6ES7305-1BA80-0AA0 PS 305 24-110VDC 24VDC/2A SIMATIC S7-300

8.262.000 

SIMATIC S7-300 with Regulated power supply PS305 input: 24-110 V DC output: 24 V DC/2 A.

Tải về datasheet (pdf): Tại đây!

6ES7305-1BA80-0AA0 là mô đun cấp nguồn cho PLC S7-300 do hãng SIEMENS phát triển & sản xuất với thương hiệu SIMATIC thuộc họ S7-300. 6ES7305-1BA80-0AA0 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7305-1BA80-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

6ES7305-1BA80-0AA0

Bảng tóm tắt thông số kỹ thuật 6ES7305-1BA80-0AA0

SIMATIC S7-300 with Regulated power supply PS305 input: 24-110 V DC output: 24 V DC/2 A

Mã sản phẩm 6ES7305-1BA80-0AA0
Dòng sản phẩm SIMATIC S7-300, PS 305
Hãng sản xuất SIEMENS
Nguồn cung cấp 24-110 V DC
Nguồn đầu ra 24 V DC/ 2 A
Kích thước (RxCxS) 80x125x120 mm
Trọng lượng 570 g

Bảng chi tiết thông số kỹ thuật 6ES7305-1BA80-0AA0

Article number 6ES7305-1BA80-0AA0
Product PS 305 Outdoor
Power supply, type 24 V/2 A
Input
Input DC voltage
Note
supply voltage
1 at AC rated value
2 at AC rated value
at DC 24 … 110 V
input voltage
1 at AC
2 at AC
at DC 16.8 … 138 V
Wide-range input Yes
Overvoltage resistance 154 V; 0.1 s
Mains buffering at Vin rated
Mains buffering at Iout rated, min. 10 ms; at Vin rated
Rated line frequency 1
Rated line frequency 2
Rated line range
input current
at rated input voltage 120 V
at rated input voltage 230 V
at rated input voltage 24 V 2.4 A
at rated input voltage 110 V 0.6 A
Switch-on current limiting (+25 °C), max. 20 A
duration of inrush current limiting at 25 °C
maximum 10 ms
I²t, max. 5 A²·s
Built-in incoming fuse T 6.3 A/250 V (not accessible)
Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A characteristic C, suitable for DC
Output
Output Controlled, isolated DC voltage
Rated voltage Vout DC 24 V
Total tolerance, static ± 3 %
Static mains compensation, approx. 0.2 %
Static load balancing, approx. 0.4 %
Residual ripple peak-peak, max. 150 mV
Residual ripple peak-peak, typ. 30 mV
Spikes peak-peak, max. (bandwidth: 20 MHz) 240 mV
Spikes peak-peak, typ. (bandwidth: 20 MHz) 150 mV
product function output voltage adjustable No
Output voltage setting
Status display Green LED for 24 V OK
On/off behavior No overshoot of Vout (soft start)
Startup delay, max. 3 s
Voltage rise, typ. 5 ms
Rated current value Iout rated 2 A
Current range 0 … 3 A
Note 3 A up to +60°C at Vin > 24 V
supplied active power typical 48 W
short-term overload current
on short-circuiting during the start-up typical 9 A
at short-circuit during operation typical 9 A
duration of overloading capability for excess current
on short-circuiting during the start-up 270 ms
at short-circuit during operation 270 ms
Parallel switching for enhanced performance Yes
Numbers of parallel switchable units for enhanced performance 2
Efficiency
Efficiency at Vout rated, Iout rated, approx. 75 %
Power loss at Vout rated, Iout rated, approx. 16 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max. 0.3 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 2.5 %
Load step setting time 50 to 100%, typ. 2.5 ms
Load step setting time 100 to 50%, typ. 2.5 ms
setting time maximum 5 ms
Protection and monitoring
Output overvoltage protection Additional control loop, shutdown at approx. 30 V, automatic restart
Current limitation 3.3 … 3.9 A
property of the output short-circuit proof Yes
Short-circuit protection Electronic shutdown, automatic restart
enduring short circuit current RMS value
maximum 2 A
Overload/short-circuit indicator
Safety
Primary/secondary isolation Yes
galvanic isolation Safety extra low output voltage Vout according to EN 60950-1 and EN 50178, creepage distances and clearances > 5 mm
Protection class Class I
leakage current
maximum
typical
Degree of protection (EN 60529) IP20
Approvals
CE mark Yes
UL/cUL (CSA) approval UL-Listed (UL 508), File E143289, CSA (CSA C22.2 No. 142)
Explosion protection
certificate of suitability NEC Class 2 No
FM approval
CB approval No
certificate of suitability EAC approval Yes
Marine approval
EMC
Emitted interference EN 55011 Class A
Supply harmonics limitation not applicable
Noise immunity EN 61000-6-2
environmental conditions
ambient temperature
during operation -25 … +70 °C
— Note with natural convection
during transport -40 … +85 °C
during storage -40 … +85 °C
Humidity class according to EN 60721 Climate class 3K5, transient condensation permitted
Mechanics
Connection technology screw-type terminals
Connections
Supply input L+1, M1, PE: 1 screw terminal each for 0.5 … 2.5 mm² single-core/finely stranded
Output L+, M: 3 screw terminals each for 0.5 … 2.5 mm²
Auxiliary
width of the enclosure 80 mm
height of the enclosure 125 mm
depth of the enclosure 120 mm
required spacing
top 50 mm
bottom 50 mm
left 0 mm
right 0 mm
Weight, approx. 0.57 kg
product feature of the enclosure housing can be lined up Yes
Installation Can be mounted onto S7 rail
mechanical accessories Mounting adapter for standard mounting rail (6ES7390-6BA00-0AA0)
MTBF at 40 °C 964 506 h
other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Phân phối và báo giá 6ES7305-1BA80-0AA0

Nếu quý khách hàng đang có nhu cầu cần tư vấn hay mua 6ES7305-1BA80-0AA0 thì hãy liên hệ MESIDAS GROUP để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.

5/5 - (1 bình chọn)
Trọng lượng 0,570 kg
Kích thước 8 × 12,5 × 12 cm
Nhận thông báo qua Email
Nhận thông báo cho
guest

Mới nhất
Cũ nhất
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x