |
Alarms | |
Diagnostic alarm | Yes; Parameterizable |
Hardware interrupt | Yes; Parameterizable |
Diagnoses | |
Diagnostic information readable | Yes |
Wire-break | Yes; to I< 1 mA |
Diagnostics indication LED | |
Group error SF (red) | Yes |
Status indicator digital input (green) | Yes |
Encoder supply Vs (green) | Yes |
Potential separation | |
Potential separation digital inputs | |
between the channels | No |
between the channels, in groups of | 16 |
between the channels and backplane bus | Yes; Optocoupler |
Isolation | |
Isolation tested with | 500 V DC |
Connection method | |
required front connector | 20-pin |
Dimensions | |
Width | 40 mm |
Height | 125 mm |
Depth | 120 mm |
Weights | |
Weight, approx. | 200 g |
Phân phối và báo giá 6ES7321-7BH01-0AB0
Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7321-7BH01-0AB0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.