6ES7132-6HD01-0BB1 RQ 4×120-230 VAC/5A NO ST SIMATIC ET 200SP
Liên hệ
SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour Code CC40, substitute value output, module diagnostics for: supply voltage.
Tải về datasheet (pdf): Tại đây!
6ES7132-6HD01-0BB1 là module mở rộng đầu ra số (digital output module) cho CPU ET200SP được hãng SIEMENS sản xuất & phát triển với thương hiệu SIMATIC thuộc dòng ET 200. 6ES7132-6HD01-0BB1 được MESIDAS GROUP phát triển và phân phối rộng rãi trên thị trường Việt Nam. Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6HD01-0BB1 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Mục lục
Bảng tóm tắt thông số kỹ thuật 6ES7132-6HD01-0BB1
SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour Code CC40, substitute value output, module diagnostics for: supply voltage
| Mã sản phẩm | 6ES7132-6HD01-0BB1 |
| Dòng sản phẩm | SIMATIC ET 200SP, RQ 4×120 VDC … 230 VAC/5 A NO ST |
| Hãng sản xuất | SIEMENS |
| Số lượng đầu ra số | RQ NO 4x 120V DC..230VAC/5A ST |
| Nguồn cung cấp | 24 V DC (19.2 – 28.8 V DC) |
| Kích thước (RxCxS) | 20 x 73 x 58 mm |
| Trọng lượng | 40 g |
Bảng chi tiết thông số kỹ thuật 6ES7132-6HD01-0BB1
| Article number | 6ES7132-6HD01-0BB1 |
| ET 200SP, RQ NO 4x 120VDC..230VAC/5A,PU1 | |
| General information | |
| Product type designation | RQ 4×120 VDC … 230 VAC/5 A NO ST |
| HW functional status | From FS02 |
| Firmware version | V0.0 |
| ● FW update possible | No |
| usable BaseUnits | BU type B0, B1 |
| Color code for module-specific color identification plate | CC40 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V14 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 |
| ● PCS 7 configurable/integrated from version | V8.1 SP1 |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● DQ | Yes |
| ● DQ with energy-saving function | No |
| ● PWM | No |
| ● Oversampling | No |
| ● MSO | No |
| ● Phase control | |
| ● Trailing-edge phase | |
| ● Half-wave | |
| ● Full-wave | |
| Redundancy | |
| ● Redundancy capability | Yes |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Rated value (AC) | |
| permissible range, lower limit (AC) | |
| permissible range, upper limit (AC) | |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption (rated value) | 55 mA; without load |
| Current consumption, max. | |
| Output voltage | |
| Rated value (AC) | 230 V |
| Power loss | |
| Power loss, typ. | 1.5 W |
| Address area | |
| Address space per module | |
| ● Inputs | + 1 byte for QI information |
| ● Outputs | 1 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | type C |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | |
| ● 2-wire connection | BU type B1 |
| ● 3-wire connection | BU type B0 |
| Digital outputs | |
| Type of digital output | Relays |
| Number of digital outputs | 4 |
| Current-sinking | Yes |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | No |
| Open-circuit detection | |
| ● Response threshold, typ. | |
| Overload protection | |
| Controlling a digital input | |
| Switching capacity of the outputs | |
| ● with resistive load, max. | |
| ● with inductive load, max. | |
| ● on lamp load, max. | |
| Output voltage | |
| ● for signal “1”, min. | |
| Output current | |
| ● for signal “1” rated value | |
| ● for signal “1” permissible range, min. | |
| ● for signal “1” permissible range, max. | |
| ● for signal “0” residual current, max. | |
| Output delay with resistive load | |
| ● “0” to “1”, max. | |
| ● “1” to “0”, max. | |
| Parallel switching of two outputs | |
| ● for logic links | Yes |
| ● for uprating | No |
| ● for redundant control of a load | Yes |
| Switching frequency | |
| ● with resistive load, max. | 2 Hz |
| ● with inductive load, max. | 0.5 Hz |
| ● with inductive load (acc. to IEC 60947-5-1, AC15), max. | |
| ● on lamp load, max. | 2 Hz |
| Total current of the outputs | |
| ● Current per channel, max. | 5 A |
| ● Current per module, max. | 20 A |
| Total current of the outputs (per module) | |
| horizontal installation | |
| — up to 40 °C, max. | |
| — up to 50 °C, max. | 20 A |
| — up to 60 °C, max. | 16 A |
| vertical installation | |
| — up to 30 °C, max. | |
| — up to 40 °C, max. | 20 A |
| — up to 50 °C, max. | 16 A |
| Relay outputs | |
| ● Number of relay outputs | 4 |
| ● Rated supply voltage of relay coil L+ (DC) | 24 V |
| ● Current consumption of relays (coil current of all relays), max. | 40 mA |
| ● external protection for relay outputs | Yes, with miniature fuse max. 6 A tripping current and quick-response tripping characteristic |
| ● Number of operating cycles, max. | 7 000 000; see additional description in the manual |
| Switching capacity of contacts | |
| — with inductive load, max. | 2 A; see additional description in the manual |
| — with resistive load, max. | 5 A; see additional description in the manual |
| — Thermal continuous current, max. | 5 A; Max. 1 385 VA, 150 W |
| — Switching current, min. | 100 mA; 5 V DC |
| — Rated switching voltage (DC) | 24 V DC to 120 V DC |
| — Rated switching voltage (AC) | 24V AC to 230V AC |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 200 m |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
| ● Diagnostic information readable | |
| ● Monitoring the supply voltage | Yes |
| ● Wire-break | No |
| ● Short-circuit | No |
| ● Group error | |
| Diagnostics indication LED | |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | No |
| ● for module diagnostics | Yes; green/red DIAG LED |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | Yes |
| ● between the channels and backplane bus | Yes |
| ● between the channels and the power supply of the electronics | Yes |
| Permissible potential difference | |
| between channels and backplane bus/supply voltage | 240 V AC |
| Isolation | |
| Isolation tested with | 2 500 V DC (type test) |
| tested with | |
| ● between channels and backplane bus/supply voltage | 2 500 V DC |
| ● between backplane bus and supply voltage | 707 V DC (type test) |
| Standards, approvals, certificates | |
| Suitable for safety functions | No |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 2 000 m; On request: Installation altitudes greater than 2 000 m |
| Dimensions | |
| Width | 20 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weights | |
| Weight, approx. | 40 g |
Phân phối & báo giá 6ES7132-6HD01-0BB1
Nếu quý khách hàng đang có nhu cầu cần tư vấn, báo giá hay mua 6ES7132-6HD01-0BB1 thì hãy liên hệ MESIDAS.COM để được hỗ trợ một cách tận tâm, nhanh chóng và hiệu quả nhé.
Nhận thông báo qua Email
Đăng nhập
